CAD Tools for Synthesis of Sleep Convention Logic

This dissertation proposes an automated flow for the Sleep Convention Logic (SCL) asynchronous design style. The proposed flow synthesizes synchronous RTL into an SCL netlist. The flow utilizes commercial design tools, while supplementing missing functionality using custom tools. A method for determining the performance bottleneck in an SCL design is proposed. A constraint-driven method to increase the performance of linear SCL pipelines is proposed. Several enhancements to SCL are proposed, including techniques to reduce the number of registers and total sleep capacitance in an SCL design

On board processor system study Final report

Development and characteristics of onboard processor syste

정적 램 및 파워 게이트 회로에 대한 전압 및 보존용 공간 할당 문제

학위논문(박사) -- 서울대학교대학원 : 공과대학 전기·정보공학부, 2021.8. 김태환.칩의 저전력 동작은 중요한 문제이며, 공정이 발전하면서 그 중요성은 점점 커지고 있다. 본 논문은 칩을 구성하는 정적 램(SRAM) 및 로직(logic) 각각에 대해서 저전력으로 동작시키는 방법론을 논한다. 우선, 본 논문에서는 칩을 문턱 전압 근처의 전압(NTV)에서 동작시키고자 할 때 모니터링 회로의 측정을 통해 칩 내의 모든 SRAM 블록에서 동작 실패가 발생하지 않는 최소 동작 전압을 추론하는 방법론을 제안한다. 칩을 NTV 영역에서 동작시키는 것은 에너지 효율성을 증대시킬 수 있는 매우 효과적인 방법 중 하나이지만 SRAM의 경우 동작 실패 때문에 동작 전압을 낮추기 어렵다. 하지만 칩마다 영향을 받는 공정 변이가 다르므로 최소 동작 전압은 칩마다 다르며, 모니터링을 통해 이를 추론해낼 수 있다면 칩별로 SRAM에 서로 다른 전압을 인가해 에너지 효율성을 높일 수 있다. 본 논문에서는 다음과 같은 과정을 통해 이 문제를 해결한다: (1) 디자인 인프라 설계 단계에서는 SRAM의 최소 동작 전압을 추론하고 칩 생산 단계에서는 SRAM 모니터의 측정을 통해 전압을 인가하는 방법론을 제안한다; (2) 칩의 SRAM 비트셀(bitcell)과 주변 회로를 포함한 SRAM 블록들의 공정 변이를 모니터링할 수 있는 SRAM 모니터와 SRAM 모니터에서 모니터링할 대상을 정의한다; (3) SRAM 모니터의 측정값을 이용해 같은 칩에 존재하는 모든 SRAM 블록에서 목표 신뢰수준 내에서 읽기, 쓰기, 및 접근 동작 실패가 발생하지 않는 최소 동작 전압을 추론한다. 벤치마크 회로의 실험 결과는 본 논문에서 제안한 방법을 따라 칩별로 SRAM 블록들의 최소 동작 전압을 다르게 인가할 경우, 기존 방법대로 모든 칩에 동일한 전압을 인가하는 것 대비 수율은 같은 수준으로 유지하면서 SRAM 비트셀 배열의 전력 소모를 감소시킬 수 있음을 보인다. 두 번째로, 본 논문에서는 파워 게이트 회로에서 기존의 보존용 공간 할당 방법들이 지니고 있는 문제를 해결하고 누설 전력 소모를 더 줄일 수 있는 방법론을 제안한다. 기존의 보존용 공간 할당 방법은 멀티플렉서 피드백 루프가 있는 모든 플립플롭에는 무조건 보존용 공간을 할당해야 해야 하기 때문에 다중 비트 보존용 공간의 장점을 충분히 살리지 못하는 문제가 있다. 본 논문에서는 다음과 같은 방법을 통해 보존용 공간을 최소화하는 문제를 해결한다: (1) 보존용 공간 할당 과정에서 멀티플렉서 피드백 루프를 무시할 수 있는 조건을 제시하고, (2) 해당 조건을 이용해 멀티플렉서 피드백 루프가 있는 플립플롭이 많이 존재하는 회로에서 보존용 공간을 최소화한다; (3) 추가로, 플립플롭에 이미 할당된 보존용 공간 중 일부를 제거할 수 있는 조건을 찾고, 이를 이용해 보존용 공간을 더 감소시킨다. 벤치마크 회로의 실험 결과는 본 논문에서 제안한 방법론이 기존의 보존용 공간 할당 방법론보다 더 적은 보존용 공간을 할당하며, 따라서 칩의 면적 및 전력 소모를 감소시킬 수 있음을 보인다.Low power operation of a chip is an important issue, and its importance is increasing as the process technology advances. This dissertation addresses the methodology of operating at low power for each of the SRAM and logic constituting the chip. Firstly, we propose a methodology to infer the minimum operating voltage at which SRAM failure does not occur in all SRAM blocks in the chip operating on near threshold voltage (NTV) regime through the measurement of a monitoring circuit. Operating the chip on NTV regime is one of the most effective ways to increase energy efficiency, but in case of SRAM, it is difficult to lower the operating voltage because of SRAM failure. However, since the process variation on each chip is different, the minimum operating voltage is also different for each chip. If it is possible to infer the minimum operating voltage of SRAM blocks of each chip through monitoring, energy efficiency can be increased by applying different voltage. In this dissertation, we propose a new methodology of resolving this problem. Specifically, (1) we propose to infer minimum operation voltage of SRAM in design infra development phase, and assign the voltage using measurement of SRAM monitor in silicon production phase; (2) we define a SRAM monitor and features to be monitored that can monitor process variation on SRAM blocks including SRAM bitcell and peripheral circuits; (3) we propose a new methodology of inferring minimum operating voltage of SRAM blocks in a chip that does not cause read, write, and access failures under a target confidence level. Through experiments with benchmark circuits, it is confirmed that applying different voltage to SRAM blocks in each chip that inferred by our proposed methodology can save overall power consumption of SRAM bitcell array compared to applying same voltage to SRAM blocks in all chips, while meeting the same yield target. Secondly, we propose a methodology to resolve the problem of the conventional retention storage allocation methods and thereby further reduce leakage power consumption of power gated circuit. Conventional retention storage allocation methods have problem of not fully utilizing the advantage of multi-bit retention storage because of the unavoidable allocation of retention storage on flip-flops with mux-feedback loop. In this dissertation, we propose a new methodology of breaking the bottleneck of minimizing the state retention storage. Specifically, (1) we find a condition that mux-feedback loop can be disregarded during the retention storage allocation; (2) utilizing the condition, we minimize the retention storage of circuits that contain many flip-flops with mux-feedback loop; (3) we find a condition to remove some of the retention storage already allocated to each of flip-flops and propose to further reduce the retention storage. Through experiments with benchmark circuits, it is confirmed that our proposed methodology allocates less retention storage compared to the state-of-the-art methods, occupying less cell area and consuming less power.1 Introduction 1 1.1 Low Voltage SRAM Monitoring Methodology 1 1.2 Retention Storage Allocation on Power Gated Circuit 5 1.3 Contributions of this Dissertation 8 2 SRAM On-Chip Monitoring Methodology for High Yield and Energy Efficient Memory Operation at Near Threshold Voltage 13 2.1 SRAM Failures 13 2.1.1 Read Failure 13 2.1.2 Write Failure 15 2.1.3 Access Failure 16 2.1.4 Hold Failure 16 2.2 SRAM On-chip Monitoring Methodology: Bitcell Variation 18 2.2.1 Overall Flow 18 2.2.2 SRAM Monitor and Monitoring Target 18 2.2.3 Vfail to Vddmin Inference 22 2.3 SRAM On-chip Monitoring Methodology: Peripheral Circuit IR Drop and Variation 29 2.3.1 Consideration of IR Drop 29 2.3.2 Consideration of Peripheral Circuit Variation 30 2.3.3 Vddmin Prediction including Access Failure Prohibition 33 2.4 Experimental Results 41 2.4.1 Vddmin Considering Read and Write Failures 42 2.4.2 Vddmin Considering Read/Write and Access Failures 45 2.4.3 Observation for Practical Use 45 3 Allocation of Always-On State Retention Storage for Power Gated Circuits - Steady State Driven Approach 49 3.1 Motivations and Analysis 49 3.1.1 Impact of Self-loop on Power Gating 49 3.1.2 Circuit Behavior Before Sleeping 52 3.1.3 Wakeup Latency vs. Retention Storage 54 3.2 Steady State Driven Retention Storage Allocation 56 3.2.1 Extracting Steady State Self-loop FFs 57 3.2.2 Allocating State Retention Storage 59 3.2.3 Designing and Optimizing Steady State Monitoring Logic 59 3.2.4 Analysis of the Impact of Steady State Monitoring Time on the Standby Power 63 3.3 Retention Storage Refinement Utilizing Steadiness 65 3.3.1 Extracting Flip-flops for Retention Storage Refinement 66 3.3.2 Designing State Monitoring Logic and Control Signals 68 3.4 Experimental Results 73 3.4.1 Comparison of State Retention Storage 75 3.4.2 Comparison of Power Consumption 79 3.4.3 Impact on Circuit Performance 82 3.4.4 Support for Immediate Power Gating 83 4 Conclusions 89 4.1 Chapter 2 89 4.2 Chapter 3 90박

Design considerations of a nonvolatile accumulator-based 8-bit processor

The rise of the Internet of Things (IoT) and theconstant growth of portable electronics have leveraged the con-cern with energy consumption. Nonvolatile memory (NVM)emerged as a solution to mitigate the problem due to its abilityto retain data on sleep mode without a power supply. Non-volatile processors (NVPs) may further improve energy savingby using nonvolatile flip-flops (NVFFs) to store system state,allowing the device to be turned off when idle and resume ex-ecution instantly after power-on. In view of the potential pre-sented by NVPs, this work describes the initial steps to imple-ment a nonvolatile version of Neander, a hypothetical processorcreated for educational purposes. First, we implemented Ne-ander in Register Transfer Level (RTL), separating the com-binational logic from the sequential elements. Then, the lat-ter was replaced by circuit-level descriptions of volatile flip-flops. We then validated this implementation by employinga mixed-signal simulation over a set of benchmarks. Resultshave shown the expected behavior for the whole instructionset. Then, we implemented circuit-level descriptions of mag-netic tunnel junction (MTJ) based nonvolatile flip-flops, usingan open-source MTJ model. These elements were exhaustivelyvalidated using electrical simulations. With these results, weintend to carry on the implementation and fully equip our pro-cessor with nonvolatile features such as instant wake-up

Robust Circuit Design for Low-Voltage VLSI.

Voltage scaling is an effective way to reduce the overall power consumption, but the major challenges in low voltage operations include performance degradation and reliability issues due to PVT variations. This dissertation discusses three key circuit components that are critical in low-voltage VLSI. Level converters must be a reliable interface between two voltage domains, but the reduced on/off-current ratio makes it extremely difficult to achieve robust conversions at low voltages. Two static designs are proposed: LC2 adopts a novel pulsed-operation and modulates its pull-up strength depending on its state. A 3-sigma robustness is guaranteed using a current margin plot; SLC inherently reduces the contention by diode-insertion. Improvements in performance, power, and robustness are measured from 130nm CMOS test chips. SRAM is a major bottleneck in voltage-scaling due to its inherent ratioed-bitcell design. The proposed 7T SRAM alleviates the area overhead incurred by 8T bitcells and provides robust operation down to 0.32V in 180nm CMOS test chips with 3.35fW/bit leakage. Auto-Shut-Off provides a 6.8x READ energy reduction, and its innate Quasi-Static READ has been demonstrated which shows a much improved READ error rate. A use of PMOS Pass-Gate improves the half-select robustness by directly modulating the device strength through bitline voltage. Clocked sequential elements, flip-flops in short, are ubiquitous in today’s digital systems. The proposed S2CFF is static, single-phase, contention-free, and has the same number of devices as in TGFF. It shows a 40% power reduction as well as robust low-voltage operations in fabricated 45nm SOI test chips. Its simple hold-time path and the 3.4x improvement in 3-sigma hold-time is presented. A new on-chip flip-flop testing harness is also proposed, and measured hold-time variations of flip-flops are presented.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111525/1/yejoong_1.pd

DESIGN OF LOW POWER PULSE TRIGGERED FLIP FLOP USING CONDITIONAL PULSE- ENHANCEMENT SCHEME

Volume 2 Issue 1 (January 2014