End-of-Life and Constant Rate Reliability Modeling for Semiconductor Packages Using Knowledge-Based Test Approaches

End-of-life and constant rate reliability modeling for semiconductor packages are the focuses of this dissertation. Knowledge-based testing approaches are applied and the test-to-failure approach is approved to be a reliable approach. First of all, the end-of-life AF models for solder joint reliability are studied. The research results show using one universal AF model for all packages is flawed approach. An assessment matrix is generated to guide the application of AF models. The AF models chosen should be either assessed based on available data or validated through accelerated stress tests. A common model can be applied if the packages have similar structures and materials. The studies show that different AF models will be required for SnPb solder joints and SAC lead-free solder joints. Second, solder bumps under power cycling conditions are found to follow constant rate reliability models due to variations of the operating conditions. Case studies demonstrate that a constant rate reliability model is appropriate to describe non solder joint related semiconductor package failures as well. Third, the dissertation describes the rate models using Chi-square approach cannot correlate well with the expected failure mechanisms in field applications. The estimation of the upper bound using a Chi-square value from zero failure is flawed. The dissertation emphasizes that the failure data is required for the failure rate estimation. A simple but tighter approach is proposed and provides much tighter bounds in comparison of other approaches available. Last, the reliability of solder bumps in flip chip packages under power cycling conditions is studied. The bump materials and underfill materials will significantly influence the reliability of the solder bumps. A set of comparable bump materials and the underfill materials will dramatically improve the end-of-life solder bumps under power cycling loads, and bump materials are one of the most significant factors. Comparing to the field failure data obtained, the end-of-life model does not predict the failures in the field, which is more close to an approximately constant failure rate. In addition, the studies find an improper underfill material could change the failure location from solder bump cracking to ILD cracking or BGA solder joint failures

Update - Body of Knowledge (BOK) for Copper Wire Bonds

Copper wire bond technology developments continue to be a subject of technical interest to the NASA (National Aeronautics and Space Administration) NEPP (NASA Electronic Parts and Packaging Program) which funded this update. Based on this new research, additional copper bond wire vulnerabilities were found in the literature - Crevice corrosion, intrinsic degradation of palladium coated copper wire, congregation of palladium near ball bond interface leading to failure, residual aluminum pad metallization impact on device lifetimes, stitch cracking phenomena, package delamination's that have resulted in wire bond failures and device failure due to elemental sulfur. A search of the U.S.A. patent web site found 3 noteworthy patents on the following developments: claim of a certain IMC (Intermetallic Compound) thickness as a mitigation solution to chlorine corrosion; claim of using materials with different pHs to neutralize contaminants in a package containing copper wire bonds; and a discussion on ball shear test threshold values for different applications. In addition, an aerospace contractor of military hardware had a presentation on copper bond wires where it was reported that there was a parametric shift and noise susceptibility of devices with copper bond wires which affected legacy design performance. A review of silver bond wire (another emerging technology) technical papers found that an electromigration failure mechanism was evident in device applications that operate under high current conditions. More studies may need to be performed on a comprehensive basis. Research areas for consideration are suggested, however, these research and or qualification/standard test areas are not all inclusive and should not be construed as the element (s) that delivers any potential copper wire bond solution. A false sense of security may occur, whenever there is a reliance on passing any particular qualification, standard, or test protocol

Commercial Off-The-Shelf (COTS) Parts Risk and Reliability User and Application Guide

All COTS parts are not created equal. Because they are not created equal, the notion that one can force the commercial industry to follow a set of military specifications and standards, along with the certifications, audits and qualification commitments that go with them, is unrealistic for the sale of a few parts. The part technologies that are Defense Logistics Agency (DLA) certified or Military Specification (MS) qualified, are several generations behind the state-of-the-art high-performance parts that are required for the compact, higher performing systems for the next generation of spacecraft and instruments. The majority of the part suppliers are focused on the portion of the market that is producing high-tech commercial products and systems. To that end, in order to compete in the high performance and leading edge advanced technological systems, an alternative approach to risk assessment and reliability prediction must be considered

MICROELECTRONIC RELIABILITY MODELS FOR MORE THAN MOORE NANOTECHNOLOGY PRODUCTS

Disruptive technologies face a lack of Reliability Engineering Standards and Physics of Failure (PoF) heritage. Devices based on GaN, SiC, Optoelectronics or Deep-Submicron nanotechnologies or 3D packaging techniques for example are suffering a vital absence of screening methods, qualification and reliability standards when anticipated to be used in Hi-Rel application. To prepare the HiRel industry for just-in-time COTS, reliability engineers must define proper and improved models to guarantee infant mortality free, long term robust equipment that is capable of surviving harsh environments without failure. Furthermore, time-to-market constraints require the shortest possible time for qualification. Breakthroughs technologies are generally industrialized for short life consumer application (typically smartphone or new PCs with less than 3 years lifecycle). How shall we qualify these innovative technologies in long term Hi-Rel equipment operation? More Than Moore law is the paradigm of updating what are now obsolete, inadequate screening methods and reliability models and Standards to meet these demands. A State of the Art overview on Quality Assurance, Reliability Standards and Test Methods is presented in order to question how they must be adapted, harmonized and rearranged. Here, we quantify failure rate models formulated for multiple loads and incorporating multiple failure mechanisms to disentangle existing reliability models to fit the 4.0 industry needs

A Study of Nanometer Semiconductor Scaling Effects on Microelectronics Reliability

The desire to assess the reliability of emerging scaled microelectronics technologies through faster reliability trials and more accurate acceleration models is the precursor for further research and experimentation in this relevant field. The effect of semiconductor scaling on microelectronics product reliability is an important aspect to the high reliability application user. From the perspective of a customer or user, who in many cases must deal with very limited, if any, manufacturer's reliability data to assess the product for a highly-reliable application, product-level testing is critical in the characterization and reliability assessment of advanced nanometer semiconductor scaling effects on microelectronics reliability. This dissertation provides a methodology on how to accomplish this and provides techniques for deriving the expected product-level reliability on commercial memory products. Competing mechanism theory and the multiple failure mechanism model are applied to two separate experiments; scaled SRAM and SDRAM products. Accelerated stress testing at multiple conditions is applied at the product level of several scaled memory products to assess the performance degradation and product reliability. Acceleration models are derived for each case. For several scaled SDRAM products, retention time degradation is studied and two distinct soft error populations are observed with each technology generation: early breakdown, characterized by randomly distributed weak bits with Weibull slope Beta=1, and a main population breakdown with an increasing failure rate. Retention time soft error rates are calculated and a multiple failure mechanism acceleration model with parameters is derived for each technology. Defect densities are calculated and reflect a decreasing trend in the percentage of random defective bits for each successive product generation. A normalized soft error failure rate of the memory data retention time in FIT/Gb and FIT/cm2 for several scaled SDRAM generations is presented revealing a power relationship. General models describing the soft error rates across scaled product generations are presented. The analysis methodology may be applied to other scaled microelectronic products and key parameters

Unreliable Silicon: Circuit through System-Level Techniques for Mitigating the Adverse Effects of Process Variation, Device Degradation and Environmental Conditions.

Designing and manufacturing integrated circuits in advanced, highly-scaled processing technologies that meet stringent specification sets is an increasingly unreliable proposition. Dimensional processing variations, time and stress dependent device degradation and potentially varying environmental conditions exacerbate deviations in performance, power and even functionality of integrated circuits. This work explores a system-level adaptive design philosophy intended to mitigate the power and performance impact of unreliable silicon devices and presents enabling circuits for SRAM variation mitigation and in-situ measurement of device degradation in 130nm and 45nm processing technologies. An adaptation of RAZOR-based DVS designed for on-chip memory power reduction and reliability lifetime improvement enables the elimination of 250 mV of voltage margin in a 1.8V design, with up to 500 mV of reduction when allowing 5% of memory operations to use multiple cycles. A novel PID-controlled dynamic reliability management (DRM) system is presented, allowing user-specified circuit lifetime to be dynamically managed via dynamic voltage and frequency scaling. Peak performance improvement of 20-35% is achievable in typical processing systems by allowing brief periods of elevated voltage operation through the real-time DRM system, while minimizing voltage during non-critical periods of operation to maximize circuit lifetime. A probabilistic analysis of oxide breakdown using the percolation model indicates the need for 1000-2000 integrated in-situ sensors to achieve oxide lifetime prediction error at or under 10%. The conclusions from the oxide analysis are used to guide the design of a series of novel on-chip reliability monitoring circuits for use in a real-time DRM system. A 130nm in-situ oxide breakdown measurement sensor presented is the first published design of an oxide-breakdown oriented circuit and is compatible with standard-cell style automatic “place and route” design styles used in the majority of application specific integrated circuit designs. Measured results show increases in gate oxide leakage of 14-35% after accelerated stress testing. A second generation design of the on-chip oxide degradation sensor is presented that reduces stress mode power consumption by 111,785X over the initial design while providing an ideal 1:1 mapping of gate leakage to output frequency in extracted simulations.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/60701/1/ekarl_1.pd

Algorithms and methodologies for interconnect reliability analysis of integrated circuits

The phenomenal progress of computing devices has been largely made possible by the sustained efforts of semiconductor industry in innovating techniques for extremely large-scale integration. Indeed, gigantically integrated circuits today contain multi-billion interconnects which enable the transistors to talk to each other -all in a space of few mm2. Such aggressively downscaled components (transistors and interconnects) silently suffer from increasing electric fields and impurities/defects during manufacturing. Compounded by the Gigahertz switching, the challenges of reliability and design integrity remains very much alive for chip designers, with Electro migration (EM) being the foremost interconnect reliability challenge. Traditionally, EM containment revolves around EM guidelines, generated at single-component level, whose non-compliance means that the component fails. Failure usually refers to deformation due to EM -manifested in form of resistance increase, which is unacceptable from circuit performance point of view. Subsequent aspects deal with correct-by-construct design of the chip followed by the signoff-verification of EM reliability. Interestingly, chip designs today have reached a dilemma point of reduced margin between the actual and reliably allowed current densities, versus, comparatively scarce system-failures. Consequently, this research is focused on improved algorithms and methodologies for interconnect reliability analysis enabling accurate and design-specific interpretation of EM events. In the first part, we present a new methodology for logic-IP (cell) internal EM verification: an inadequately attended area in the literature. Our SPICE-correlated model helps in evaluating the cell lifetime under any arbitrary reliability speciation, without generating additional data - unlike the traditional approaches. The model is apt for today's fab less eco-system, where there is a) increasing reuse of standard cells optimized for one market condition to another (e.g., wireless to automotive), as well as b) increasing 3rd party content on the chip requiring a rigorous sign-off. We present results from a 28nm production setup, demonstrating significant violations relaxation and flexibility to allow runtime level reliability retargeting. Subsequently, we focus on an important aspect of connecting the individual component-level failures to that of the system failure. We note that existing EM methodologies are based on serial reliability assumption, which deems the entire system to fail as soon as the first component in the system fails. With a highly redundant circuit topology, that of a clock grid, in perspective, we present algorithms for EM assessment, which allow us to incorporate and quantify the benefit from system redundancies. With the skew metric of clock-grid as a failure criterion, we demonstrate that unless such incorporations are done, chip lifetimes are underestimated by over 2x. This component-to-system reliability bridge is further extended through an extreme order statistics based approach, wherein, we demonstrate that system failures can be approximated by an asymptotic kth-component failure model, otherwise requiring costly Monte Carlo simulations. Using such approach, we can efficiently predict a system-criterion based time to failure within existing EDA frameworks. The last part of the research is related to incorporating the impact of global/local process variation on current densities as well as fundamental physical factors on EM. Through Hermite polynomial chaos based approach, we arrive at novel variations-aware current density models, which demonstrate significant margins (> 30 %) in EM lifetime when compared with the traditional worst case approach. The above research problems have been motivated by the decade-long work experience of the author dealing with reliability issues in industrial SoCs, first at Texas Instruments and later at Qualcomm.L'espectacular progrés dels dispositius de càlcul ha estat possible en gran part als esforços de la indústria dels semiconductors en proposar tècniques innovadores per circuits d'una alta escala d'integració. Els circuits integrats contenen milers de milions d'interconnexions que permeten connectar transistors dins d'un espai de pocs mm2. Tots aquests components estan afectats per camps elèctrics, impureses i defectes durant la seva fabricació. Degut a l’activitat a nivell de Gigahertzs, la fiabilitat i integritat són reptes importants pels dissenyadors de xips, on la Electromigració (EM) és un dels problemes més importants. Tradicionalment, el control de la EM ha girat entorn a directrius a nivell de component. L'incompliment d’alguna de les directrius implica un alt risc de falla. Per falla s'entén la degradació deguda a la EM, que es manifesta en forma d'augment de la resistència, la qual cosa és inacceptable des del punt de vista del rendiment del circuit. Altres aspectes tenen a veure amb la correcta construcció del xip i la verificació de fiabilitat abans d’enviar el xip a fabricar. Avui en dia, el disseny s’enfronta a dilemes importants a l’hora de definir els marges de fiabilitat dels xips. És un compromís entre eficiència i fiabilitat. La recerca en aquesta tesi se centra en la proposta d’algorismes i metodologies per a l'anàlisi de la fiabilitat d'interconnexió que permeten una interpretació precisa i específica d'esdeveniments d'EM. A la primera part de la tesi es presenta una nova metodologia pel disseny correcte-per-construcció i verificació d’EM a l’interior de les cel·les lògiques. Es presenta un model SPICE correlat que ajuda a avaluar el temps de vida de les cel·les segons qualsevol especificació arbitrària de fiabilitat i sense generar cap dada addicional, al contrari del que fan altres tècniques. El model és apte per l'ecosistema d'empreses de disseny quan hi ha a) una reutilització creixent de cel·les estàndard optimitzades per unes condicions de mercat i utilitzades en un altre (p.ex. de wireless a automoció), o b) la utilització de components del xip provinents de terceres parts i que necessiten una verificació rigorosa. Es presenten resultats en una tecnologia de 28nm, demostrant relaxacions significatives de les regles de fiabilitat i flexibilitat per permetre la reavaluació de la fiabilitat en temps d'execució. A continuació, el treball tracta un aspecte important sobre la relació entre les falles dels components i les falles del sistema. S'observa que les tècniques existents es basen en la suposició de fiabilitat en sèrie, que porta el sistema a fallar tant aviat hi ha un component que falla. Pensant en topologies redundants, com la de les graelles de rellotge, es proposen algorismes per l'anàlisi d'EM que permeten quantificar els beneficis de la redundància en el sistema. Utilitzant com a mètrica l’esbiaixi del senyal de rellotge, es demostra que la vida dels xips pot arribar a ser infravalorada per un factor de 2x. Aquest pont de fiabilitat entre component i sistema es perfecciona a través d'una tècnica basada en estadístics d'ordre extrem on es demostra que les falles poden ser aproximades amb un model asimptòtic de fallada de l'ièssim component, evitant així simulacions de Monte Carlo costoses. Amb aquesta tècnica, es pot predir eficientment el temps de fallada a nivell de sistema utilitzant eines industrials. La darrera part de la recerca està relacionada amb avaluar l'impacte de les variacions de procés en les densitats de corrent i factors físics de la EM. Mitjançant una tècnica basada en polinomis d'Hermite s'han obtingut uns nous models de densitat de corrent que mostren millores importants (>30%) en l'estimació de la vida del sistema comprades amb les tècniques basades en el cas pitjor. La recerca d'aquesta tesi ha estat motivada pel treball de l'autor durant més d'una dècada tractant temes de fiabilitat en sistemes, primer a Texas Instruments i després a Qualcomm.Postprint (published version

PCB Quality Metrics that Drive Reliability (PD 18)

Risk based technology infusion is a deliberate and systematic process which defines the analysis and communication methodology by which new technology is applied and integrated into existing and new designs, identifies technology development needs based on trends analysis and facilitates the identification of shortfalls against performance objectives. This presentation at IPC Works Asia Aerospace 2019 Events provides the audience a snapshot of quality variations in printed wiring board quality, as assessed, using experiences in processing and risk analysis of PWB structural integrity coupons. The presentation will focus on printed wiring board quality metrics used, the relative type and number of non-conformances observed and trend analysis using statistical methods. Trend analysis shows the top five non-conformances observed across PWB suppliers, the root cause(s) behind these non-conformance and suggestions of mitigation plans. The trends will then be matched with the current state of the PWB supplier base and its challenges and opportunities. The presentation further discusses the risk based SMA approaches and methods being applied at GSFC for evaluating candidate printed wiring board technologies which promote the adoption of higher throughput and faster processing technology for GSFC missions