Opportunistic Networks: Present Scenario- A Mirror Review

Opportunistic Network is form of Delay Tolerant Network (DTN) and regarded as extension to Mobile Ad Hoc Network. OPPNETS are designed to operate especially in those environments which are surrounded by various issues like- High Error Rate, Intermittent Connectivity, High Delay and no defined route between source to destination node. OPPNETS works on the principle of “Store-and-Forward” mechanism as intermediate nodes perform the task of routing from node to node. The intermediate nodes store the messages in their memory until the suitable node is not located in communication range to transfer the message to the destination. OPPNETs suffer from various issues like High Delay, Energy Efficiency of Nodes, Security, High Error Rate and High Latency. The aim of this research paper is to overview various routing protocols available till date for OPPNETs and classify the protocols in terms of their performance. The paper also gives quick review of various Mobility Models and Simulation tools available for OPPNETs simulation

A Survey of Routing Issues and Associated Protocols in Underwater Wireless Sensor Networks

Underwater Wireless Sensor Network is newly emerging wireless technology in which small size sensors with limited energy, limited memory and bandwidth are deployed in deep sea water and various monitoring operation like tactical surveillance, environmental monitoring and data collection are performed through these tiny sensor. Underwater Wireless Sensor Network is used for exploration of underwater resources, oceanographic data collection, flood or disaster prevention, tactical surveillance system and unmanned underwater vehicles. Sensor node consist of small memory, central processing unit and antenna. Underwater network is much different from terrestrial sensor network as radio waves cannot be used in Underwater Wireless Sensor Network. Acoustic channels are used for communication in deep sea water. Acoustic Signals carries with itself many limitation. Such as Limited bandwidth, higher end to end delay, network path loss, higher propagation delay and dynamic topology. Usually these limitation results in higher energy consumption with less number of packets delivered. The main aim now a days is to operate sensor node having smaller battery for a longer time in network. This survey has discussed the state of the art Localization based and Localization free routing protocols. Routing associated issues in the area of Underwater Wireless Sensor Network has also been discussed

Towards Disruption Tolerant ICN

Information-Centric Networking (ICN) is a promi- nent topic in current networking research. ICN design signifi- cantly considers the increased demand of scalable and efficient content distribution for Future Internet. However, intermittently connected mobile environments or disruptive networks present a significant challenge to ICN deployment. In this context, delay tolerant networking (DTN) architecture is an initiative that effec- tively deals with network disruptions. Among all ICN proposals, Content Centric Networking (CCN) is gaining more and more interest for its architectural design, but still has the limitation in highly disruptive environment. In this paper, we design a protocol stack referred as CCNDTN which integrates DTN architecture in the native CCN to deal with network disruption. We also present the implementation details of the proposed CCNDTN. We extend CCN routing strategies by integrating Bundle protocol of DTN architecture. The integration of CCN and DTN enriches the connectivity options of CCN architecture in fragmented networks. Furthermore, CCNDTN can be beneficial through the simultaneous use of all available connectivities and opportunistic networking of DTN for the dissemination of larger data items. This paper also highlights the potential use cases of CCNDTN architecture and crucial questions about integrating CCN and DTNComment: ISCC 201

Performance Modelling and Optimisation of Multi-hop Networks

A major challenge in the design of large-scale networks is to predict and optimise the total time and energy consumption required to deliver a packet from a source node to a destination node. Examples of such complex networks include wireless ad hoc and sensor networks which need to deal with the effects of node mobility, routing inaccuracies, higher packet loss rates, limited or time-varying effective bandwidth, energy constraints, and the computational limitations of the nodes. They also include more reliable communication environments, such as wired networks, that are susceptible to random failures, security threats and malicious behaviours which compromise their quality of service (QoS) guarantees. In such networks, packets traverse a number of hops that cannot be determined in advance and encounter non-homogeneous network conditions that have been largely ignored in the literature. This thesis examines analytical properties of packet travel in large networks and investigates the implications of some packet coding techniques on both QoS and resource utilisation. Specifically, we use a mixed jump and diffusion model to represent packet traversal through large networks. The model accounts for network non-homogeneity regarding routing and the loss rate that a packet experiences as it passes successive segments of a source to destination route. A mixed analytical-numerical method is developed to compute the average packet travel time and the energy it consumes. The model is able to capture the effects of increased loss rate in areas remote from the source and destination, variable rate of advancement towards destination over the route, as well as of defending against malicious packets within a certain distance from the destination. We then consider sending multiple coded packets that follow independent paths to the destination node so as to mitigate the effects of losses and routing inaccuracies. We study a homogeneous medium and obtain the time-dependent properties of the packet’s travel process, allowing us to compare the merits and limitations of coding, both in terms of delivery times and energy efficiency. Finally, we propose models that can assist in the analysis and optimisation of the performance of inter-flow network coding (NC). We analyse two queueing models for a router that carries out NC, in addition to its standard packet routing function. The approach is extended to the study of multiple hops, which leads to an optimisation problem that characterises the optimal time that packets should be held back in a router, waiting for coding opportunities to arise, so that the total packet end-to-end delay is minimised

Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks

[EN] This dissertation addresses the problem of multimedia delivery over multi-hop ad hoc wireless networks, and especially over wireless sensor networks. Due to their characteristics of low power consumption, low processing capacity and low memory capacity, they have major difficulties in achieving optimal quality levels demanded by end users in such communications. In the first part of this work, it has been carried out a study to determine the behavior of a variety of multimedia streams and how they are affected by the network conditions when they are transmitted over topologies formed by devices of different technologies in multi hop wireless ad hoc mode. To achieve this goal, we have performed experimental tests using a test bench, which combine the main codecs used in audio and video streaming over IP networks with different sound and video captures representing the characteristic patterns of multimedia services such as phone calls, video communications, IPTV and video on demand (VOD). With the information gathered in the laboratory, we have been able to establish the correlation between the induced changes in the physical and logical topology and the network parameters that measure the quality of service (QoS) of a multimedia transmission, such as latency, jitter or packet loss. At this stage of the investigation, a study was performed to determine the state of the art of the proposed protocols, algorithms, and practical implementations that have been explicitly developed to optimize the multimedia transmission over wireless ad hoc networks, especially in ad hoc networks using clusters of nodes distributed over a geographic area and wireless sensor networks. Next step of this research was the development of an algorithm focused on the logical organization of clusters formed by nodes capable of adapting to the circumstances of real-time traffic. The stated goal was to achieve the maximum utilization of the resources offered by the set of nodes that forms the network, allowing simultaneously sending reliably and efficiently all types of content through them, and mixing conventional IP data traffic with multimedia traffic with stringent QoS and QoE requirements. Using the information gathered in the previous phase, we have developed a network architecture that improves overall network performance and multimedia streaming. In parallel, it has been designed and programmed a communication protocol that allows implementing the proposal and testing its operation on real network infrastructures. In the last phase of this thesis we have focused our work on sending multimedia in wireless sensor networks (WSN). Based on the above results, we have adapted both the architecture and the communication protocol for this particular type of network, whose use has been growing hugely in recent years.[ES] Esta tesis doctoral aborda el problema de la distribución de contenidos multimedia a través de redes inalámbricas ad hoc multisalto, especialmente las redes inalámbricas de sensores que, debido a sus características de bajo consumo energético, baja capacidad de procesamiento y baja capacidad de memoria, plantean grandes dificultades para alcanzar los niveles de calidad óptimos que exigen los usuarios finales en dicho tipo de comunicaciones. En la primera parte de este trabajo se ha llevado a cabo un estudio para determinar el comportamiento de una gran variedad de flujos multimedia y como se ven afectados por las condiciones de la red cuando son transmitidos a través topologías formadas por dispositivos de diferentes tecnologías que se comunican en modo ad hoc multisalto inalámbrico. Para ello, se han realizado pruebas experimentales sobre una maqueta de laboratorio, combinando los principales códecs empleados en la transmisión de audio y video a través de redes IP con diversas capturas de sonido y video que representan patrones característicos de servicios multimedia tales como las llamadas telefónicas, videoconferencias, IPTV o video bajo demanda (VOD). Con la información reunida en el laboratorio se ha podido establecer la correlación entre los cambios inducidos en la topología física y lógica de la red con los parámetros que miden la calidad de servicio (QoS) de una transmisión multimedia, tales como la latencia el jitter o la pérdida de paquetes. En esta fase de la investigación se realiza un estudio para determinar el estado del arte de las propuestas de desarrollo e implementación de protocolos y algoritmos que se han generado de forma explícita para optimizar la transmisión de tráfico multimedia sobre redes ad hoc inalámbricas, especialmente en las redes inalámbricas de sensores y redes ad hoc utilizando clústeres de nodos distribuidos en un espacio geográfico. El siguiente paso en la investigación ha consistido en el desarrollo de un algoritmo propio para la organización lógica de clústeres formados por nodos capaces de adaptarse a las circunstancias del tráfico en tiempo real. El objetivo planteado es conseguir un aprovechamiento máximo de los recursos ofrecidos por el conjunto de nodos que forman la red, permitiendo de forma simultánea el envío de todo tipo de contenidos a través de ellos de forma confiable y eficiente, permitiendo la convivencia de tráfico de datos IP convencional con tráfico multimedia con requisitos exigentes de QoS y QoE. A partir de la información conseguida en la fase anterior, se ha desarrollado una arquitectura de red que mejora el rendimiento general de la red y el de las transmisiones multimedia de audio y video en particular. De forma paralela, se ha diseñado y programado un protocolo de comunicación que permite implementar el modelo y testear su funcionamiento sobre infraestructuras de red reales. En la última fase de esta tesis se ha dirigido la atención hacia la transmisión multimedia en las redes de sensores inalámbricos (WSN). Partiendo de los resultados anteriores, se ha adaptado tanto la arquitectura como el protocolo de comunicaciones para este tipo concreto de red, cuyo uso se ha extendido en los últimos años de forma considerable[CA] Esta tesi doctoral aborda el problema de la distribució de continguts multimèdia a través de xarxes sense fil ad hoc multi salt, especialment les xarxes sense fil de sensors que, a causa de les seues característiques de baix consum energètic, baixa capacitat de processament i baixa capacitat de memòria, plantegen grans dificultats per a aconseguir els nivells de qualitat òptims que exigixen els usuaris finals en eixos tipus de comunicacions. En la primera part d'este treball s'ha dut a terme un estudi per a determinar el comportament d'una gran varietat de fluxos multimèdia i com es veuen afectats per les condicions de la xarxa quan són transmesos a través topologies formades per dispositius de diferents tecnologies que es comuniquen en mode ad hoc multi salt sense fil. Per a això, s'han realitzat proves experimentals sobre una maqueta de laboratori, combinant els principals códecs empleats en la transmissió d'àudio i vídeo a través de xarxes IP amb diverses captures de so i vídeo que representen patrons característics de serveis multimèdia com son les cridades telefòniques, videoconferències, IPTV o vídeo baix demanda (VOD). Amb la informació reunida en el laboratori s'ha pogut establir la correlació entre els canvis induïts en la topologia física i lògica de la xarxa amb els paràmetres que mesuren la qualitat de servei (QoS) d'una transmissió multimèdia, com la latència el jitter o la pèrdua de paquets. En esta fase de la investigació es realitza un estudi per a determinar l'estat de l'art de les propostes de desenvolupament i implementació de protocols i algoritmes que s'han generat de forma explícita per a optimitzar la transmissió de tràfic multimèdia sobre xarxes ad hoc sense fil, especialment en les xarxes sense fil de sensors and xarxes ad hoc utilitzant clusters de nodes distribuïts en un espai geogràfic. El següent pas en la investigació ha consistit en el desenvolupament d'un algoritme propi per a l'organització lògica de clusters formats per nodes capaços d'adaptar-se a les circumstàncies del tràfic en temps real. L'objectiu plantejat és aconseguir un aprofitament màxim dels recursos oferits pel conjunt de nodes que formen la xarxa, permetent de forma simultània l'enviament de qualsevol tipus de continguts a través d'ells de forma confiable i eficient, permetent la convivència de tràfic de dades IP convencional amb tràfic multimèdia amb requisits exigents de QoS i QoE. A partir de la informació aconseguida en la fase anterior, s'ha desenvolupat una arquitectura de xarxa que millora el rendiment general de la xarxa i el de les transmissions multimèdia d'àudio i vídeo en particular. De forma paral¿lela, s'ha dissenyat i programat un protocol de comunicació que permet implementar el model i testejar el seu funcionament sobre infraestructures de xarxa reals. En l'última fase d'esta tesi s'ha dirigit l'atenció cap a la transmissió multimèdia en les xarxes de sensors sense fil (WSN). Partint dels resultats anteriors, s'ha adaptat tant l'arquitectura com el protocol de comunicacions per a aquest tipus concret de xarxa, l'ús del qual s'ha estés en els últims anys de forma considerable.Díaz Santos, JR. (2016). Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/62162TESI

Datacenter Traffic Control: Understanding Techniques and Trade-offs

Datacenters provide cost-effective and flexible access to scalable compute and storage resources necessary for today's cloud computing needs. A typical datacenter is made up of thousands of servers connected with a large network and usually managed by one operator. To provide quality access to the variety of applications and services hosted on datacenters and maximize performance, it deems necessary to use datacenter networks effectively and efficiently. Datacenter traffic is often a mix of several classes with different priorities and requirements. This includes user-generated interactive traffic, traffic with deadlines, and long-running traffic. To this end, custom transport protocols and traffic management techniques have been developed to improve datacenter network performance. In this tutorial paper, we review the general architecture of datacenter networks, various topologies proposed for them, their traffic properties, general traffic control challenges in datacenters and general traffic control objectives. The purpose of this paper is to bring out the important characteristics of traffic control in datacenters and not to survey all existing solutions (as it is virtually impossible due to massive body of existing research). We hope to provide readers with a wide range of options and factors while considering a variety of traffic control mechanisms. We discuss various characteristics of datacenter traffic control including management schemes, transmission control, traffic shaping, prioritization, load balancing, multipathing, and traffic scheduling. Next, we point to several open challenges as well as new and interesting networking paradigms. At the end of this paper, we briefly review inter-datacenter networks that connect geographically dispersed datacenters which have been receiving increasing attention recently and pose interesting and novel research problems.Comment: Accepted for Publication in IEEE Communications Surveys and Tutorial