Combined Learned and Classical Methods for Real-Time Visual Perception in Autonomous Driving

Autonomy, robotics, and Artificial Intelligence (AI) are among the main defining themes of next-generation societies. Of the most important applications of said technologies is driving automation which spans from different Advanced Driver Assistance Systems (ADAS) to full self-driving vehicles. Driving automation is promising to reduce accidents, increase safety, and increase access to mobility for more people such as the elderly and the handicapped. However, one of the main challenges facing autonomous vehicles is robust perception which can enable safe interaction and decision making. With so many sensors to perceive the environment, each with its own capabilities and limitations, vision is by far one of the main sensing modalities. Cameras are cheap and can provide rich information of the observed scene. Therefore, this dissertation develops a set of visual perception algorithms with a focus on autonomous driving as the target application area. This dissertation starts by addressing the problem of real-time motion estimation of an agent using only the visual input from a camera attached to it, a problem known as visual odometry. The visual odometry algorithm can achieve low drift rates over long-traveled distances. This is made possible through the innovative local mapping approach used. This visual odometry algorithm was then combined with my multi-object detection and tracking system. The tracking system operates in a tracking-by-detection paradigm where an object detector based on convolution neural networks (CNNs) is used. Therefore, the combined system can detect and track other traffic participants both in image domain and in 3D world frame while simultaneously estimating vehicle motion. This is a necessary requirement for obstacle avoidance and safe navigation. Finally, the operational range of traditional monocular cameras was expanded with the capability to infer depth and thus replace stereo and RGB-D cameras. This is accomplished through a single-stream convolution neural network which can output both depth prediction and semantic segmentation. Semantic segmentation is the process of classifying each pixel in an image and is an important step toward scene understanding. Literature survey, algorithms descriptions, and comprehensive evaluations on real-world datasets are presented.Ph.D.College of Engineering & Computer ScienceUniversity of Michiganhttps://deepblue.lib.umich.edu/bitstream/2027.42/153989/1/Mohamed Aladem Final Dissertation.pdfDescription of Mohamed Aladem Final Dissertation.pdf : Dissertatio

Online Structured Learning for Real-Time Computer Vision Gaming Applications

In recent years computer vision has played an increasingly important role in the development of computer games, and it now features as one of the core technologies for many gaming platforms. The work in this thesis addresses three problems in real-time computer vision, all of which are motivated by their potential application to computer games. We rst present an approach for real-time 2D tracking of arbitrary objects. In common with recent research in this area we incorporate online learning to provide an appearance model which is able to adapt to the target object and its surrounding background during tracking. However, our approach moves beyond the standard framework of tracking using binary classication and instead integrates tracking and learning in a more principled way through the use of structured learning. As well as providing a more powerful framework for adaptive visual object tracking, our approach also outperforms state-of-the-art tracking algorithms on standard datasets. Next we consider the task of keypoint-based object tracking. We take the traditional pipeline of matching keypoints followed by geometric verication and show how this can be embedded into a structured learning framework in order to provide principled adaptivity to a given environment. We also propose an approximation method allowing us to take advantage of recently developed binary image descriptors, meaning our approach is suitable for real-time application even on low-powered portable devices. Experimentally, we clearly see the benet that online adaptation using structured learning can bring to this problem. Finally, we present an approach for approximately recovering the dense 3D structure of a scene which has been mapped by a simultaneous localisation and mapping system. Our approach is guided by the constraints of the low-powered portable hardware we are targeting, and we develop a system which coarsely models the scene using a small number of planes. To achieve this, we frame the task as a structured prediction problem and introduce online learning into our approach to provide adaptivity to a given scene. This allows us to use relatively simple multi-view information coupled with online learning of appearance to efficiently produce coarse reconstructions of a scene

Optimization for Deep Learning Systems Applied to Computer Vision

149 p.Since the DL revolution and especially over the last years (2010-2022), DNNs have become an essentialpart of the CV field, and they are present in all its sub-fields (video-surveillance, industrialmanufacturing, autonomous driving, ...) and in almost every new state-of-the-art application that isdeveloped. However, DNNs are very complex and the architecture needs to be carefully selected andadapted in order to maximize its efficiency. In many cases, networks are not specifically designed for theconsidered use case, they are simply recycled from other applications and slightly adapted, without takinginto account the particularities of the use case or the interaction with the rest of the system components,which usually results in a performance drop.This research work aims at providing knowledge and tools for the optimization of systems based on DeepLearning applied to different real use cases within the field of Computer Vision, in order to maximizetheir effectiveness and efficiency

Map-Based Localization for Unmanned Aerial Vehicle Navigation

Unmanned Aerial Vehicles (UAVs) require precise pose estimation when navigating in indoor and GNSS-denied / GNSS-degraded outdoor environments. The possibility of crashing in these environments is high, as spaces are confined, with many moving obstacles. There are many solutions for localization in GNSS-denied environments, and many different technologies are used. Common solutions involve setting up or using existing infrastructure, such as beacons, Wi-Fi, or surveyed targets. These solutions were avoided because the cost should be proportional to the number of users, not the coverage area. Heavy and expensive sensors, for example a high-end IMU, were also avoided. Given these requirements, a camera-based localization solution was selected for the sensor pose estimation. Several camera-based localization approaches were investigated. Map-based localization methods were shown to be the most efficient because they close loops using a pre-existing map, thus the amount of data and the amount of time spent collecting data are reduced as there is no need to re-observe the same areas multiple times. This dissertation proposes a solution to address the task of fully localizing a monocular camera onboard a UAV with respect to a known environment (i.e., it is assumed that a 3D model of the environment is available) for the purpose of navigation for UAVs in structured environments. Incremental map-based localization involves tracking a map through an image sequence. When the map is a 3D model, this task is referred to as model-based tracking. A by-product of the tracker is the relative 3D pose (position and orientation) between the camera and the object being tracked. State-of-the-art solutions advocate that tracking geometry is more robust than tracking image texture because edges are more invariant to changes in object appearance and lighting. However, model-based trackers have been limited to tracking small simple objects in small environments. An assessment was performed in tracking larger, more complex building models, in larger environments. A state-of-the art model-based tracker called ViSP (Visual Servoing Platform) was applied in tracking outdoor and indoor buildings using a UAVs low-cost camera. The assessment revealed weaknesses at large scales. Specifically, ViSP failed when tracking was lost, and needed to be manually re-initialized. Failure occurred when there was a lack of model features in the cameras field of view, and because of rapid camera motion. Experiments revealed that ViSP achieved positional accuracies similar to single point positioning solutions obtained from single-frequency (L1) GPS observations standard deviations around 10 metres. These errors were considered to be large, considering the geometric accuracy of the 3D model used in the experiments was 10 to 40 cm. The first contribution of this dissertation proposes to increase the performance of the localization system by combining ViSP with map-building incremental localization, also referred to as simultaneous localization and mapping (SLAM). Experimental results in both indoor and outdoor environments show sub-metre positional accuracies were achieved, while reducing the number of tracking losses throughout the image sequence. It is shown that by integrating model-based tracking with SLAM, not only does SLAM improve model tracking performance, but the model-based tracker alleviates the computational expense of SLAMs loop closing procedure to improve runtime performance. Experiments also revealed that ViSP was unable to handle occlusions when a complete 3D building model was used, resulting in large errors in its pose estimates. The second contribution of this dissertation is a novel map-based incremental localization algorithm that improves tracking performance, and increases pose estimation accuracies from ViSP. The novelty of this algorithm is the implementation of an efficient matching process that identifies corresponding linear features from the UAVs RGB image data and a large, complex, and untextured 3D model. The proposed model-based tracker improved positional accuracies from 10 m (obtained with ViSP) to 46 cm in outdoor environments, and improved from an unattainable result using VISP to 2 cm positional accuracies in large indoor environments. The main disadvantage of any incremental algorithm is that it requires the camera pose of the first frame. Initialization is often a manual process. The third contribution of this dissertation is a map-based absolute localization algorithm that automatically estimates the camera pose when no prior pose information is available. The method benefits from vertical line matching to accomplish a registration procedure of the reference model views with a set of initial input images via geometric hashing. Results demonstrate that sub-metre positional accuracies were achieved and a proposed enhancement of conventional geometric hashing produced more correct matches - 75% of the correct matches were identified, compared to 11%. Further the number of incorrect matches was reduced by 80%

Leveraging Eye Structure and Motion to Build a Low-Power Wearable Gaze Tracking System

Clinical studies have shown that features of a person\u27s eyes can function as an effective proxy for cognitive state and neurological function. Technological advances in recent decades have allowed us to deepen this understanding and discover that the actions of the eyes are in fact very tightly coupled to the operation of the brain. Researchers have used camera-based eye monitoring technology to exploit this connection and analyze mental state across across many different metrics of interest. These range from simple things like attention and scene processing, to impairments such as a fatigue or substance use, and even significant mental disorders such as Parkinson\u27s, autism, and schizophrenia. While there is a wealth of knowledge and social benefit to be gained from eye tracking, the field has historically been restricted to laboratory use by crippling technological limitations - most notably, device size and power consumption. These issues primarily stem from the use of high-resolution cameras and heavyweight video-processing algorithms, both of which induce extremely high performance overhead on the eye tracker. To address this problem, we have constructed a lightweight, ultra-low-power eye monitoring device in the form factor of a pair of eyeglasses. The key guiding design principle for its construction was saliency-aware resource minimization. Specifically, our design leverages the fact that close-up images of the eye are characterized by large salient features which provide a high degree of redundant information; we exploit this to heavily subsample the eye image and reduce resource utilization while performing effective eye tracking. In the first part of this thesis, we present an initial design of a wearable system to enable ubiquitous eye tracking. By exploiting the fact that the eye has several large, visually redundant features such as the iris and pupil, we were able to develop a neural-network-based adaptive-sampling algorithm for predicting the gaze point while sampling a minimal number of pixels from the image. This enabled us to realize a power savings using specialized imaging hardware that would sample only those most salient pixels, which proportionally reduced the power and time cost of reading images for eye tracking. With these optimizations we were able to build a first-of-of its kind wearable eye tracker that consumed 40 mW of power and demonstrated a gaze tracking error of only 3 degrees across multiple subjects. We refer to this device as the iShadow platform. The second contribution and section of this thesis is a significant improvement upon the original iShadow design for the purpose of improving both power utilization and eye tracking performance. We constructed a new pupil-tracking algorithm based on lightweight computer vision features, which leverages the smoothness of the eye\u27s motion to reduce even further the amount of camera sampling needed. To guard against very infrequent discontinuities resulting from blinks or reflections off the eye, we integrated this model with the previously-used one-shot neural network algorithm. Because the common case (smooth, uninterrupted eye motion) occurs 90% of the time, we were able to realize a dramatic increase in performance due to the efficiency of the smooth tracking algorithm. The new and improved system, labeled CIDER, enabled much more accurate eye tracking - 0.4 degree error - with power consumption as low as 7 mW. This design also enabled a tradeoff between power consumption and eye tracking rate, in which it was also possible to draw higher power of ~30 mW in order to do eye tracking at rates of up to 240 frames per second. The final contribution of this thesis is a re-designed version of the iShadow glasses hardware that is suitable for ``in-the-wild\u27\u27 studies on subjects in their daily living environment. A wearable device, especially one that is worn on the head, must be minimally obtrusive in order to be accepted and used in the field by subjects. This design goal conflicts with the ideal placement of cameras that is needed for achieving consistent eye tracking fidelity. We present multiple possible methods we explored for addressing these competing design challenges, and discuss the reasons that many proved infeasible. To conclude, we present a working design solution that appears to optimally trade off user comfort and convenience and against the technical requirements of the system