68 research outputs found
Recommended from our members
Digital enhancement techniques for data converters in scaled CMOS technologies
This thesis presents digital enhancement techniques for data converters in advanced technology nodes. With technology scaling, traditional voltage-domain (VD) analog-to-digital converters (ADCs) face two major challenges: (1) reduction of dynamic range due to supply voltage scaling, and (2) decrease in intrinsic gain of transistors which makes high gain amplifier design tough. To address these challenges, a two-stage ADC architecture is presented which uses time-domain quantization to exploit the advantages of technology scaling. The architecture, consisting of a first stage successive approximation register (SAR) and a second stage ring oscillator, is highly digital and scaling friendly. Two prototypes have been developed to validate the proposed architecture. The 40nm CMOS prototype achieves 75.7 dB dynamic range at an excellent Schreier figure-of-merit of 172.2 dB. The proposed architecture has been extended to a capacitance-to-digital converter and a prototype has been developed in 40nm CMOS. The prototype can sense capacitances with a resolution of 1.3fF and has a Walden figure-of-merit of 60 fJ/step which is more than two times better than the current state-of-the-art. This thesis also presents digital techniques to improve performance of continuous-time(CT), delta-sigma digital-to-analog converters (DACs). Recently, CT delta-sigma DACs have received more attention than their discrete, switched-capacitor counterpart mainly because of low power and/or higher speed of operation. However, a critical disadvantage of CT, delta-sigma DACs is their greatly increased sensitivity to inter-symbol interference (ISI) error. To address this shortcoming of CT DACs, this thesis presents several algorithms that can mitigate ISI error simultaneously with static mismatch error. Further, the proposed algorithms are fully digital in nature and as such, are best poised to take maximum advantage of technology scaling. Thus, the techniques presented in this thesis will be important enabling factors in raising the envelope of performance of CT delta-sigma DACs in advanced technology nodes.Electrical and Computer Engineerin
Recommended from our members
High efficiency delta-sigma modulation data converters
Enabled by continued device scaling in CMOS technology, more and more functions that were previously realized in separate chips are getting integrated on a single chip nowadays. Integration on silicon has opened the door to new portable wireless applications, and initiated a widespread use of these devices in our common everyday life. Wide signal bandwidth, high linearity and dynamic range, and low power dissipation are required of embedded data converters that are the performance-limiting key building blocks of those systems. Thus, power-efficient and highly-linear data conversion over wide range of signal bands is essential to get the full benefits from device scaling. This continued trend keeps innovation in the design of data converter continuing.
Traditionally, delta-sigma modulation data converters proved to be very effective in applications where high resolution was necessary in a relatively narrow signal band. There have been active research efforts across academia and industry on the extension of achievable signal bandwidth without compromising the performance of these data converters. In this dissertation, architectural innovations, combined with effective design techniques for delta-sigma modulation data converters, are presented to overcome the associated limitations. The effectiveness of the proposed approaches is demonstrated by test results for the following state-of-the-art prototype designs: (1) a 0.8 V, 2.6 mW, 88 dB dual-channel audio delta-sigma modulation D/A converter with headphone driver; (2) an 88 dB ring-coupled delta-sigma ADC with 1.9 MHz bandwidth and -102.4 dB THD; (3) a multi-cell noise-coupled delta-sigma ADC with 1.9 MHz bandwidth, 88 dB DR, and -98 dB THD; (4) an 8.1 mW, 82 dB self-coupled delta-sigma ADC with 1.9 MHz bandwidth and -97 dB THD; (5) a noise-coupled time-interleaved delta-sigma ADC with 4.2 MHz bandwidth, -98 dB THD, and 79 dB SNDR; (6) a noise-coupled time-interleaved delta-sigma ADC with 2.5 MHz bandwidth, -104 dB THD, and 81 dB SNDR. As an extension of this research, two novel architectures for efficient double-sampling delta-sigma ADCs and improved low-distortion delta-sigma ADC are proposed, and validated by extensive simulations.Keywords: improved low-distortion modulator, time interleaving, data converter, multi-cell ADC, efficient double sampling, noise coupling, delta-sigma modulatio
Multibit delta sigma modulator with noise shaping dynamic element matching
Ph.DDOCTOR OF PHILOSOPH
Recommended from our members
Enhanced-accuracy oversampled data converters
Digital-to-analog converters (DACs) suffer from static and dynamic nonlinearity problems, which degrade their accuracy and performance. Mismatch errors in the analog components restrict the maximum achievable linearity.
This thesis presents various techniques for correcting these errors. It describes a correction process for the nonlinear behavior of DACs, on three different levels: architectural design, circuit design, and layout design.
The main results achieved are listed below:
• Novel topologies using stochastic approaches to linearize multibit converters are presented.
• A new method is introduced for avoiding the use of multibit DACs in the main loop of multi-path DS analog-to-digital converters (ADCs), which, combined with a novel noise leakage compensation technique, allows the use of low quality inner DACs.
• A novel correction algorithm is proposed, which is based on the acquisition of the individual DAC errors by means of correlation procedures. The extracted values are used for correction purposes. The technique is capable of background operation.
• Different circuits are proposed to improve the performance of current-steering DACs. Also, novel layout techniques are shown for reducing the spatial variations of the unit sources. Some of the presented techniques were combined in a prototype chip, designed and fabricated in a 0.35μm CMOS process. Simulation and preliminary measurement results show that they are effective.Keywords: data converters, digital-to-analog, integrated circuits, analog-to-digital, CMO
Recommended from our members
High-performance delta-sigma analog-to-digital converters
Multi-stage delta-sigma (ΔΣ) architectures, commonly known as MASH, are the preferred choice for analog-to-digital converters (ADCs) used in broadband communication applications, where high-resolution (above 14 bits) and high-bandwidth (several MHz) performances are required. Current state-of-the-art designs are capable of as much as 5-MS/s output data rates with 90-dB SNR. However, inherent limitations in this type of converters have been addressed by the use of high-quality analog circuit components, making designs more complex, less robust, and higher performances difficult to achieve. This thesis describes the problems of extending bandwidth without losing accuracy in ΔΣ A/D converters, and presents three techniques which can overcome these problems: a low-distortion analog signal processing technique, the digital adaptive correction of analog circuit imperfections, and the fully digital estimation and correction of DAC errors. Combined, these techniques have the potential to achieve high-speed, high-resolution wideband ΔΣ conversion, even with low-performance analog components. The presented techniques were combined in a prototype chip, designed and fabricated in a 0.18 μm CMOS process. Simulation and preliminary measurement results show that they are highly effective
Design of a wideband low-power continuous-time sigma-delta (ΣΔ) analog-to-digital converter (ADC) in 90nm CMOS technology
The growing trend in VLSI systems is to shift more signal processing functionality from analog to digital domain to reduce manufacturing cost and improve reliability. It has resulted in the demand for wideband high-resolution analog-to-digital converters (ADCs). There are many different techniques for doing analog-to-digital conversions. Oversampling ADC based on sigma-delta (ΣΔ) modulation is receiving a lot of attention due to its significantly relaxed matching requirements on analog components. Moreover, it does not need a steep roll-off anti-aliasing filter. A ΣΔ ADC can be implemented either as a discrete time system or a continuous time one. Nowadays growing interest is focused on the continuous-time ΣΔ ADC for its use in the wideband and low-power applications, such as medical imaging, portable ultrasound systems, wireless receivers, and test equipments. A continuous-time ΣΔ ADC offers some important advantages over its discrete-time counterpart, including higher sampling frequency, intrinsic anti-alias filtering, much relaxed sampling network requirements, and low-voltage implementation. Especially it has the potential in achieving low power consumption.
This dissertation presents a novel fifth-order continuous-time ΣΔ ADC which is implemented in a 90nm CMOS technology with single 1.0-V power supply. To speed up design process, an improved direct design method is proposed and used to design the loop filter transfer function. To maximize the in-band gain provided by the loop filter, thus maximizing in-band noise suppression, the excess loop delay must be kept minimum. In this design, a very low latency 4-bit flash quantizer with digital-to-analog (DAC) trimming is utilized. DAC trimming technique is used to correct the quantizer offset error, which allows minimum-sized transistors to be used for fast and low-power operation. The modulator has sampling clock of 800MHz. It achieves a dynamic range (DR) of 75dB and a signal-to-noise-and-distortion ratio (SNDR) of 70dB over 25MHz input signal bandwidth with 16.4mW power dissipation. Our work is among the most improved published to date. It uses the lowest supply voltage and has the highest input signal bandwidth while dissipating the lowest power among the bandwidths exceeding 15MHz
- …