Some Permanent Magnet Synchronous Motor (PMSM) Sensorless Control Methods based on Operation Speed Area

This paper compares some sensorless Permanent Magnet Synchronous Motor (PMSM) controls for driving an electric vehicle in terms of operating speed. Sensorless control is a type of control method in which sensors, such as speed and position sensors, are not used to measure controlled variables.  The controlled variable value is estimated from the stator current measurement. Sensorless control performance is not as good as a sensor-based system. This paper aims are to recommend a control method for the PMSM sensorless controls that would be used to drive an electric vehicle. The methods that we will discuss are divided into four categories based on the operation speed area.  They are a startup, low speed, high speed, and low and high-speed areas. The low and high-speed area will be divided into with and without switching.  If PMSM more work at high speed, the most speed area that is used, we prefer to choose the method that works at high speed, that is, the modification or combination of two or more conventional methods

Application of Sliding Mode Controller and Linear Active Disturbance Rejection Controller to a PMSM Speed System

Permanent magnet synchronous motor (PMSM) is a popular electric machine in industry for its small volume, high electromagnetic torque, high reliability and low cost. It is broadly used in automobiles and aircrafts. However, PMSM has its inherent problems of nonlinearity and coupling, which are challenges for control systems design. In addition, the external disturbances such as load variation and noises could degrade the systems performance. Both sliding mode control (SMC) and active disturbance rejection control (ADRC) are robust against disturbances. They can also compensate the nonlinearity and couplings of the PMSM. Therefore, in this thesis, we apply both SMC and ADRC to a PMSM speed system. Our control goal is to drive the speed outputs of the PMSM speed system to reference signals in the presences of nonlinearity, disturbance, and parameter variations. Simulation results verify the effectiveness of SMC and ADRC on the speed control for PMSM systems in spite of the presences of external disturbance and internal system uncertaintie

An Equivalent Circuit Model for Predicting the Core Loss in a Claw-Pole Permanent Magnet Motor with Soft Magnetic Composite Core

© 1965-2012 IEEE. Soft magnetic composite (SMC) materials and SMC electromagnetic devices have attracted strong research interest in the past decades. However, SMC devices have large core loss that needs to be put into consideration even at the design stage. Effective and accurate prediction of the core loss becomes crucial for the design and optimization of high-performance motors with these materials. Equivalent circuit model is a widely used method for machine analysis, due to the advantages in the fast calculation with a clear physical mechanism. This paper presents an equivalent circuit model to predict the core loss of a claw-pole permanent magnet motor with SMC stator core. All the parameters including the equivalent core-loss resistance in the equivalent circuit model are identified based on the finite-element method to achieve high accuracy, and the effectiveness of the parameters identification methods is experimentally verified. The proposed equivalent circuit model can predict the core loss and motor's performance efficiently both under no-load and loading conditions

Magnetic Material Modelling of Electrical Machines

The need for electromechanical energy conversion that takes place in electric motors, generators, and actuators is an important aspect associated with current development. The efficiency and effectiveness of the conversion process depends on both the design of the devices and the materials used in those devices. In this context, this book addresses important aspects of electrical machines, namely their materials, design, and optimization. It is essential for the design process of electrical machines to be carried out through extensive numerical field computations. Thus, the reprint also focuses on the accuracy of these computations, as well as the quality of the material models that are adopted. Another aspect of interest is the modeling of properties such as hysteresis, alternating and rotating losses and demagnetization. In addition, the characterization of materials and their dependence on mechanical quantities such as stresses and temperature are also considered. The reprint also addresses another aspect that needs to be considered for the development of the optimal global system in some applications, which is the case of drives that are associated with electrical machines

Power Loss Analysis in Thermal Design of Permanent Magnet Machines:A Review

This paper reviews recent developments in power loss analysis applicable, but not limited to, the thermal design of permanent magnet (PM) machines. Accurate and computationally efficient loss prediction is an essential element in thermal analysis of electrical machines, and has become an increasingly important part of the machine design process.The continuous drive toward ‘more electric’ technologies has resulted in a need for a more comprehensive and detailed design approach, where various multi-physics and multi-disciplinary effects are accounted for. This ‘design for application’ methodology relies strongly on the advancements and evolution of the existing theoretical and experimental design techniques to satisfy the evermore-demanding machine design requirements. The thermal behaviour and efficiency of the power conversion are essential performance measures, in the ‘design for application’ approach.An overview of the challenges and limitations regarding power loss analysis in the context of thermal design of electrical machines is provided in this paper. All of the major loss components associated with the active parts of a machine assembly are discussed

Traction motors for electric vehicles: Maximization of mechanical efficiency – A review

With the accelerating electrification revolution, new challenges and opportunities are yet emerging, despite range anxiety is still one of the biggest obstacles. Battery has been in the spotlight for resolving this problem, but other critical vehicle components such as traction motors are the key to efficient propulsion. Traction motor design involves a multidisciplinary approach, with still significant room for improvement in terms of efficiency. Therefore, this paper provides a comprehensive review of scientific literature looking at various aspects of traction motors to maximize mechanical efficiency for the application to high-performance Battery Electric Vehicles. At first, and overview on the mechanical design of electric motors is presented, focusing on topology selection, efficiency, transmission systems, and vehicle layouts; Special attention is then paid to the thermal management, as it is one of the main aspects that affects the global efficiency of such machines; thirdly, the paper presents a discussion on possible future trends to tackle ongoing challenges and to further enhance the performance of traction motors

Flux switching machine design for high-speed geared drives

Electrical machines capable of high-speed operation are key technology used in many modern applications, such as gas turbine electrical systems, high-speed fly-wheels, turbochargers, and computer numerical control (CNC) machines. The use of geared high-speed machines to replace low-speed high torque drives has not been adequately researched to-date. The rationale of this thesis is to investigate a candidate high speed machine, namely flux switching machines to be used together with new types of core material with mechanical gearing to deliver high-torque and low speeds. Modern developments in advanced material technology have produced new magnetic materials capable of dealing with high resulting in very low losses in high speed machines. However, such metals typically have low mechanical strength, and they are found to be brittle. In order to manufacture electromechanical device with such new materials, it has to be reinforced with a mechanically strong structure. The use of multiple types of magnetic materials referred as a MMLC has been proposed in this thesis for high-speed machine design. In this research, a generic method using magnetic equivalent circuit to model flux switching machines (FSMs) is investigated. Moreover modeling, based on machine dimensions for multiphase FSMs having any pole and slot number has been introduced. The air-gap permeance modeling to simplify the magnetic circuit calculation of FSMs was also investigated in this thesis. It is shown that the permeability of magnetic material can be adjusted with the use of MMLC material. Using this feature, the FSM mathematical model is used to show the impact on electromagnetic performance using MMLCs and is shown to be beneficial. In order the evaluate the weight benefits of using geared high speed FSMs, the planetary gear systems are studies and their design constraints have been identified. An abstract form of weight estimation for given torque and speed requirements has been developed and validated using commercially available planetary gear specifications. FSMs together with gear boxes have been considered and it is shown that significant weight savings can be achieved at higher diameter and at high speeds

High Speed flywheel and test rig design for rural energy storage

There is considerable growth in the renewable energy sector to contribute to sustainable development, environmental conservation and most importantly to provide affordable energy to isolated rural communities of sub-Saharan Africa. Renewable energy sources such as solar and wind require energy storage since the source of energy is intermittent. Electrochemical batteries especially from lead acid are commonly used to store energy in Solar Home Systems (SHS) for rural electrification in sub-Saharan Africa. Disadvantages such as low efficiencies, low life cycle costs, high maintenance, comparatively short life and serious environmental and human toxicity effects exist. Since recycling is not widespread, replacement costs are high, as are the resultant environmental damage and health hazards from lead and sulphuric acid. In this thesis, an electromechanical flywheel energy storage device is proposed as an alternative to a lead acid battery in order to increase efficiency, life expectancy, increased high depth of discharge, low life cycle cost and elimination of adverse environmental effects. Due to income and service skill constraints in rural areas, the proposed, high speed flywheel systems (for long time energy storage) will require the use of low cost configurations and topologies, special considerations on the flywheel rotor profile design, robust electrical machines, simple power electronics and a low cost bearing set. Low loss magnetic bearings are also possible but were limited by time while also making their maintenance complex especially in rural areas. Conventional high strength composite materials used in flywheel rotor manufacture for high speed operation are expensive. Therefore there is a need to develop techniques to profile the rotor shape so as to improve on material usage and exhibit lower mechanical stresses. A robust electrical machine topology for high speed operation and a simple drive system are investigated to ensure simple assembly, low cost and low maintenance. vii The various flywheel components were designed using analytical and numerical methods. Two techniques were used to develop two optimal profiles for the flywheel rotor structure. Partial differential equations and analytical solutions were employed to develop the profiles. Analytical equations were used to design the electrical machine, drive, bearing system and other accessories. The final electromechanical battery prototype consisted of a composite flywheel rotor made from E-glass fibre materials, double rotor Axial Flux Permanent Magnet (AFPM) machine and a drive system using Brushless DC (BLDC) mode of operation. The system was designed for 300Wh of energy storage for the delivery of 100W and 500W of power and an operating speed range of 8,000 rpm-25,000 rpm. The design and development of the flywheel energy storage system and test rig using locally available materials was investigated. Experiments were conducted for speeds up to 6,000 rpm. The electromechanical battery was able to store a maximum of 77Wh of energy. The shortfall of the system to meet its design specifications was investigated and found to have been caused by vibrations resulting from prototyping issues. A thermal model was developed to predict the temperature rise in the system which showed a good correlation with the experimental results

High-speed electrical machines: technologies, trends and developments

This paper reviews the current technologies used in high speed electrical machines, through an extensive survey of different topologies developed and built in industry as well as in academia for several applications. Developments in materials and components including electrical steels and copper alloys are discussed, and their impact on the machines’ operating physical boundaries is investigated. The main application areas pulling the development of high speed machines are also reviewed in an effort to better understand the typical performance requirements