A Portable Luminometer with a Disposable Electrochemiluminescent Biosensor for Lactate Determination

A hand-held luminometer for measuring electrochemiluminescence (ECL) for lactate determination and based on one-shot biosensors fabricated using screen-printed electrodes is described. The lactate recognition system is based on lactate oxidase and the transduction system consists of electro-oxidation of luminol, with all the reagents immobilized in a Methocel membrane. The membrane composition and reaction conditions have been optimized to obtain adequate sensitivity. The luminometer is based on a large silicon photodiode as detector and includes a programmable potentiostat to initialize the chemical reaction and signal processing circuitry, designed to acquire a low level photocurrent with offset cancelation, low pass filtering for noise attenuation and adjustable gain up to 1012 V/A. The one-shot biosensor responds to lactate rapidly, with an acquisition time of 2.5 min, obtaining a linear dependence from 8 × 10−6 to 2 × 10−4 M, a detection limit of 2.4 × 10−6 M and a sensor-to-sensor reproducibility (relative standard deviation, RSD) of around 7–10 % at the medium level of the range

Development of Smartphone-based ECL Sensor for Dopamine Detection: Practical Approaches

In this work, a compact, mobile phone-based ECL sensor apparatus was developed using the phone cameras, screen-printed electrodes (SPE), and mobile app for dopamine detection. Methods of DC voltage application for ECL reaction were comprehensively studied from the mobile phone itself or external power. Under optimized sensing conditions, with disposable carbon SPE and 20 mM coreactant tri-n-propylamine (TPrA), acceptable repeatability and reproducibility were achieved in terms of relative standard deviation (RSD) of intra- and interassays, which were 6.7 and 5.5%, respectively. The biochemical compound dopamine was measured due to its ECL quenching characteristics and its clinical importance. The quenching mechanism of Ru(bpy)32+/TPrA by dopamine was investigated based on the estimation of the constants of the Stern-Volmer equations. The linear range for detectable dopamine concentration was from 1.0 to 50 μM (R2 = 0.982). As the developed mobile phone-based ECL sensor is simple, small and assembled from low-cost components, it offers new opportunities for the development of inexpensive analytical methods and compact sensors

State-of-the-Art of (Bio)Chemical Sensor Developments in Analytical Spanish Groups

(Bio)chemical sensors are one of the most exciting fields in analytical chemistry today. The development of these analytical devices simplifies and miniaturizes the whole analytical process. Although the initial expectation of the massive incorporation of sensors in routine analytical work has been truncated to some extent, in many other cases analytical methods based on sensor technology have solved important analytical problems. Many research groups are working in this field world-wide, reporting interesting results so far. Modestly, Spanish researchers have contributed to these recent developments. In this review, we summarize the more representative achievements carried out for these groups. They cover a wide variety of sensors, including optical, electrochemical, piezoelectric or electro-mechanical devices, used for laboratory or field analyses. The capabilities to be used in different applied areas are also critically discussed

Detection and inhibition of influenza using synthetic sialosidesc

Influenza infection remains constant threat to human health and results in huge financial loss every year. Rapid and accurate detection of influenza can help governments and health organizations monitor influenza activity and take measurements when necessary. In addition, influenza detection in a timingly manner can help doctors make diagnosis and provide effective treatment. On the other hand, novel inhibitors of influenza virus are in high demand because circulating strains have started to develop resistance to currently available anti-viral drugs. Influenza virus has two surface glycoproteins: hemagglutinin (HA) and neuraminidase (NA), which play important roles in the influenza infection. The binding of HA to sialic acid-containing carbohydrates on cell surface initiates virus internalization, while cleavage of terminal sialic acid by NA facilitates viral particle release. In this dissertation, we focus on the development of glycan microarray that is comprised of a panel of NA resistant sialosides, and demonstrate the application of microarray to capture influenza virus at ambient temperature without the addition of NA inhibitors. We also describe a novel electrochemical biosensor for the detection of influenza virus. In addition, we have developed a new class of bivalent NA inhibitors that show promising inhibitory activities against influenza viruses

Optimización, diseño y desarrollo hardware de un potenciostato para la adquisición de señales electroquímicas

Máster en Ingeniería de TelecomunicaciónEn este trabajo de fin de máster se ha estudiado y diseñado, para su posterior implementación, un potenciostato. Un potenciostato es un sistema electrónico que va a permitir controlar el proceso de medición de una celda electroquímica de tres electrodos para tomar medidas de los niveles de concentración de una determinada sustancia en un medio. Hoy en día este tipo de sensores tienen un alto valor en nuestra sociedad en el ámbito alimentario, farmacéutico o sanitario. Primero, se ha hecho un estudio y análisis de los principales diseños de potenciostatos que existen actualmente, viendo las ventajas y las desventajas de cada uno y analizando las características más cruciales con el fin de diferenciar las distintas partes en las que se puede dividir. Esta división se ha hecho con el objetivo de hacer más sencillo el diseño y poder ver el impacto de cada parte al conjunto. Una vez diseñado e implementado en una PCB se procedió a realizar la configuración SW de los componentes electrónicos. Mediante el bus de comunicaciones USB para programar el microcontrolador y mediante el protocolo I2C para la programación interna entre componentes (conversores, potenciómetro). Por último y antes de empezar a hacer pruebas para obtener medidas reales, se realizaron varios tests para depurar posibles errores, ya fuesen a nivel HW debidos a posibles cortocircuitos o errores en la configuración de los pines, o a nivel SW provocados por una mala configuración de los registros de los componentes electrónicos. Para ver el correcto funcionamiento del potenciostato diseñado se ha hecho una comparativa entre el potenciostato diseñado en este trabajo y un potenciostato comercial de la empresa Inbea

Biosensors for Diagnosis and Monitoring

Biosensor technologies have received a great amount of interest in recent decades, and this has especially been the case in recent years due to the health alert caused by the COVID-19 pandemic. The sensor platform market has grown in recent decades, and the COVID-19 outbreak has led to an increase in the demand for home diagnostics and point-of-care systems. With the evolution of biosensor technology towards portable platforms with a lower cost on-site analysis and a rapid selective and sensitive response, a larger market has opened up for this technology. The evolution of biosensor systems has the opportunity to change classic analysis towards real-time and in situ detection systems, with platforms such as point-of-care and wearables as well as implantable sensors to decentralize chemical and biological analysis, thus reducing industrial and medical costs. This book is dedicated to all the research related to biosensor technologies. Reviews, perspective articles, and research articles in different biosensing areas such as wearable sensors, point-of-care platforms, and pathogen detection for biomedical applications as well as environmental monitoring will introduce the reader to these relevant topics. This book is aimed at scientists and professionals working in the field of biosensors and also provides essential knowledge for students who want to enter the field

3D Printed Microfluidic Devices

3D printing has revolutionized the microfabrication prototyping workflow over the past few years. With the recent improvements in 3D printing technologies, highly complex microfluidic devices can be fabricated via single-step, rapid, and cost-effective protocols as a promising alternative to the time consuming, costly and sophisticated traditional cleanroom fabrication. Microfluidic devices have enabled a wide range of biochemical and clinical applications, such as cancer screening, micro-physiological system engineering, high-throughput drug testing, and point-of-care diagnostics. Using 3D printing fabrication technologies, alteration of the design features is significantly easier than traditional fabrication, enabling agile iterative design and facilitating rapid prototyping. This can make microfluidic technology more accessible to researchers in various fields and accelerates innovation in the field of microfluidics. Accordingly, this Special Issue seeks to showcase research papers, short communications, and review articles that focus on novel methodological developments in 3D printing and its use for various biochemical and biomedical applications

A Portable Luminometer with a Disposable Electrochemiluminescent Biosensor for Lactate Determination

A hand-held luminometer for measuring electrochemiluminescence (ECL) for lactate determination and based on one-shot biosensors fabricated using screen-printed electrodes is described. The lactate recognition system is based on lactate oxidase and the transduction system consists of electro-oxidation of luminol, with all the reagents immobilized in a Methocel membrane. The membrane composition and reaction conditions have been optimized to obtain adequate sensitivity. The luminometer is based on a large silicon photodiode as detector and includes a programmable potentiostat to initialize the chemical reaction and signal processing circuitry, designed to acquire a low level photocurrent with offset cancelation, low pass filtering for noise attenuation and adjustable gain up to 1012 V/A. The one-shot biosensor responds to lactate rapidly, with an acquisition time of 2.5 min, obtaining a linear dependence from 8 × 10−6 to 2 × 10−4 M, a detection limit of 2.4 × 10−6 M and a sensor-to-sensor reproducibility (relative standard deviation, RSD) of around 7–10 % at the medium level of the range