On a Joint Physical Layer and Medium Access Control Sublayer Design for Efficient Wireless Sensor Networks and Applications

Wireless sensor networks (WSNs) are distributed networks comprising small sensing devices equipped with a processor, memory, power source, and often with the capability for short range wireless communication. These networks are used in various applications, and have created interest in WSN research and commercial uses, including industrial, scientific, household, military, medical and environmental domains. These initiatives have also been stimulated by the finalisation of the IEEE 802.15.4 standard, which defines the medium access control (MAC) and physical layer (PHY) for low-rate wireless personal area networks (LR-WPAN). Future applications may require large WSNs consisting of huge numbers of inexpensive wireless sensor nodes with limited resources (energy, bandwidth), operating in harsh environmental conditions. WSNs must perform reliably despite novel resource constraints including limited bandwidth, channel errors, and nodes that have limited operating energy. Improving resource utilisation and quality-of-service (QoS), in terms of reliable connectivity and energy efficiency, are major challenges in WSNs. Hence, the development of new WSN applications with severe resource constraints will require innovative solutions to overcome the above issues as well as improving the robustness of network components, and developing sustainable and cost effective implementation models. The main purpose of this research is to investigate methods for improving the performance of WSNs to maintain reliable network connectivity, scalability and energy efficiency. The study focuses on the IEEE 802.15.4 MAC/PHY layers and the carrier sense multiple access with collision avoidance (CSMA/CA) based networks. First, transmission power control (TPC) is investigated in multi and single-hop WSNs using typical hardware platform parameters via simulation and numerical analysis. A novel approach to testing TPC at the physical layer is developed, and results show that contrary to what has been reported from previous studies, in multi-hop networks TPC does not save energy. Next, the network initialization/self-configuration phase is addressed through investigation of the 802.15.4 MAC beacon interval setting and the number of associating nodes, in terms of association delay with the coordinator. The results raise doubt whether that the association energy consumption will outweigh the benefit of duty cycle power management for larger beacon intervals as the number of associating nodes increases. The third main contribution of this thesis is a new cross layer (PHY-MAC) design to improve network energy efficiency, reliability and scalability by minimising packet collisions due to hidden nodes. This is undertaken in response to findings in this thesis on the IEEE 802.15.4 MAC performance in the presence of hidden nodes. Specifically, simulation results show that it is the random backoff exponent that is of paramount importance for resolving collisions and not the number of times the channel is sensed before transmitting. However, the random backoff is ineffective in the presence of hidden nodes. The proposed design uses a new algorithm to increase the sensing coverage area, and therefore greatly reduces the chance of packet collisions due to hidden nodes. Moreover, the design uses a new dynamic transmission power control (TPC) to further reduce energy consumption and interference. The above proposed changes can smoothly coexist with the legacy 802.15.4 CSMA/CA. Finally, an improved two dimensional discrete time Markov chain model is proposed to capture the performance of the slotted 802.15.4 CSMA/CA. This model rectifies minor issues apparent in previous studies. The relationship derived for the successful transmission probability, throughput and average energy consumption, will provide better performance predictions. It will also offer greater insight into the strengths and weaknesses of the MAC operation, and possible enhancement opportunities. Overall, the work presented in this thesis provides several significant insights into WSN performance improvements with both existing protocols and newly designed protocols. Finally, some of the numerous challenges for future research are described

Machine Learning in Wireless Sensor Networks for Smart Cities:A Survey

Artificial intelligence (AI) and machine learning (ML) techniques have huge potential to efficiently manage the automated operation of the internet of things (IoT) nodes deployed in smart cities. In smart cities, the major IoT applications are smart traffic monitoring, smart waste management, smart buildings and patient healthcare monitoring. The small size IoT nodes based on low power Bluetooth (IEEE 802.15.1) standard and wireless sensor networks (WSN) (IEEE 802.15.4) standard are generally used for transmission of data to a remote location using gateways. The WSN based IoT (WSN-IoT) design problems include network coverage and connectivity issues, energy consumption, bandwidth requirement, network lifetime maximization, communication protocols and state of the art infrastructure. In this paper, the authors propose machine learning methods as an optimization tool for regular WSN-IoT nodes deployed in smart city applications. As per the author’s knowledge, this is the first in-depth literature survey of all ML techniques in the field of low power consumption WSN-IoT for smart cities. The results of this unique survey article show that the supervised learning algorithms have been most widely used (61%) as compared to reinforcement learning (27%) and unsupervised learning (12%) for smart city applications

Efficient Information Access in Data-Intensive Sensor Networks

Recent advances in wireless communications and microelectronics have enabled wide deployment of smart sensor networks. Such networks naturally apply to a broad range of applications that involve system monitoring and information tracking (e.g., fine-grained weather/environmental monitoring, structural health monitoring, urban-scale traffic or parking monitoring, gunshot detection, monitoring volcanic eruptions, measuring rate of melting glaciers, forest fire detection, emergency medical care, disaster response, airport security infrastructure, monitoring of children in metropolitan areas, product transition in warehouse networks etc.).Meanwhile, existing wireless sensor networks (WSNs) perform poorly when the applications have high bandwidth needs for data transmission and stringent delay constraints against the network communication. Such requirements are common for Data Intensive Sensor Networks (DISNs) implementing Mission-Critical Monitoring applications (MCM applications).We propose to enhance existing wireless network standards with flexible query optimization strategies that take into account network constraints and application-specific data delivery patterns in order to meet high performance requirements of MCM applications.In this respect, this dissertation has two major contributions: First, we have developed an algebraic framework called Data Transmission Algebra (DTA) for collision-aware concurrent data transmissions. Here, we have merged the serialization concept from the databases with the knowledge of wireless network characteristics. We have developed an optimizer that uses the DTA framework, and generates an optimal data transmission schedule with respect to latency, throughput, and energy usage. We have extended the DTA framework to handle location-based trust and sensor mobility. We improved DTA scalability with Whirlpool data delivery mechanism, which takes advantage of partitioning of the network. Second, we propose relaxed optimization strategy and develop an adaptive approach to deliver data in data-intensive wireless sensor networks. In particular, we have shown that local actions at nodes help network to adapt in worse network conditions and perform better. We show that local decisions at the nodes can converge towards desirable global network properties e.g.,high packet success ratio for the network. We have also developed a network monitoring tool to assess the state and dynamic convergence of the WSN, and force it towards better performance

Dynamic Bayesian Collective Awareness Models for a Network of Ego-Things

A novel approach is proposed for multimodal collective awareness (CA) of multiple networked intelligent agents. Each agent is here considered as an Internet-of-Things (IoT) node equipped with machine learning capabilities; CA aims to provide the network with updated causal knowledge of the state of execution of actions of each node performing a joint task, with particular attention to anomalies that can arise. Data-driven dynamic Bayesian models learned from multisensory data recorded during the normal realization of a joint task (agent network experience) are used for distributed state estimation of agents and detection of abnormalities. A set of switching dynamic Bayesian network (DBN) models collectively learned in a training phase, each related to particular sensorial modality, is used to allow each agent in the network to perform synchronous estimation of possible abnormalities occurring when a new task of the same type is jointly performed. Collective DBN (CDBN) learning is performed by unsupervised clustering of generalized errors (GEs) obtained from a starting generalized model. A growing neural gas (GNG) algorithm is used as a basis to learn the discrete switching variables at the semantic level. Conditional probabilities linking nodes in the CDBN models are estimated using obtained clusters. CDBN models are associated with a Bayesian inference method, namely, distributed Markov jump particle filter (D-MJPF), employed for joint state estimation and abnormality detection. The effects of networking protocols and of communications in the estimation of state and abnormalities are analyzed. Performance is evaluated by using a small network of two autonomous vehicles performing joint navigation tasks in a controlled environment. In the proposed method, first the sharing of observations is considered in ideal condition, and then the effects of a wireless communication channel have been analyzed for the collective abnormality estimation of the agents. Rician wireless channel and the usage of two protocols (i.e., IEEE 802.11p and IEEE 802.15.4) along with different channel conditions are considered as well

Minimal Infrastructure Radio Frequency Home Localisation Systems

The ability to track the location of a subject in their home allows the provision of a number of location based services, such as remote activity monitoring, context sensitive prompts and detection of safety critical situations such as falls. Such pervasive monitoring functionality offers the potential for elders to live at home for longer periods of their lives with minimal human supervision. The focus of this thesis is on the investigation and development of a home roomlevel localisation technique which can be readily deployed in a realistic home environment with minimal hardware requirements. A conveniently deployed Bluetooth ® localisation platform is designed and experimentally validated throughout the thesis. The platform adopts the convenience of a mobile phone and the processing power of a remote location calculation computer. The use of Bluetooth ® also ensures the extensibility of the platform to other home health supervision scenarios such as wireless body sensor monitoring. Central contributions of this work include the comparison of probabilistic and nonprobabilistic classifiers for location prediction accuracy and the extension of probabilistic classifiers to a Hidden Markov Model Bayesian filtering framework. New location prediction performance metrics are developed and signicant performance improvements are demonstrated with the novel extension of Hidden Markov Models to higher-order Markov movement models. With the simple probabilistic classifiers, location is correctly predicted 80% of the time. This increases to 86% with the application of the Hidden Markov Models and 88% when high-order Hidden Markov Models are employed. Further novelty is exhibited in the derivation of a real-time Hidden Markov Model Viterbi decoding algorithm which presents all the advantages of the original algorithm, while producing location estimates in real-time. Significant contributions are also made to the field of human gait-recognition by applying Bayesian filtering to the task of motion detection from accelerometers which are already present in many mobile phones. Bayesian filtering is demonstrated to enable a 35% improvement in motion recognition rate and even enables a floor recognition rate of 68% using only accelerometers. The unique application of time-varying Hidden Markov Models demonstrates the effect of integrating these freely available motion predictions on long-term location predictions

Energy-aware routing protocols in wireless sensor networks

Saving energy and increasing network lifetime are significant challenges in the field of Wireless Sensor Networks (WSNs). Energy-aware routing protocols have been introduced for WSNs to overcome limitations of WSN including limited power resources and difficulties renewing or recharging sensor nodes batteries. Furthermore, the potentially inhospitable environments of sensor locations, in some applications, such as the bottom of the ocean, or inside tornados also have to be considered. ZigBee is one of the latest communication standards designed for WSNs based on the IEEE 802.15.4 standard. The ZigBee standard supports two routing protocols, the Ad hoc On-demand Distance Vector (AODV), and the cluster-tree routing protocols. These protocols are implemented to establish the network, form clusters, and transfer data between the nodes. The AODV and the cluster-tree routing protocols are two of the most efficient routing protocols in terms of reducing the control message overhead, reducing the bandwidth usage in the network, and reducing the power consumption of wireless sensor nodes compared to other routing protocols. However, neither of these protocols considers the energy level or the energy consumption rate of the wireless sensor nodes during the establishment or routing processes. (Continues...)