A Horst-type Power Divider with Wide Frequency Tuning Range Using Varactors

OAPA This paper presents a novel power divider with a wide frequency tuning range. In our previous work, a pair of capacitors were connected in parallel with the front transmission lines of a Trantanella-type power divider introducing an additional reflection minimum together with the original reflection zero to broaden the bandwidth. In this design, the latter transmission lines are removed. The added capacitors generate a reflection minimum which can be easily controlled by varactors. Thus, the frequency band of the power divider can be flexibly tuned by altering the varactors. Design parameters are carefully chosen to eliminate the effect of the original reflection zero. By doing so, the power divider will have a tunable centre frequency instead of a tunable bandwidth. Theoretical formulas for the characteristic impedances and electrical lengths of the transmission lines of the power divider are derived and analyzed. A power divider has been designed and fabricated to demonstrate the validity of the proposed design. The measured results indicate that the power divider can achieve a frequency tuning range of 0.9-4.2 GHz (fH/fL= 4.67:1), with in-band input and output return losses both better than 22 dB, and an insertion loss of 3.2-4 dB. The measured in-band isolation is better than 15 dB. The power divider has a simple layout and a compact size of 0.2 Ωg ෗ 0.16 Ωg which demonstrates the excellent potential of the proposed power divider for modern communication systems

Design of a compact multifunctional power divider loaded with short-ended stub

The article presents a compact multifunctional power divider loaded with short-ended stub for RF front end system at 2.5 GHz application. The proposed structure consists of PIN diodes and short-ended stub at the output transmission line. Wilkinson power divider and SPDT switch at 2.5 GHz can be achieved by changing the bias voltage of the integrated PIN diodes. As the proposed design transitions from a power divider to an SPDT switch, a short stub is introduced at the output ports to prevent mismatches from occurring. The proposed SPDT switch design has been mathematically analyzed and presented in detail. Two frequency component functions are combined in a small package with three RF connectors. This proposed design is constructed and characterized for experimental-demonstration purposes. The method proposed in this article is simpler compared to the previous work and easy to fabricate. This technique will reduce the overall size and manufacturing cost. It also can be applied to design the multifunctional power divider at any desired specifications and operating frequencies that compatible with RF/microwave applications, such as smart antennas and phase-array antennas

Nouvelles Topologies des diviseurs de puissance, balun et déphaseurs en bandes RF et millimétiques, apport des lignes à ondes lentes

L objectif de cette thèse a été premièrement de réaliser des dispositifs passifs intégrés à base de lignes à onde lentes nommées S-CPW (pour Slow-wave CoPlanar Waveguide ) aux fréquences millimétriques. Plusieurs technologies CMOS ou BiCMOS ont été utilisées: CMOS 65 nm et 28 nm ainsi que BiCMOS 55 nm. Deux baluns, le premier basé sur une topologie de rat-race et le second basé sur un diviseur de puissance de Wilkinson modifié, ainsi qu un inverseur de phase, ont été réalisés et mesurés dans la technologie CMOS 65 nm. Les résultats expérimentaux obtenus se situent à l état de l art en termes de performances électriques. Un coupler hybride et un diviseur de puissance avec des sorties en phase sans isolation ont été conçus en technologie CMOS 28 nm. Les simulations montrent de très bonnes performances pour des dispositifs compacts. Les circuits sont en cours de fabrication et pourront très bientôt être caractérisés. Ensuite, une nouvelle topologie de diviseurs de puissance, avec sorties en phase et isolé a été développée, offrant une grande flexibilité et compacité en comparaison des diviseurs de puissance traditionnels. Cette topologie est parfaitement adaptée pour les technologies silicium. Comme preuve de concept, deux diviseurs de puissance avec des caractéristiques différentes ont été réalisés en technologie PCB microruban à la fréquence de 2.45 GHz. Un composent a été conçu à 60 GHz en technologie BiCMOS 55 nm utilisant des lignes S CPW. Les simulations prouvent que le dispositif est faibles pertes, adapté et isolé. Les circuits sont également en cours de fabrication. Enfin, deux topologies de reflection type phase shifter ont été développées, la première dans la bande RF et la seconde aux fréquences millimétrique. Pour la bande RF, le déphasage atteint plus de 360 avec une figure de mérite très élevée en comparaison avec l état de l art. En ce qui concerne le déphaseur dans la bande millimétrique, la simulation montre un déphasage de 341 avec également une figure de mérite élevée.The first purpose of this work was the use of slow-wave coplanar waveguides (S CPW) to achieve various passive components with the aim to show their great potential and interest at millimetre-waves. Several CMOS or BiCMOS technologies were used: CMOS 65 nm and 28 nm, and BiCMOS 55 nm. Two baluns, one based on a rat-race topology and the other based on a modified Wilkinson power divider, and a phase inverter, were achieved and measured in a 65 nm CMOS technology. State-of-the-art results were achieved. A branch-line coupler and an in phase power divider without isolation were designed in a 28 nm CMOS technology. Really good performances are expected for these compact devices being yet under fabrication. Then, a new topology of in phase and isolated power divider was developed, leading to more flexibility and compactness, well suited to millimetre-wave frequencies. Two power dividers with different characteristics were realized in a PCB technology at 2.45 GHz by using microstrip lines, as a proof-of-concept. After that, a power divider was designed at the working frequency of 60 GHz in the 55 nm BiCMOS technology with S CPWs. The simulation results showed a low loss, full-matched and isolated component, which is also under fabrication and will be characterized as soon as possible. Finally, two new topologies of reflection type phase shifters were presented, one for the RF band and one for the millimetre-wave one. For the one in RF band, the phase shift can reach more than 360 with a great figure-of-merit as compared to the state-of-the-art. Concerning the phase shifter in the millimetre-wave band, the simulation results show a phase shift of 341 with also a high figure-of-merit.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Analytical Approaches to Load Modulation Power Amplifier Design

In future mobile communication networks, there will be a shift toward higher carrier frequencies and highly integrated multiple antenna systems. The system performance will largely depend on the available radio frequency (RF) hardware. As such, RF power amplifiers (PAs) with improved performance, e.g. energy efficiency, are needed. Active load modulation (ALM) is one of the most common PA efficiency enhancement techniques. Unfortunately, different ALM techniques come at the cost of degrading other PA attributes. Through investigation of new ALM design techniques, the overall objective of this thesis is to improve upon different attributes and performance trade-offs in ALM PAs for future wireless systems.\ua0The working principle of ALM PAs is determined by both how the individual transistors are operated and how their outputs are combined. In the first part of the thesis, an analytical approach, where the output combiner is assumed to be an arbitrary black-box, is applied to the Doherty PA. The fundamental interaction between the main and auxiliary transistors is analyzed and generalized. New solutions with improved performance are identified, such as higher gain and an improved efficiency-linearity trade-off. This approach also introduces improved integration possibilities, which are demonstrated by a transmitter where the antenna acts as both the radiator and the Doherty combiner. Additionally, the analytical approach is applied to an isolated two-way power divider. This unlocks many new possibilities, such as improved integration and layout flexibility. \ua0In the second part, one embodiment of the emerging ALM architecture, the load modulated balanced amplifier (LMBA), is proposed: the RF-input Doherty-like LMBA. Design equations are derived and the fundamental operation is studied. This variant presents several advantages over other known architectures, such as higher gain and device periphery scaling of the different transistors.\ua0The third part proposes a new measurement-based ALM PA design procedure, which emulates the full behavior of the transistors in any ALM architecture using active load-pull measurements. This method can predict the intricate behavior in ALM PAs and it gives measurement-based insights into the internal operation of the circuit already at the design stage. This facilitates the design for optimal ALM PA performance. \ua0The thesis contributes with several promising techniques for reducing performance trade-offs and improving the overall performance of ALM PAs. Therefore, the results will contribute to the development of more energy efficient and high capacity wireless services in the future

Bst-inspired Smart Flexible Electronics

The advances in modern communication systems have brought about devices with more functionality, better performance, smaller size, lighter weight and lower cost. Meanwhile, the requirement for newer devices has become more demanding than ever. Tunability and flexibility are both long-desired features. Tunable devices are ‘smart’ in the sense that they can adapt to the dynamic environment or varying user demand as well as correct the minor deviations due to manufacturing fluctuations, therefore making it possible to reduce system complexity and overall cost. It is also desired that electronics be flexible to provide conformability and portability. Previously, tunable devices on flexible substrates have been realized mainly by dicing and assembling. This approach is straightforward and easy to carry out. However, it will become a “mission impossible” when it comes to assembling a large amount of rigid devices on a flexible substrate. Moreover, the operating frequency is often limited by the parasitic effect of the interconnection between the diced device and the rest of the circuit on the flexible substrate. A recent effort utilized a strain-sharing Si/SiGe/Si nanomembrane to transfer a device onto a flexible substrate. This approach works very well for silicon based devices with small dimensions, such as transistors and varactor diodes. Large-scale fabrication capability is still under investigation. A new transfer technique is proposed and studied in this research. Tunable BST (Barium Strontium Titanate) IDCs (inter-digital capacitors) are first fabricated on a silicon substrate. The devices are then transferred onto a flexible LCP (liquid crystalline polymer) substrate using iv wafer bonding of the silicon substrate to the LCP substrate, followed by silicon etching. This approach allows for monolithic fabrication so that the transferred devices can operate in millimeter wave frequency. The tunability, capacitance, Q factor and equivalent circuit are studied. The simulated and measured performances are compared. BST capacitors on LCP substrates are also compared with those on sapphire substrates to prove that this transfer process does not impair the performance. A primary study of a reflectarray antenna unit cell is also conducted for loss and phase swing performance. The BST thin film layout and bias line positions are studied in order to reduce the total loss. Transferring a full-size BST-based reflectarray antenna onto an LCP substrate is the ultimate goal, and this work is ongoing at the University of Central Florida (UCF). HFSS is used to simulate the devices and to prove the concept. All of the devices are fabricated in the clean room at UCF. Probe station measurements and waveguide measurements are performed on the capacitors and reflectarray antenna unit cells respectively. This work is the first comprehensive demonstration of this novel transfer technique

Antenna Design for 5G and Beyond

With the rapid evolution of the wireless communications, fifth-generation (5G) communication has received much attention from both academia and industry, with many reported efforts and research outputs and significant improvements in different aspects, such as data rate speed and resolution, mobility, latency, etc. In some countries, the commercialization of 5G communication has already started as well as initial research of beyond technologies such as 6G.MIMO technology with multiple antennas is a promising technology to obtain the requirements of 5G/6G communications. It can significantly enhance the system capacity and resist multipath fading, and has become a hot spot in the field of wireless communications. This technology is a key component and probably the most established to truly reach the promised transfer data rates of future communication systems. In MIMO systems, multiple antennas are deployed at both the transmitter and receiver sides. The greater number of antennas can make the system more resistant to intentional jamming and interference. Massive MIMO with an especially high number of antennas can reduce energy consumption by targeting signals to individual users utilizing beamforming.Apart from sub-6 GHz frequency bands, 5G/6G devices are also expected to cover millimeter-wave (mmWave) and terahertz (THz) spectra. However, moving to higher bands will bring new challenges and will certainly require careful consideration of the antenna design for smart devices. Compact antennas arranged as conformal, planar, and linear arrays can be employed at different portions of base stations and user equipment to form phased arrays with high gain and directional radiation beams. The objective of this Special Issue is to cover all aspects of antenna designs used in existing or future wireless communication systems. The aim is to highlight recent advances, current trends, and possible future developments of 5G/6G antennas

Antenna Designs for 5G/IoT and Space Applications

This book is intended to shed some light on recent advances in antenna design for these new emerging applications and identify further research areas in this exciting field of communications technologies. Considering the specificity of the operational environment, e.g., huge distance, moving support (satellite), huge temperature drift, small dimension with respect to the distance, etc, antennas, are the fundamental device allowing to maintain a constant interoperability between ground station and satellite, or different satellites. High gain, stable (in temperature, and time) performances, long lifecycle are some of the requirements that necessitates special attention with respect to standard designs. The chapters of this book discuss various aspects of the above-mentioned list presenting the view of the authors. Some of the contributors are working strictly in the field (space), so they have a very targeted view on the subjects, while others with a more academic background, proposes futuristic solutions. We hope that interested reader, will find a fertile source of information, that combined with their interest/background will allow efficiently exploiting the combination of these two perspectives

Antenna Design for 5G and Beyond

This book is a reprint of the Special Issue Antenna Design for 5G and Beyond that was published in Sensors