Design of 4-Bit 4-Tap FIR Filter Based on Quantum-Dot Cellular Automata (QCA) Technology with a Realistic Clocking Scheme

The increasing demand for efficient signal processors necessitates the design of digital finite duration impulse response FIR filter which occupies less area and consumes less power. FIR filters have simple, regular and scalable structures. This paper represents designing and implementation of a low-power 4-tap FIR filter based on quantum-dot cellular automata (QCA) by using a realistic clocking scheme. The QCADesigner software, as widely used in QCA circuit design and verification, has been used to implement and to verify all of the designs in this study. Power dissipation result has been computed for the proposed circuit using accurate QCADesigner-E software. The proposed QCA FIR achieves about 97.74% reduction in power compared to previous existing designs. The outcome of this work can clearly open up a new window of opportunity for low-power signal processing system

Quantum-dot Cellular Automata: Review Paper

Quantum-dot Cellular Automata (QCA) is one of the most important discoveries that will be the successful alternative for CMOS technology in the near future. An important feature of this technique, which has attracted the attention of many researchers, is that it is characterized by its low energy consumption, high speed and small size compared with CMOS.  Inverter and majority gate are the basic building blocks for QCA circuits where it can design the most logical circuit using these gates with help of QCA wire. Due to the lack of availability of review papers, this paper will be a destination for many people who are interested in the QCA field and to know how it works and why it had taken lots of attention recentl

A Novel Reconfiguration Scheme in Quantum-Dot Cellular Automata for Energy Efficient Nanocomputing

Quantum-Dot Cellular Automata (QCA) is currently being investigated as an alternative to CMOS technology. There has been extensive study on a wide range of circuits from simple logical circuits such as adders to complex circuits such as 4-bit processors. At the same time, little if any work has been done in considering the possibility of reconfiguration to reduce power in QCA devices. This work presents one of the first such efforts when considering reconfigurable QCA architectures which are expected to be both robust and power efficient. We present a new reconfiguration scheme which is highly robust and is expected to dissipate less power with respect to conventional designs. An adder design based on the reconfiguration scheme will be presented in this thesis, with a detailed power analysis and comparison with existing designs. In order to overcome the problems of routing which comes with reconfigurability, a new wire crossing mechanism is also presented as part of this thesis

Towards FPGA hardware in the loop for QCA simulation

As transistors begin to hit raw physical limits and performance barriers, other technologies are being researched to potentially replace conventional integrated circuit technology. Quantum-dot Cellular Automata (QCA) is one such technology which executes computations using coulomb interactions and quantum-mechanical effects. Part of this research is pursuant to the design of circuits which exploit QCA technology and take advantage of what it has to offer. These circuits must be simulated to ensure their functionality and help prove the viability of QCA. These simulations, like many scientific computing applications, can take a long time to complete; hours or days, depending on their size and complexity. Many scientific applications have benefitted from research into Field Programmable Gate Array (FPGA) application development, which has been used to accelerate the speed at which such simulations execute. This thesis investigates the possibility of using FPGAs to accelerate the simulation of QCA circuits. The hardware developed is a streaming type architecture using floating point arithmetic and hardware/software techniques. Hardware implementation shows the system to run slower than the existing software code, but demonstrates the ability to simulate a small QCA circuit. Analysis of the design reveals good potential for achieving speedup, and an alternate design is proposed to improve the execution time. In the course of this work, improvements to the existing software are also developed and contributed to the community

Fault and Defect Tolerant Computer Architectures: Reliable Computing With Unreliable Devices

This research addresses design of a reliable computer from unreliable device technologies. A system architecture is developed for a fault and defect tolerant (FDT) computer. Trade-offs between different techniques are studied and yield and hardware cost models are developed. Fault and defect tolerant designs are created for the processor and the cache memory. Simulation results for the content-addressable memory (CAM)-based cache show 90% yield with device failure probabilities of 3 x 10(-6), three orders of magnitude better than non fault tolerant caches of the same size. The entire processor achieves 70% yield with device failure probabilities exceeding 10(-6). The required hardware redundancy is approximately 15 times that of a non-fault tolerant design. While larger than current FT designs, this architecture allows the use of devices much more likely to fail than silicon CMOS. As part of model development, an improved model is derived for NAND Multiplexing. The model is the first accurate model for small and medium amounts of redundancy. Previous models are extended to account for dependence between the inputs and produce more accurate results

Design and simulation of a new QCA-based low-power universal gate

Quantum-dot Cellular Automata (QCA) is recognized in electronics for its low power consumption and high-density capabilities, emerging as a potential substitute for CMOS technology. GDI (Gate Diffusion Input) technology is featured as an innovative approach for enhancing power efficiency and spatial optimization in digital circuits. This study introduces an advanced four-input Improved Gate Diffusion Input (IGDI) design specifically for QCA technology as a universal gate. A key feature of the proposed 10-cell block is the absence of cross-wiring, which significantly enhances the circuit’s operational efficiency. Its universal cell nature allows for the carrying out of various logical gates by merely altering input values, without necessitating any structural redesign. The proposed design showcases notable advancements over prior models, including a reduced cell count by 17%, a 29% decrease in total energy usage, and a 44% reduction in average energy loss. This innovative IGDI design efficiently executes 21 combinational and various sequential functions. Simulations in 18 nm technology, accompanied by energy consumption analyses, demonstrate this design’s superior performance compared to existing models in key areas such as multiplexers, comparators, and memory circuits, alongside a significant reduction in cell count

Designing memory cells with a novel approaches based on a new multiplexer in QCA Technology

Transistor-based CMOS technology has many drawbacks such that it cannot continue to follow the scaling of Moore’s law in the near future. These drawbacks lead researchers to think about alternatives. Quantum-dot Cellular Automata (QCA) is a nanotechnology that has unique features in terms of size and power consumption. QCA has the ability to represent binary numbers by electrons configuration. The memory circuit is a very important part of the digital system. In QCA technology, there are many approaches presented to accomplish memory cells in both RAM and CAM types. CAM is a type of memory used in high-speed applications. In this thesis, novel approaches to design memory cells are proposed. The proposed approaches are based on a 2:1 multiplexer. Using the proposed approach of RAM cell, a singular form of RAM cell (SFRAMC) is accomplished. In QCA technology, researchers strive to design electronic circuits with an emphasis on minimizing important metrics such as cell count, area, delay, cost and power consumption. The SFRAMC demonstrated significant improvements, with a reduction cell count, occupied area and power consumption by 25%, 24% and 36%. In terms of implementation cost, the SFRAMC saves 43% of the cost when compared to the previous best design. On the other hand, by using the proposed approach of CAM cell, two different structures of the QCA-CAM cell have been introduced. The first proposed CAM cell (FPCAMC) gives improvements in terms of cell count, and delay by 15% and 17% respectively. The second proposed CAM cell (SPCAMC) gives improvements in terms of cell count, and delay by 6% and 17% respectively. In terms of total power consumption, both FPCAMC and SPCAMC have an improvement of about 53% over the best-reported design. The above features of the proposed memory cells (RAM and CAM) could pave the road for designing energy-efficient and cost-efficient memory circuits in the future