608 research outputs found
A Performance Analysis Framework for WiFi/WiMAX Heterogeneous Metropolitan Networks Based on Cross-Layer Design
The communication between network nodes within different protocol domains is often regarded simply as a black box with unknown configuration conditions in the path. We address network heterogeneity using a white box approach and focus on its interconnection processes. To achieve this purpose, a Performance Analysis Framework (PAF) is proposed which is composed of the formalization of the latter using process algebra (PA) and the corresponding teletraffic performance models. In this contribution, we target the IEEE 802.16 and IEEE 802.11 protocols. For the teletraffic models, we extend previous models for such scenario with the inclusion of the following protocol operational parameters (metrics): bit error rate (BER), packet error ratio (PER), and packet length (pl). From the framework teletraffic models, the optimal packet length (OPL), end to end throughput, delay, and packet loss are obtained. The PAF outperforms previous modeling solutions in terms of delay and throughput relative to NS3 simulation results. </jats:p
Recommended from our members
Integrated mobility and resource management for cross-network resource sharing in heterogeneous wireless networks using traffic offload policies
The problem of efficient use of resources in wireless access networks becomes critical today with users expecting continuous high-speed network access. While access network capacity continues to increase, simultaneous operation of multiple wireless access networks presents an opportunity to increase the data rates available to end-users even further using intelligent cross-network resource sharing. This paper introduces a new integrated mobility and resource management (IMRM) framework for automatic execution of policies for cross-network resource sharing using traffic offload and pre-emptive resource reservation algorithms. The presented framework enables both mobile-initiated and network-initiated resource sharing policies to be executed. This paper presents the framework in detail and analyses its performance using extensive ns-2 simulations of the operation of a set of static policies based on measured signal strength, and dynamic pre-emptive network-initiated policies in a WiFi/WiMAX scenario. The detailed evaluation of the static policies clearly shows that the quality of voice applications shows large deviation, mostly due to very different levels of delay in access networks. Based on these conclusions, this paper presents a design of two new dynamic policies and shows that such policies, when efficiently implemented using the new IMRM framework can greatly improve the capacity of the network to serve voice traffic with a minimal impact on the data traffic and with a very low signalling overhead
Recommended from our members
Application priority framework for fixed mobile converged communication networks
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases
Media independent handovers : network selection for mobile IP nodes in heterogeneous wireless networks
Includes abstract.Includes bibliographical references (p. 79-82).In Next Generation Networks (NGN), also known as 4G, Beyond 3G, Converged, Integrated and Interworked Network, user node mobility in wireless and wired environments will seamlessly cross disparate network boundaries. The effort to offer ubiquitous computing, providing access to services anywhere and anytime, strongly encourages the ability to roam across the different existing and future networks. Literature shows investigation of concepts such as Always Best Connected (ABC) when heterogeneous networks co-exist , which will work or compete with other schemes like Home Network Default (HND), Compatibility and Network Operator Agreements (CNOA) to guide network selection or access . With the variety of available networks, the mobile node may be faced with having to decide which network to connect to. We concentrate on the network selection aspects of these envisaged mobile, overlay and integrated environment in heterogeneous networks. The standard developments by the IEEE802.21 Working group and the IETF Networking group form the base of our approach that seeks to see mobility across heterogeneous networks a reality. We propose an IEEE802.21 Media Independent Handover Function (MIHF) based network discovery and network selection, leading to a handover. The selection may be further assisted by an MIHF capable Broker Node that is Third party to the Network Providers to provide a central yet distributed database of the available networks as encountered by the Mobile Node, to cater for Nodes with no prior knowledge of networks and software repository. A Mobile Node (MN) in our solution uses 802.21 communication messages to obtain information about foreign networks encountered before selecting the networks to connect to. Our evaluation through simulations, shows that network selection in heterogeneous wireless networks environment for the appropriately equipped devices is greatly enhanced by the use of the Media Independent Handover Protocol. In scenarios where the mobile node has no prior knowledge of the encountered different network architectures, the use of a Broker node can, for an optimal number of available networks also greatly enhance the mobile node’s network selection by reducing the delay associated and the packet losses incurred
Recommended from our members
Multimedia delivery in the future internet
The term “Networked Media” implies that all kinds of media including text, image, 3D graphics, audio
and video are produced, distributed, shared, managed and consumed on-line through various networks,
like the Internet, Fiber, WiFi, WiMAX, GPRS, 3G and so on, in a convergent manner [1]. This white
paper is the contribution of the Media Delivery Platform (MDP) cluster and aims to cover the Networked
challenges of the Networked Media in the transition to the Future of the Internet.
Internet has evolved and changed the way we work and live. End users of the Internet have been confronted
with a bewildering range of media, services and applications and of technological innovations concerning
media formats, wireless networks, terminal types and capabilities. And there is little evidence that the pace
of this innovation is slowing. Today, over one billion of users access the Internet on regular basis, more
than 100 million users have downloaded at least one (multi)media file and over 47 millions of them do so
regularly, searching in more than 160 Exabytes1 of content. In the near future these numbers are expected
to exponentially rise. It is expected that the Internet content will be increased by at least a factor of 6, rising
to more than 990 Exabytes before 2012, fuelled mainly by the users themselves. Moreover, it is envisaged
that in a near- to mid-term future, the Internet will provide the means to share and distribute (new)
multimedia content and services with superior quality and striking flexibility, in a trusted and personalized
way, improving citizens’ quality of life, working conditions, edutainment and safety.
In this evolving environment, new transport protocols, new multimedia encoding schemes, cross-layer inthe
network adaptation, machine-to-machine communication (including RFIDs), rich 3D content as well as
community networks and the use of peer-to-peer (P2P) overlays are expected to generate new models of
interaction and cooperation, and be able to support enhanced perceived quality-of-experience (PQoE) and
innovative applications “on the move”, like virtual collaboration environments, personalised services/
media, virtual sport groups, on-line gaming, edutainment. In this context, the interaction with content
combined with interactive/multimedia search capabilities across distributed repositories, opportunistic P2P
networks and the dynamic adaptation to the characteristics of diverse mobile terminals are expected to
contribute towards such a vision.
Based on work that has taken place in a number of EC co-funded projects, in Framework Program 6 (FP6)
and Framework Program 7 (FP7), a group of experts and technology visionaries have voluntarily
contributed in this white paper aiming to describe the status, the state-of-the art, the challenges and the way
ahead in the area of Content Aware media delivery platforms
Recommended from our members
Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues.
The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies).
The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks.
Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications.
The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way.
The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools.
This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks.
Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research.
It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites.
The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation
Future Trends and Challenges for Mobile and Convergent Networks
Some traffic characteristics like real-time, location-based, and
community-inspired, as well as the exponential increase on the data traffic in
mobile networks, are challenging the academia and standardization communities
to manage these networks in completely novel and intelligent ways, otherwise,
current network infrastructures can not offer a connection service with an
acceptable quality for both emergent traffic demand and application requisites.
In this way, a very relevant research problem that needs to be addressed is how
a heterogeneous wireless access infrastructure should be controlled to offer a
network access with a proper level of quality for diverse flows ending at
multi-mode devices in mobile scenarios. The current chapter reviews recent
research and standardization work developed under the most used wireless access
technologies and mobile access proposals. It comprehensively outlines the
impact on the deployment of those technologies in future networking
environments, not only on the network performance but also in how the most
important requirements of several relevant players, such as, content providers,
network operators, and users/terminals can be addressed. Finally, the chapter
concludes referring the most notable aspects in how the environment of future
networks are expected to evolve like technology convergence, service
convergence, terminal convergence, market convergence, environmental awareness,
energy-efficiency, self-organized and intelligent infrastructure, as well as
the most important functional requisites to be addressed through that
infrastructure such as flow mobility, data offloading, load balancing and
vertical multihoming.Comment: In book 4G & Beyond: The Convergence of Networks, Devices and
Services, Nova Science Publishers, 201
Motorized cart
Motorized cart is known as an effective tool and timeless that help people carry heavy loads. For farmers, it has an especially vital tool for moving goods. Oil palm farmers typically uses the wheelbarrow to move the oil palm fruit (Figure 10.1). However, there is a lack of equipment that should be further enhanced in capabilities. Motorized carts that seek to add automation to wheelbarrow as it is to help people save manpower while using it. At present, oil palm plantation industry is among the largest in Malaysia. However, in an effort to increase the prestige of the industry to a higher level there are challenges to be faced. Shortage of workers willing to work the farm for harvesting oil palm has given pain to manage oil palm plantations. Many have complained about the difficulty of hiring foreign workers and a high cost. Although there are tools that can be used to collect or transfer the proceeds of oil palm fruits such as carts available. However, these tools still have the disadvantage that requires high manpower to operate. Moreover, it is not suitable for all land surfaces and limited cargo space. Workload and manpower dependence has an impact on farmers' income
Resource slicing in virtual wireless networks: a survey
New architectural and design approaches for radio access networks have appeared with the introduction of network virtualization in the wireless domain. One of these approaches splits the wireless network infrastructure into isolated virtual slices under their own management, requirements, and characteristics. Despite the advances in wireless virtualization, there are still many open issues regarding the resource allocation and isolation of wireless slices. Because of the dynamics and
shared nature of the wireless medium, guaranteeing that the traffic on one slice will not affect the traffic on the others has proven to be difficult. In this paper, we focus on the detailed definition of the problem, discussing its challenges. We also provide a review of existing works that deal with the problem, analyzing how new trends such as software defined networking and network function virtualization can assist in the slicing. We will finally describe some research challenges on this topic.Peer ReviewedPostprint (author's final draft
- …