Energy-aware Dual-path Geographic Routing to Bypass Routing Holes in Wireless Sensor Networks

This is the author accepted manuscript. The final version is available from IEEE via the DOI in this record.Geographic routing has been considered as an attractive approach for resource-constrained wireless sensor networks (WSNs) since it exploits local location information instead of global topology information to route data. However, this routing approach often suffers from the routing hole (i.e., an area free of nodes in the direction closer to destination) in various environments such as buildings and obstacles during data delivery, resulting in route failure. Currently, existing geographic routing protocols tend to walk along only one side of the routing holes to recover the route, thus achieving suboptimal network performance such as longer delivery delay and lower delivery ratio. Furthermore, these protocols cannot guarantee that all packets are delivered in an energy-efficient manner once encountering routing holes. In this paper, we focus on addressing these issues and propose an energy-aware dual-path geographic routing (EDGR) protocol for better route recovery from routing holes. EDGR adaptively utilizes the location information, residual energy, and the characteristics of energy consumption to make routing decisions, and dynamically exploits two node-disjoint anchor lists, passing through two sides of the routing holes, to shift routing path for load balance. Moreover, we extend EDGR into three-dimensional (3D) sensor networks to provide energy-aware routing for routing hole detour. Simulation results demonstrate that EDGR exhibits higher energy efficiency, and has moderate performance improvements on network lifetime, packet delivery ratio, and delivery delay, compared to other geographic routing protocols in WSNs over a variety of communication scenarios passing through routing holes. The proposed EDGR is much applicable to resource-constrained WSNs with routing holes.This work has been partially supported by the National Natural Science Foundation of China (No. 61402343, No. 61672318, No. U1504614, No. 61631013, and No. 61303241), the National Key Research and Development Program (No. 2016YFB1000102), the Natural Science Foundation of Suzhou/Jiangsu Province (No. BK20160385), the EU FP7 QUICK Project (No. PIRSESGA- 2013-612652), and the projects of Tsinghua National Laboratory for Information Science and Technology (TNList)

Literature Review on Hole Detection and Healing in Wireless Sensor Network

Abstract The emerging technology of wireless sensor network (WSN

Review on energy efficient opportunistic routing protocol for underwater wireless sensor networks

Currently, the Underwater Sensor Networks (UWSNs) is mainly an interesting area due to its ability to provide a technology to gather many valuable data from underwater environment such as tsunami monitoring sensor, military tactical application, environmental monitoring and many more. However, UWSNs is suffering from limited energy, high packet loss and the use of acoustic communication. In UWSNs most of the energy consumption is used during the forwarding of packet data from the source to the destination. Therefore, many researchers are eager to design energy efficient routing protocol to minimize energy consumption in UWSNs. As the opportunistic routing (OR) is the most promising method to be used in UWSNs, this paper focuses on the existing proposed energy efficient OR protocol in UWSNs. This paper reviews the existing proposed energy efficient OR protocol, classifying them into 3 categories namely sender-side-based, receiver-side-based and hybrid. Furthermore each of the protocols is reviewed in detail, and its advantages and disadvantages are discussed. Finally, we discuss potential future work research directions in UWSNs, especially for energy efficient OR protocol design

A Survey on Energy Efficient Routing Protocols in Wireless Sensor Networks

Energy efficiency is one of the critical issues in the Wireless Sensor Networks (WSNs), since sensor devices are tiny and integrated with a limited capacity battery. In most of the advanced applications, WSNs operate in very harsh areas and not under supervision of human controls. Routing protocols play a significant role in energy balancing by incorporating the techniques that can reduce control overhead, proper data aggregation method and feasible path selection. It demands a unique requirement due to its frequent topology changes and distributive nature. One of the major concerns in the design of routing protocol in WSNs is efficient energy usage and prolonging Network lifetime. This paper mainly discusses different issues related to energy efficiency in routing protocols of all categories. It incorporates most recent routing protocols which improves the energy efficiency in various application environments. This paper also provides comprehensive details of each protocol which emphasize their principles and explore their advantages and limitations. These protocols belong to different classifications based on Network Structures, communication model, topology and QoS parameters. It also includes more relevant and prominent comparisons with all recent State-of-Art works

Link Quality and Energy Aware Geographical Routing in MANETs using Fuzzy Logics, Journal of Telecommunications and Information Technology, 2016, nr 3

In literature, varieties of topology and geographical routing protocols have been proposed for routing in the MANETs. It is widely accepted that the geographical routings are a superior decision than topological routings. Majority of geographical routing protocols assume an ideal network model and choose the route that contains minimum number of hops. However, in reality, nodes have limited battery power and wireless links are additionally unreliable, so they may highly affect the routing procedure. Thus, for reliable data transmission, condition of the network such as link quality and residual energy must be considered. This paper aims to propose a novel multi-metric geographical routing protocol that considers both links-quality and energy metric along with progress metric to choose the next optimal node. The progress is determined by utilizing greedy as well as compass routing rather than pure greedy routing schemes. To combine these metrics, fuzzy logics are used to get the optimal result. Further, the protocol deals with “hole” problem and proposes a technique to overcome it. Simulations show that the proposed scheme performs better in terms of the packet delivery ratio, throughput and residual energy than other existing protocols

DESIGN OF MOBILE DATA COLLECTOR BASED CLUSTERING ROUTING PROTOCOL FOR WIRELESS SENSOR NETWORKS

Wireless Sensor Networks (WSNs) consisting of hundreds or even thousands of nodes, canbe used for a multitude of applications such as warfare intelligence or to monitor the environment. A typical WSN node has a limited and usually an irreplaceable power source and the efficient use of the available power is of utmost importance to ensure maximum lifetime of eachWSNapplication. Each of the nodes needs to transmit and communicate sensed data to an aggregation point for use by higher layer systems. Data and message transmission among nodes collectively consume the largest amount of energy available in WSNs. The network routing protocols ensure that every message reaches thedestination and has a direct impact on the amount of transmissions to deliver messages successfully. To this end, the transmission protocol within the WSNs should be scalable, adaptable and optimized to consume the least possible amount of energy to suite different network architectures and application domains. The inclusion of mobile nodes in the WSNs deployment proves to be detrimental to protocol performance in terms of nodes energy efficiency and reliable message delivery. This thesis which proposes a novel Mobile Data Collector based clustering routing protocol for WSNs is designed that combines cluster based hierarchical architecture and utilizes three-tier multi-hop routing strategy between cluster heads to base station by the help of Mobile Data Collector (MDC) for inter-cluster communication. In addition, a Mobile Data Collector based routing protocol is compared with Low Energy Adaptive Clustering Hierarchy and A Novel Application Specific Network Protocol for Wireless Sensor Networks routing protocol. The protocol is designed with the following in mind: minimize the energy consumption of sensor nodes, resolve communication holes issues, maintain data reliability, finally reach tradeoff between energy efficiency and latency in terms of End-to-End, and channel access delays. Simulation results have shown that the Mobile Data Collector based clustering routing protocol for WSNs could be easily implemented in environmental applications where energy efficiency of sensor nodes, network lifetime and data reliability are major concerns

Self-organizing Fast Routing Protocols for Underwater Acoustic Communications Networks

To address this problem, in this thesis we propose a cross-layer proactive routing initialization mechanism that does not require additional measurements and, at the same time, is energy efficient. Two routing protocols are proposed: Self-Organized Fast Routing Protocol for Radial Underwater Networks (SOFRP) for radial topology and Self-organized Proactive Routing Protocol for Non-uniformly Deployed Underwater Networks (SPRINT) for a randomly deployed network. SOFRP is based on the algorithm to recreate a radial topology with a gateway node, such that packets always use the shortest possible path from source to sink, thus minimizing consumed energy. Collisions are avoided as much as possible during the path initialization. The algorithm is suitable for 2D or 3D areas, and automatically adapts to a varying number of nodes. In SPRINT the routing path to the gateway is formed on the basis of the distance, measured by the signal strength received. The data sending node prefers to choose the neighbor node which is closest to it. It is designed to achieve high data throughput and low energy consumption of the nodes. There is a tradeoff between the throughput and the energy consumption: more distance needs more transmission energy, and more relay nodes (hops) to the destination node affects the throughput. Each hop increases the packet delay and decreases the throughput. Hence, energy consumption requires nearest nodes to be chosen as forwarding node whereas the throughput requires farthest node to be selected to minimize the number of hops. Fecha de lectura de Tesis Doctoral: 11 mayo 2020Underwater Wireless Sensor Networks (UWSNs) constitute an emerging technology for marine surveillance, natural disaster alert and environmental monitoring. Unlike terrestrial Wireless Sensor Networks (WSNs), electromagnetic waves cannot propagate more than few meters in water (high absorption rate). However, acoustic waves can travel long distances in underwater. Therefore, acoustic waves are preferred for underwater communications, but they travel very slow compare to EM waves (typical speed in water is 1500 m/s against 2x10^8 m/s for EM waves). This physical effect makes a high propagation delay and cannot be avoided, but the end-to-end packet delay it can be reduced. Routing delay is one of the major factors in end-to-end packet delay. In reactive routing protocols, when a packet arrives to a node, the node takes some time to select the node to which the data packet would be forwarded. We may reduce the routing delay for time-critical applications by using proactive routing protocols. Other two critical issues in UWSNs are determining the position of the nodes and time synchronization. Wireless sensor nodes need to determine the position of the surrounding nodes to select the next node in the path to reach the sink node. A Global Navigation Satellite System (GNSS) cannot be used because of the very short underwater range of the GNSS signal. Timestamping to estimate the distance is possible but the limited mobility of the UWSN nodes and variation in the propagation speed of the acoustic waves make the time synchronization a challenging task. For these reasons, terrestrial WSN protocols cannot be readily used for underwater acoustic networks