Techniques for Reducing Redundant Unicast Traffic in HSR Networks

High-availability seamless redundancy (HSR) is a seamless redundancy protocol for Ethernet networks. HSR provides seamless communication with fault tolerance based on the duplication of every unicast frame sent in a ring topology. HSR is very useful for mission- and time-critical systems such as substation automation systems (SASs). However, the main drawback of HSR is to generate excessively redundant network traffic in HSR networks. This drawback would unnecessarily waste network bandwidth and hence could degrade network performance in HSR networks. Several traffic reduction techniques for HSR networks have been proposed to improve the network performance in the networks. These techniques can be classified into two main groups: traffic filtering-based and dual paths-based techniques. In this chapter, we provide a description and comparison of these HSR traffic reduction techniques. This chapter describes these traffic reduction techniques and compares their network performance. The operations, advantages, and disadvantages of these techniques are investigated and summarized

An autonomic delivery framework for HTTP adaptive streaming in multicast-enabled multimedia access networks

The consumption of multimedia services over HTTP-based delivery mechanisms has recently gained popularity due to their increased flexibility and reliability. Traditional broadcast TV channels are now offered over the Internet, in order to support Live TV for a broad range of consumer devices. Moreover, service providers can greatly benefit from offering external live content (e. g., YouTube, Hulu) in a managed way. Recently, HTTP Adaptive Streaming (HAS) techniques have been proposed in which video clients dynamically adapt their requested video quality level based on the current network and device state. Unlike linear TV, traditional HTTP- and HAS-based video streaming services depend on unicast sessions, leading to a network traffic load proportional to the number of multimedia consumers. In this paper we propose a novel HAS-based video delivery architecture, which features intelligent multicasting and caching in order to decrease the required bandwidth considerably in a Live TV scenario. Furthermore we discuss the autonomic selection of multicasted content to support Video on Demand (VoD) sessions. Experiments were conducted on a large scale and realistic emulation environment and compared with a traditional HAS-based media delivery setup using only unicast connections

Automation, Protection and Control of Substation Based on IEC 61850

Reliability of power system protection system has been a key issue in the substation operation due to the use of multi-vendor equipment of proprietary features, environmental issues, and complex fault diagnosis. Failure to address these issues could have a significant effect on the performance of the entire electricity grid. With the introduction of IEC 61850 standard, substation automation system (SAS) has significantly altered the scenario in utilities and industries as indicated in this thesis

A study of the applicability of software-defined networking in industrial networks

173 p.Las redes industriales interconectan sensores y actuadores para llevar a cabo funciones de monitorización, control y protección en diferentes entornos, tales como sistemas de transporte o sistemas de automatización industrial. Estos sistemas ciberfísicos generalmente están soportados por múltiples redes de datos, ya sean cableadas o inalámbricas, a las cuales demandan nuevas prestaciones, de forma que el control y gestión de tales redes deben estar acoplados a las condiciones del propio sistema industrial. De este modo, aparecen requisitos relacionados con la flexibilidad, mantenibilidad y adaptabilidad, al mismo tiempo que las restricciones de calidad de servicio no se vean afectadas. Sin embargo, las estrategias de control de red tradicionales generalmente no se adaptan eficientemente a entornos cada vez más dinámicos y heterogéneos.Tras definir un conjunto de requerimientos de red y analizar las limitaciones de las soluciones actuales, se deduce que un control provisto independientemente de los propios dispositivos de red añadiría flexibilidad a dichas redes. Por consiguiente, la presente tesis explora la aplicabilidad de las redes definidas por software (Software-Defined Networking, SDN) en sistemas de automatización industrial. Para llevar a cabo este enfoque, se ha tomado como caso de estudio las redes de automatización basadas en el estándar IEC 61850, el cual es ampliamente usado en el diseño de las redes de comunicaciones en sistemas de distribución de energía, tales como las subestaciones eléctricas. El estándar IEC 61850 define diferentes servicios y protocolos con altos requisitos en terminos de latencia y disponibilidad de la red, los cuales han de ser satisfechos mediante técnicas de ingeniería de tráfico. Como resultado, aprovechando la flexibilidad y programabilidad ofrecidas por las redes definidas por software, en esta tesis se propone una arquitectura de control basada en el protocolo OpenFlow que, incluyendo tecnologías de gestión y monitorización de red, permite establecer políticas de tráfico acorde a su prioridad y al estado de la red.Además, las subestaciones eléctricas son un ejemplo representativo de infraestructura crítica, que son aquellas en las que un fallo puede resultar en graves pérdidas económicas, daños físicos y materiales. De esta forma, tales sistemas deben ser extremadamente seguros y robustos, por lo que es conveniente la implementación de topologías redundantes que ofrezcan un tiempo de reacción ante fallos mínimo. Con tal objetivo, el estándar IEC 62439-3 define los protocolos Parallel Redundancy Protocol (PRP) y High-availability Seamless Redundancy (HSR), los cuales garantizan un tiempo de recuperación nulo en caso de fallo mediante la redundancia activa de datos en redes Ethernet. Sin embargo, la gestión de redes basadas en PRP y HSR es estática e inflexible, lo que, añadido a la reducción de ancho de banda debida la duplicación de datos, hace difícil un control eficiente de los recursos disponibles. En dicho sentido, esta tesis propone control de la redundancia basado en el paradigma SDN para un aprovechamiento eficiente de topologías malladas, al mismo tiempo que se garantiza la disponibilidad de las aplicaciones de control y monitorización. En particular, se discute cómo el protocolo OpenFlow permite a un controlador externo configurar múltiples caminos redundantes entre dispositivos con varias interfaces de red, así como en entornos inalámbricos. De esta forma, los servicios críticos pueden protegerse en situaciones de interferencia y movilidad.La evaluación de la idoneidad de las soluciones propuestas ha sido llevada a cabo, principalmente, mediante la emulación de diferentes topologías y tipos de tráfico. Igualmente, se ha estudiado analítica y experimentalmente cómo afecta a la latencia el poder reducir el número de saltos en las comunicaciones con respecto al uso de un árbol de expansión, así como balancear la carga en una red de nivel 2. Además, se ha realizado un análisis de la mejora de la eficiencia en el uso de los recursos de red y la robustez alcanzada con la combinación de los protocolos PRP y HSR con un control llevado a cabo mediante OpenFlow. Estos resultados muestran que el modelo SDN podría mejorar significativamente las prestaciones de una red industrial de misión crítica

Time-sensitive networking for interlock propagation in the IFMIF-DONES facility

In this study, we have proposed the use of time-sensitive networking (TSN) technologies for the distribution of the interlock signals of the machine protection system of the future IFMIF-DONES particle accelerator, required for implementing the protection mechanisms of the different systems in the facility. Such facilities usually rely on different fieldbus technologies or direct wiring for their transmission, typically leading to complex network infrastructures and interoperability problems. We provide insights of how TSN could simplify the deployment of the interlock network by aggregating all the traffic under the same network infrastructure, whilst guaranteeing the latency and timing constraints. Since TSN is built on top of Ethernet technology, it also benefits from other network services and all its related developments, including redundancy and bandwidth improvements. The main challenge to address is the transmission of the interlock signals with very low latency between devices located in different points of the facility. We have characterized our initial TSN architecture prototype, evaluated the latency and bandwidth obtained with this solution, identified applications to effectively shape the attainable determinism, and found shortcomings and areas of future improvements.Amiga-7 Grant RTI2018-096228-B-C32Programa Operativo FEDER/Junta de Andalucia SINPA Grant SINPA B-TIC-445-UGR18EU DAIS Project 101007273-2Spanish Government FPU20/01857, FPU20/05842Misiones CDTI 2021 framework (DONES-EVO) MIG-20211006European Union via the Euratom Research and Training Programme 10105220

Smart Local Backup Protection for Smart Substation

This paper presents a novel smart local backup protection SLBP used for the support and backup of the protective relays in a smart substation. The proposed SLBP is based on the IEC61850 standards and the concept consists of the acquisition of Generic Object Oriented Substation Event GOOSE used for tripping and interlocks exchange between Intelligent Equipment Devices IEDs and the reading of the Sampled Value SV existing in the process bus coming from Mergin Units MU or Non-Conventional Instrument Transformers NCIT. Several logical schemes to protect different zones of the substation are presented and how can be integrated using data in the substation automation system. The SLBP was developed using an open source library and free operating system. Moreover, a low cost prototype is presented in order to evaluate the efficiency and the operation of the SLBP under diverse scenarios of the proposed logical protective schemes such us breaker failure and overcurrent protectio

Emerging technologies and future trends in substation automation systems for the protection, monitoring and control of electrical substations

Tese de Mestrado Integrado. Engenharia Electrotécnica e de Computadores (Automação). Faculdade de Engenharia. Universidade do Porto. 201