Taming and Leveraging Directionality and Blockage in Millimeter Wave Communications

To cope with the challenge for high-rate data transmission, Millimeter Wave(mmWave) is one potential solution. The short wavelength unlatched the era of directional mobile communication. The semi-optical communication requires revolutionary thinking. To assist the research and evaluate various algorithms, we build a motion-sensitive mmWave testbed with two degrees of freedom for environmental sensing and general wireless communication.The first part of this thesis contains two approaches to maintain the connection in mmWave mobile communication. The first one seeks to solve the beam tracking problem using motion sensor within the mobile device. A tracking algorithm is given and integrated into the tracking protocol. Detailed experiments and numerical simulations compared several compensation schemes with optical benchmark and demonstrated the efficiency of overhead reduction. The second strategy attempts to mitigate intermittent connections during roaming is multi-connectivity. Taking advantage of properties of rateless erasure code, a fountain code type multi-connectivity mechanism is proposed to increase the link reliability with simplified backhaul mechanism. The simulation demonstrates the efficiency and robustness of our system design with a multi-link channel record.The second topic in this thesis explores various techniques in blockage mitigation. A fast hear-beat like channel with heavy blockage loss is identified in the mmWave Unmanned Aerial Vehicle (UAV) communication experiment due to the propeller blockage. These blockage patterns are detected through Holm\u27s procedure as a problem of multi-time series edge detection. To reduce the blockage effect, an adaptive modulation and coding scheme is designed. The simulation results show that it could greatly improve the throughput given appropriately predicted patterns. The last but not the least, the blockage of directional communication also appears as a blessing because the geometrical information and blockage event of ancillary signal paths can be utilized to predict the blockage timing for the current transmission path. A geometrical model and prediction algorithm are derived to resolve the blockage time and initiate active handovers. An experiment provides solid proof of multi-paths properties and the numeral simulation demonstrates the efficiency of the proposed algorithm

Performance and Security Enhancements in Practical Millimeter-Wave Communication Systems

Millimeter-wave (mm-wave) communication systems achieve extremely high data rates and provide interference-free transmissions. to overcome high attenuations, they employ directional antennas that focus their energy in the intended direction. Transmissions can be steered such that signals only propagate within a specific area-of-interest. Although these advantages are well-known, they are not yet available in practical networks. IEEE 802.11ad, the recent standard for communications in the unlicensed 60 GHz band, exploits a subset of the directional propagation effects only. Despite the large available spectrum, it does not outperform other developments in the prevalent sub-6 GHz bands. This underutilization of directional communications causes unnecessary performance limitations and leaves a false sense of security. For example, standard compliant beam training is very time consuming. It uses suboptimal beam patterns, and is unprotected against malicious behaviors. Furthermore, no suitable research platform exists to validate protocols in realistic environments. To address these challenges, we develop a holistic evaluation framework and enhance the performance and security in practical mm-wave communication systems. Besides signal propagation analyses and environment simulations, our framework enables practical testbed experiments with off-the-shelf devices. We provide full access to a tri-band router’s operating system, modify the beam training operation in the Wi-Fi firmware, and create arbitrary beam patterns with the integrated antenna array. This novel approach allows us to implement custom algorithms such as a compressive sector selection that reduces the beam training overhead by a factor of 2.3. By aligning the receive beam, our adaptive beam switching algorithm mitigates interference from lateral directions and achieves throughput gains of up to 60%. With adaptive beam optimization, we estimate the current channel conditions and generate directional beams that implicitly exploit potential reflections in the environment. These beams increase the received signal strength by about 4.4 dB. While intercepting a directional link is assumed to be challenging, our experimental studies show that reflections on small-scale objects are sufficient to enable eavesdropping from afar. Additionally, we practically demonstrate that injecting forged feedback in the beam training enables Man-in-the Middle attacks. With only 7.3% overhead, our authentication scheme protects against this beam stealing and enforces responses to be only accepted from legitimate devices. By making beam training more efficient, effective, and reliable, our contributions finally enable practical applications of highly directional transmissions

Direct communication radio Iinterface for new radio multicasting and cooperative positioning

Cotutela: Universidad de defensa UNIVERSITA’ MEDITERRANEA DI REGGIO CALABRIARecently, the popularity of Millimeter Wave (mmWave) wireless networks has increased due to their capability to cope with the escalation of mobile data demands caused by the unprecedented proliferation of smart devices in the fifth-generation (5G). Extremely high frequency or mmWave band is a fundamental pillar in the provision of the expected gigabit data rates. Hence, according to both academic and industrial communities, mmWave technology, e.g., 5G New Radio (NR) and WiGig (60 GHz), is considered as one of the main components of 5G and beyond networks. Particularly, the 3rd Generation Partnership Project (3GPP) provides for the use of licensed mmWave sub-bands for the 5G mmWave cellular networks, whereas IEEE actively explores the unlicensed band at 60 GHz for the next-generation wireless local area networks. In this regard, mmWave has been envisaged as a new technology layout for real-time heavy-traffic and wearable applications. This very work is devoted to solving the problem of mmWave band communication system while enhancing its advantages through utilizing the direct communication radio interface for NR multicasting, cooperative positioning, and mission-critical applications. The main contributions presented in this work include: (i) a set of mathematical frameworks and simulation tools to characterize multicast traffic delivery in mmWave directional systems; (ii) sidelink relaying concept exploitation to deal with the channel condition deterioration of dynamic multicast systems and to ensure mission-critical and ultra-reliable low-latency communications; (iii) cooperative positioning techniques analysis for enhancing cellular positioning accuracy for 5G+ emerging applications that require not only improved communication characteristics but also precise localization. Our study indicates the need for additional mechanisms/research that can be utilized: (i) to further improve multicasting performance in 5G/6G systems; (ii) to investigate sideline aspects, including, but not limited to, standardization perspective and the next relay selection strategies; and (iii) to design cooperative positioning systems based on Device-to-Device (D2D) technology

Analysis and performance improvement of consumer-grade millimeter wave wireless networks

Millimeter-wave (mmWave) networks are one of the main key components in next cellular and WLANs (Wireless Local Area Networks). mmWave networks are capable of providing multi gigabit-per-second rates with very directional low-interference and high spatial reuse links. In 2013, the first 60 GHz wireless solution for WLAN appeared in the market. These were wireless docking stations under theWiGig protocol. Today, in 2019, 60 GHz communications have gained importance with the IEEE 802.11ad amendment with different products on the market, including routers, laptops and wireless Ethernet solutions. More importantly, mmWave networks are going to be used in next generation cellular networks, where smartphones will be using the 28 GHz band. For backbone links, 60 GHz communications have been proposed due to its higher directionality and unlicensed use. This thesis fits in this frame of constant development of themmWave bands to meet the needs of latency and throughput that will be necessary to support future communications. In this thesis, we first characterize the cost-effective design of COTS (commercial off-the-shelf) 60 GHz devices and later we improve their two main weaknesses, which are their low link distance and their non-ideal spatial reuse. It is critical to take into consideration the cost-effective design of COTS devices when designing networking mechanisms. This is why in this thesis we do the first-of-its-kind COTS analysis of 60 GHz devices, studying the D5000 WiGig Docking station and the TP-Link Talon IEEE 802.11ad router. We include static measurements such as the synthesized beam patterns of these devices or an analysis of the area-wide coverage that these devices can fulfill. We perform a spatial reuse analysis and study the performance of these devices under user mobility, showing how robust the link can be under user movement. We also study the feasibility of having flying mmWave links. We mount a 60 GHz COTS device into a drone and perform different measurement campaigns. In this first analysis, we see that these 60 GHz devices have a large performance gap for the achieved communication range as well as a very low spatial reuse. However, they are still suitable for low density WLANs and for next generation aerial micro cell stations. Seeing that these COTS devices are not as directional as literature suggests, we analyze how channels are not as frequency stable as expected due to the large amount of reflected signals. Ideally, frequency selective techniques could be used in these frequency selective channels in order to enlarge the range of these 60 GHz devices. To validate this, we measure real-world 60 GHz indoor channels with a bandwidth of 2 GHz and study their behavior with respect to techniques such as bitloading, subcarrier switch-off, and waterfilling. To this end, we consider a Orthogonal Frequency-Division Multiplexing (OFDM) channel as defined in the IEEE 802.11ad standard and show that in point of fact, these techniques are highly beneficial in mmWave networks allowing for a range extension of up to 50%, equivalent to power savings of up to 7 dB. In order to increase the very limited spatial reuse of these wireless networks, we propose a centralized system that allows the network to carry out the beam training process not only to maximize power but also taking into account other stations in order to minimize interference. This system is designed to work with unmodified clients. We implement and validate our system on commercial off-the-shelf IEEE 802.11ad hardware, achieving an average throughput gain of 24.67% for TCP traffic, and up to a twofold throughput gain in specific cases.Programa de Doctorado en Multimedia y Comunicaciones por la Universidad Carlos III de Madrid y la Universidad Rey Juan CarlosPresidente: Andrés García Saavedra.- Secretario: Matilde Pilar Sánchez Fernández.- Vocal: Ljiljana Simi

High speed 802.11ad wireless video streaming

The aim of this thesis is to investigate, both theoretically and experimentally, the capability of the IEEE 802.11ad device, the Wireless Gigabit Alliance known as WiGig operating in the 60 GHz band to handle rise in data traffic ubiquitous to high speed data transmission such as bulk data transfer, and wireless video streaming. According to Cisco and others, it is estimated that in 2020, internet video traffic will account for 82 % of all consumer internet traffic. This research evalu- ated the feasibility of the 60 GHz to provide minimum data rate of about 970 Mbps from the Ethernet link limited or clamped to 1 Gbps. This translated to 97 % effi- ciency with respect to the IEEE 802.11ad system performance. For the first time, the author proposed the enhancement of millimetre wave propagation through the use of specular reflection in non-line-of-sight environment, providing at least 94 % bandwidth utilization. Additional investigations result of the IEEE 802.11ad device in real live streaming of 4k ultra-high definition (UHD) video shows the feasibility of aggressive frequency reuse in the absence of co-channel interference. Moreover, using heuristic approach, this work compared materials absorption and signal reception at 60 GHz and the results gives better performance in contrast to the theoretical values. Finally, this thesis proposes a framework for the 802.11ad wireless H.264 video streaming over 60 GHz band. The work describes the potential and efficiency of WiGig device in streaming high definition (HD) video with high temporal index (TI) and 4k UHD video with no retransmission. Caching point established at the re-transmitter increase coverage and cache multimedia data. The results in this thesis shows the growing potential of millimeter wave technology, the WiGig for very high speed bulk data transfer, and live streaming video transmission

5G-PPP Technology Board:Delivery of 5G Services Indoors - the wireless wire challenge and solutions

The 5G Public Private Partnership (5G PPP) has focused its research and innovation activities mainly on outdoor use cases and supporting the user and its applications while on the move. However, many use cases inherently apply in indoor environments whereas their requirements are not always properly reflected by the requirements eminent for outdoor applications. The best example for indoor applications can be found is the Industry 4.0 vertical, in which most described use cases are occurring in a manufacturing hall. Other environments exhibit similar characteristics such as commercial spaces in offices, shopping malls and commercial buildings. We can find further similar environments in the media & entertainment sector, culture sector with museums and the transportation sector with metro tunnels. Finally in the residential space we can observe a strong trend for wireless connectivity of appliances and devices in the home. Some of these spaces are exhibiting very high requirements among others in terms of device density, high-accuracy localisation, reliability, latency, time sensitivity, coverage and service continuity. The delivery of 5G services to these spaces has to consider the specificities of the indoor environments, in which the radio propagation characteristics are different and in the case of deep indoor scenarios, external radio signals cannot penetrate building construction materials. Furthermore, these spaces are usually “polluted” by existing wireless technologies, causing a multitude of interreference issues with 5G radio technologies. Nevertheless, there exist cases in which the co-existence of 5G new radio and other radio technologies may be sensible, such as for offloading local traffic. In any case the deployment of networks indoors is advised to consider and be planned along existing infrastructure, like powerlines and available shafts for other utilities. Finally indoor environments expose administrative cross-domain issues, and in some cases so called non-public networks, foreseen by 3GPP, could be an attractive deployment model for the owner/tenant of a private space and for the mobile network operators serving the area. Technology-wise there exist a number of solutions for indoor RAN deployment, ranging from small cell architectures, optical wireless/visual light communication, and THz communication utilising reconfigurable intelligent surfaces. For service delivery the concept of multi-access edge computing is well tailored to host virtual network functions needed in the indoor environment, including but not limited to functions supporting localisation, security, load balancing, video optimisation and multi-source streaming. Measurements of key performance indicators in indoor environments indicate that with proper planning and consideration of the environment characteristics, available solutions can deliver on the expectations. Measurements have been conducted regarding throughput and reliability in the mmWave and optical wireless communication cases, electric and magnetic field measurements, round trip latency measurements, as well as high-accuracy positioning in laboratory environment. Overall, the results so far are encouraging and indicate that 5G and beyond networks must advance further in order to meet the demands of future emerging intelligent automation systems in the next 10 years. Highly advanced industrial environments present challenges for 5G specifications, spanning congestion, interference, security and safety concerns, high power consumption, restricted propagation and poor location accuracy within the radio and core backbone communication networks for the massive IoT use cases, especially inside buildings. 6G and beyond 5G deployments for industrial networks will be increasingly denser, heterogeneous and dynamic, posing stricter performance requirements on the network. The large volume of data generated by future connected devices will put a strain on networks. It is therefore fundamental to discriminate the value of information to maximize the utility for the end users with limited network resources

Improving Location Accuracy And Network Capacity In Mobile Networks

Todays mobile computing must support a wide variety of applications such as location-based services, navigation, HD media streaming and augmented reality. Providing such services requires large network bandwidth and precise localization mechanisms, which face significant challenges. First, new (real-time) localization mechanisms are needed to locate neighboring devices/objects with high accuracy under tight environment constraints, e.g. without infrastructure support. Second, mobile networks need to deliver orders of magnitude more bandwidth to support the exponentially increasing traffic demand, and adapt resource usage to user mobility.In this dissertation, we build effective and practical solutions to address these challenges. Our first research area is to develop new localization mechanisms that utilize the rich set of sensors on smartphones to implement accurate localization systems. We propose two designs. The first system tracks distance to nearby devices with centimeter accuracy by transmitting acoustic signals between the devices. We design robust and efficient signal processing algorithms that measure distances accurately on the fly, thus enabling real-time user motion tracking. Our second system locates a transmitting device in real-time using commodity smart- phones. Driving by the insight that rotating a wireless receiver (smartphone) around a users body can effectively emulate the sensitivity and functionality of a directional antenna, we design a rotation-based measurement algorithm that can accurately predict the direction of the target transmitter and locate the transmitter with a few measurements.Our second research area is to develop next generation mobile networks to significantly boost network capacity. We propose a drastically new outdoor picocell design that leverages millimeter wave 60GHz transmissions to provide multi-Gbps bandwidth for mobile users. Using extensive measurements on off-the-shelf 60GHz radios, we explore the feasibility of 60GHz picocells by characterizing range, attenuation due to reflections, sensitivity to movement and blockage, and interference in typical urban environments. Our results dispel some common myths on 60GHz, and show that 60GHz outdoor picocells are indeed a feasible approach for delivering orders of magnitude increase in network capacity.Finally, we seek to capture and understand user mobility patterns which are essential in mobile network design and deployment. While traditional methods of collecting human mobility traces are expensive and not scalable, we explore a new direction that extracts large-scale mobility traces through widely available geosocial datasets, e.g. Foursquare "check-in" datasets. By comparing raw GPS traces against Foursquare checkins, we analyze the value of using geosocial datasets as representative traces of human mobility. We then develop techniques to both "sanitize" and "repopulate" geosocial traces, thus producing detailed mobility traces more indicative of actual human movement and suitable for mobile network design

Seamless coverage for the next generation wireless communication networks

Data demand has exponentially increased due to the rapid growth of wireless and mobile devices traffic in recent years. With the advent of the fifth generation, 5G, and beyond networks, users will be able to take advantage of additional services beyond the capability of current wireless networks while maintaining a highquality experience. The exploitation of millimeter-wave (mm-wave) frequency in 5G promises to meet the demands of future networks with the motto of providing high data rate coverage with low latency to its users, which will allow future networks to function more efficiently. However, while planning a network using mm-wave frequencies, it is important to consider their small coverage footprints and weak penetration resistance. Heterogeneous network planning with the dense deployment of the small cells is one way of overcoming these issues, yet, without proper planning of the integrated network within the same or different frequencies could lead to other problems such as coverage gaps and frequent handovers; due to the natural physics of mm-wave frequencies. Therefore this thesis focuses on bringing ultra-reliable low-latency communication for mm-wave indoor users by increasing the indoor coverage and reducing the frequency of handovers. Towards achieving this thesis’s aim, a detailed literature review of mm-wave coverage is provided in Chapter 2. Moreover, a table that highlights the penetration loss of materials at various frequencies is provided as a result of thorough research in this field, which will be helpful to the researchers investigating this subject. According to our knowledge, this is the first table presenting the most studies that have been conducted in this field. Chapter 3 examines the interference effect of the outdoor base station (BS) inside the building in the context of a heterogeneous network environment. A single building model scenario is created, and the interference analysis is performed to observe the effects of different building materials used as walls. The results reveal the importance of choosing the material type when outdoor BS is close to the building. Moreover, the interference effect of outdoor BS should be minimized when the frequency re-use technique is deployed over very short distances. Chapter 4 presents two-fold contributions, in addition to providing a comprehensive handover study of mm-wave technology. The first study starts with addressing the problem of modelling users’ movement in the indoor environment. Therefore, a user-based indoor mobility prediction via Markov chain with an initial transition matrix is proposed, acquired from Q-learning algorithms. Based on the acquired knowledge of the user’s mobility in the indoor environment, the second contribution of this chapter provides a pre-emptive handover algorithm to provide seamless connection while the user moves within the heterogeneous network. The implementation and evaluation of the proposed algorithm show a reduction in the handover signalling costs by more than 50%, outperforming conventional handover algorithms. Lastly, Chapter 5 contributes to providing robust signal coverage for coverage blind areas and implementing and evaluating the proposed handover algorithm with the intelligent reflective surface. The results show a reduction in the handover signalling costs by more than 33%, outperforming conventional handover algorithms with the pre-emptive handover initiation