Competitive power control of distributed power plants

Joint Doctoral Programme in Electric Energy Systems : Universidad de Málaga, Universidad de Sevilla, Universidad del País Vasco y Universitat Politècnica de CatalunyaNowadays, the electrical energy sector is currently found in a dramatic changing paradigm, which moves towards an increasing trend in generating power at distribution levels, where electricity is typically consumed, by means of non-conventional/renewable based generation units. These new generation technologies, termed as distributed generation, not only offers a non-pollutant, cheap and efficient source of energy to cover increasing demand, but also enhance the reliability of supply to critical loads and reduce the need for additional grid reinforcements. Aside of the technical benefits provided, distributed generation will massively integrate renewable energy resources, with new type of loads and end-user actors, such as prosumers, demand responsive loads, or electric vehicles. Where these actors will actively participate in energy and auxiliary service markets, depending on their available or constrained energy needs. For this reason, the work presented in this Thesis deals with designing and implementing advanced hierarchical control solutions to renewable-based power plants with the purpose of achieving advanced grid conection performance while reaching maximum economic benefits from its optimum real-time operation. Initially, an extensive analysis on the main renewable-based power plant hierarchical control solutions currently on the shelf, is performed. This study not only covered the specific case of renewable-based power plants, but also advanced microgrid and smart grid control solutions. Once the main renewable-based power plant hierarchical solutions were analized, a novel Hierarchical Distributed Control Structure (HDCS) is proposed for increased management of renewable-based active distributed plants. This hierarchical control structure comprises all possible functional levels from the higher long-term economic scheduling layer, to the instantaneous supervisory control of the resource, emphasizing the entire operation and control functionalities needed for increasing the integration of active distributed power plants. In order to achieve real-time control capabilities in active distribution systems, the present thesis introduces a novel power sharing control strategy, based on the competitive operation of multiple active participating agents (distributed generators, demand response and energy storage systems) through the implementation of market rules. Such control capabilities are satisfied by applying a price control signal over the entire grid control architecture, being the final-end participating agent, the responsible entity in charge of deciding its own generation/demand involvement based on its marginal or affordable electricity costs. In addition, it reduces the information volume to be transmitted and processing requirements, as the higher control levels do not need to have knowledge on the detailed distribution system topology and contributing actors. In order to have a meaningful evaluation of the proposed competitive control capabilities, a wave power plant application has been selected, which constitutes a challenging scenario for the controller itself to achieve advanced real-time control capabilities in such an oscillating renewable energy resource. In order to suitably characterize the wave energy resource profile resulting from maximum energy absorption, this Thesis introduce a novel adaptive vector controller, which maximizes the energy extraction from the resource regardless of the dominant irregular wave frequency characteristics. For the specific wave power plant application considered, the competitive control does not only ensures real-time optimum resource allocation for satisfying a given production objective, but also provides optimum long term operation of the system. As a result, overall plant costs reductions can be achieved under the competitive operation, since the plant scheduled energy is satisfied by making use of the generation units with cheaper cumulative operation costsActualmente, el sector eléctrico se encuentra inmerso en un profundo proceso de restructuración, donde de cada vez más se tiende a generar energía a nivel de distribución, mediante el uso de generación no convencional/renovable. Estas nuevas tecnologías de generación, referidas como generación distribuida, no proporcionan unicamente una fuente de energía no-contaminante, barata y eficiente para cubrir el incremento de demanda, sinó que también pueden proporcionar seguridad de suministro a cargas críticas, así como reducir la necesidad de expansiones futuras de red. Además de las capacidades técnicas proporcionadas, la generación distribuida hará posible la integración masiva de sistemas de generación renovable, con nuevos tipos de cargas y usuarios finales, como prosumidores, cargas regulables, o vehiculos eléctricos, donde todos estos usuarios participaran activamente en mercados de energía y servicios auxiliares, dependiendo de sus requisitos de uso de energía. Por lo tanto, el trabajo realizado en esta tesis se centra en el diseño e implementación de soluciones jerárquicas de control avanzado en plantas de generación renovable, con el objetivo de obtener un comportamiento harmonioso de intercacción con la red, mientras la operación de la planta maximiza los beneficios derivados de su operación en tiempo real. Inicialmente, se ha llevado a cabo una revisión extensa sobre los sistemas de control jerárquico comunmente implementados en plantas de generación renovable, en microredes y en redes inteligentes. Una vez revisados los principales sistemas de control jerárquico en este tipo de aplicaciones, se propone un una novedosa estructura de control, que cubre todos los niveles de control posibles, desde el más alto nivel de gestión económica, hasta el control detallado del recurso de generación. Para lograr capacidades de control en tiempo real en sistemas activos de distribución, la presente tesis propone una nueva estrategia de control de reparto de potencia, basada en la operación competitiva de múltiples agentes participantes activos (generadores distribuidos, respuesta de demanda y sistemas de almacenamiento de energía) mediante la implementación de reglas del mercado. Dichas capacidades de control se satisfacen aplicando una señal de precio a lo largo de toda la arquitectura de control, siendo el agente de final, el ente responsable de decidir su propia participación en la generación/demanda en función de sus propios costes de electricidad marginales o asumibles. Además, reduce el volumen de información a transmitir y los requisitos de procesamiento de datos, ya que los niveles de control más altos no necesitan tener conocimiento sobre la topología del sistema de distribución detallado ni de la contribución de los actores adyacentes. Para llevar a cabo una evaluación significativa de las capacidades del controlador competitivo propuesto, se ha seleccionado una planta de generación undimotriz, como escenario más desfavorable, ya que el controlador debe asegurar un control estable de la potencia inyectada en un escenario altamente oscilante. Con el fin de caracterizar adecuadamente el perfil de recursos de energía de las olas resultante de la máxima absorción de energía, esta Tesis introduce un nuevo controlador de vector adaptativo, que maximiza la extracción de energía del recurso independientemente de las características dominantes de frecuencia de onda irregular. Para la aplicación de la planta de energía de onda específica considerada, el control competitivo no solo garantiza la asignación óptima de recursos en tiempo real para satisfacer un objetivo de producción dado, sino que también proporciona una operación óptima del sistema a largo plazo. Como resultado, se pueden lograr reducciones generales de los costos de la planta en el marco de la operación competitiva, ya que la energía programada de la planta se satisface haciendo uso de las unidadPostprint (published version

Competitive power control of distributed power plants

Nowadays, the electrical energy sector is currently found in a dramatic changing paradigm, which moves towards an increasing trend in generating power at distribution levels, where electricity is typically consumed, by means of non-conventional/renewable based generation units. These new generation technologies, termed as distributed generation, not only offers a non-pollutant, cheap and efficient source of energy to cover increasing demand, but also enhance the reliability of supply to critical loads and reduce the need for additional grid reinforcements. Aside of the technical benefits provided, distributed generation will massively integrate renewable energy resources, with new type of loads and end-user actors, such as prosumers, demand responsive loads, or electric vehicles. Where these actors will actively participate in energy and auxiliary service markets, depending on their available or constrained energy needs. For this reason, the work presented in this Thesis deals with designing and implementing advanced hierarchical control solutions to renewable-based power plants with the purpose of achieving advanced grid conection performance while reaching maximum economic benefits from its optimum real-time operation. Initially, an extensive analysis on the main renewable-based power plant hierarchical control solutions currently on the shelf, is performed. This study not only covered the specific case of renewable-based power plants, but also advanced microgrid and smart grid control solutions. Once the main renewable-based power plant hierarchical solutions were analized, a novel Hierarchical Distributed Control Structure (HDCS) is proposed for increased management of renewable-based active distributed plants. This hierarchical control structure comprises all possible functional levels from the higher long-term economic scheduling layer, to the instantaneous supervisory control of the resource, emphasizing the entire operation and control functionalities needed for increasing the integration of active distributed power plants. In order to achieve real-time control capabilities in active distribution systems, the present thesis introduces a novel power sharing control strategy, based on the competitive operation of multiple active participating agents (distributed generators, demand response and energy storage systems) through the implementation of market rules. Such control capabilities are satisfied by applying a price control signal over the entire grid control architecture, being the final-end participating agent, the responsible entity in charge of deciding its own generation/demand involvement based on its marginal or affordable electricity costs. In addition, it reduces the information volume to be transmitted and processing requirements, as the higher control levels do not need to have knowledge on the detailed distribution system topology and contributing actors. In order to have a meaningful evaluation of the proposed competitive control capabilities, a wave power plant application has been selected, which constitutes a challenging scenario for the controller itself to achieve advanced real-time control capabilities in such an oscillating renewable energy resource. In order to suitably characterize the wave energy resource profile resulting from maximum energy absorption, this Thesis introduce a novel adaptive vector controller, which maximizes the energy extraction from the resource regardless of the dominant irregular wave frequency characteristics. For the specific wave power plant application considered, the competitive control does not only ensures real-time optimum resource allocation for satisfying a given production objective, but also provides optimum long term operation of the system. As a result, overall plant costs reductions can be achieved under the competitive operation, since the plant scheduled energy is satisfied by making use of the generation units with cheaper cumulative operation costsActualmente, el sector eléctrico se encuentra inmerso en un profundo proceso de restructuración, donde de cada vez más se tiende a generar energía a nivel de distribución, mediante el uso de generación no convencional/renovable. Estas nuevas tecnologías de generación, referidas como generación distribuida, no proporcionan unicamente una fuente de energía no-contaminante, barata y eficiente para cubrir el incremento de demanda, sinó que también pueden proporcionar seguridad de suministro a cargas críticas, así como reducir la necesidad de expansiones futuras de red. Además de las capacidades técnicas proporcionadas, la generación distribuida hará posible la integración masiva de sistemas de generación renovable, con nuevos tipos de cargas y usuarios finales, como prosumidores, cargas regulables, o vehiculos eléctricos, donde todos estos usuarios participaran activamente en mercados de energía y servicios auxiliares, dependiendo de sus requisitos de uso de energía. Por lo tanto, el trabajo realizado en esta tesis se centra en el diseño e implementación de soluciones jerárquicas de control avanzado en plantas de generación renovable, con el objetivo de obtener un comportamiento harmonioso de intercacción con la red, mientras la operación de la planta maximiza los beneficios derivados de su operación en tiempo real. Inicialmente, se ha llevado a cabo una revisión extensa sobre los sistemas de control jerárquico comunmente implementados en plantas de generación renovable, en microredes y en redes inteligentes. Una vez revisados los principales sistemas de control jerárquico en este tipo de aplicaciones, se propone un una novedosa estructura de control, que cubre todos los niveles de control posibles, desde el más alto nivel de gestión económica, hasta el control detallado del recurso de generación. Para lograr capacidades de control en tiempo real en sistemas activos de distribución, la presente tesis propone una nueva estrategia de control de reparto de potencia, basada en la operación competitiva de múltiples agentes participantes activos (generadores distribuidos, respuesta de demanda y sistemas de almacenamiento de energía) mediante la implementación de reglas del mercado. Dichas capacidades de control se satisfacen aplicando una señal de precio a lo largo de toda la arquitectura de control, siendo el agente de final, el ente responsable de decidir su propia participación en la generación/demanda en función de sus propios costes de electricidad marginales o asumibles. Además, reduce el volumen de información a transmitir y los requisitos de procesamiento de datos, ya que los niveles de control más altos no necesitan tener conocimiento sobre la topología del sistema de distribución detallado ni de la contribución de los actores adyacentes. Para llevar a cabo una evaluación significativa de las capacidades del controlador competitivo propuesto, se ha seleccionado una planta de generación undimotriz, como escenario más desfavorable, ya que el controlador debe asegurar un control estable de la potencia inyectada en un escenario altamente oscilante. Con el fin de caracterizar adecuadamente el perfil de recursos de energía de las olas resultante de la máxima absorción de energía, esta Tesis introduce un nuevo controlador de vector adaptativo, que maximiza la extracción de energía del recurso independientemente de las características dominantes de frecuencia de onda irregular. Para la aplicación de la planta de energía de onda específica considerada, el control competitivo no solo garantiza la asignación óptima de recursos en tiempo real para satisfacer un objetivo de producción dado, sino que también proporciona una operación óptima del sistema a largo plazo. Como resultado, se pueden lograr reducciones generales de los costos de la planta en el marco de la operación competitiva, ya que la energía programada de la planta se satisface haciendo uso de las unida

Wind Farms and Flexible Loads Contribution in Automatic Generation Control: An Extensive Review and Simulation

With the increasing integration of wind energy sources into conventional power systems, the demand for reserve power has risen due to associated forecasting errors. Consequently, developing innovative operating strategies for automatic generation control (AGC) has become crucial. These strategies ensure a real-time balance between load and generation while minimizing the reliance on operating reserves from conventional power plant units. Wind farms exhibit a strong interest in participating in AGC operations, especially when AGC is organized into different regulation areas encompassing various generation units. Further, the integration of flexible loads, such as electric vehicles and thermostatically controlled loads, is considered indispensable in modern power systems, which can have the capability to offer ancillary services to the grid through the AGC systems. This study initially presents the fundamental concepts of wind power plants and flexible load units, highlighting their significant contribution to load frequency control (LFC) as an important aspect of AGC. Subsequently, a real-time dynamic dispatch strategy for the AGC model is proposed, integrating reserve power from wind farms and flexible load units. For simulations, a future Pakistan power system model is developed using Dig SILENT Power Factory software (2020 SP3), and the obtained results are presented. The results demonstrate that wind farms and flexible loads can effectively contribute to power-balancing operations. However, given its cost-effectiveness, wind power should be operated at maximum capacity and only be utilized when there is a need to reduce power generation. Additionally, integrating reserves from these sources ensures power system security, reduces dependence on conventional sources, and enhances economic efficiency

Battery energy storage system for aggregated inertia-droop control and a novel frequency dependent state-of-charge recovery

To deal with the technical challenges of renewable energy penetration, this paper focuses on improving the grid voltage and frequency responses in a hybrid renewable energy source integrated power system following load and generation contingency events. A consolidated methodology is proposed to employ a battery energy storage system (BESS) to contribute to voltage regulation through droop-type control and frequency regulation by assimilated inertia emulation (IE) and droop-type control. In addition, a novel frequency-dependent state-of-charge (SOC) recovery (FDSR) is presented to regulate BESS power consumption within the FDSR constraints and recharge the battery during idle periods whenever needed. The efficacy of the proposed BESS controller is demonstrated in an IEEE-9 bus system with a 22.5% photovoltaics (PV) and wind penetration level. The simulation results obtained manifest the satisfactory performance of the proposed controller in regulating simultaneous voltage and frequency in terms of lower rate of change of frequency and better frequency nadir. Furthermore, the proposed FDSR demonstrates its superiority at the time of SOC recovery compared to the conventional approach

Virtual Synchronous Generator Operation of Full Converter Wind Turbine ‒ Control and Testing in a Hardware Based Emulation Platform

Wind is one of the most promising renewable energy forms that can be harvested to into the electrical power system. The installation has been rising worldwide in the past and will continue to steadily increase. The high penetration of wind energy has bought about a number of difficulties to the power system operation due to its stochastic nature, lack of exhibited inertia, and differing responses to the traditional energy sources in grid disturbances. Various grid support functions are then proposed to resolve the issues. One solution is to allow the renewable energy sources to behave like a traditional synchronous generator in the system, as a virtual synchronous generator (VSG). On the other hand, testing the control of the future power grid with high penetration renewable often relies on digital simulation or hardware-based experiments. But they either suffer from fidelity and numerical stability issues, or are bulky and inflexible. A power electronics based power system emulation platform is built in the University of Tennessee. This Hardware Testbed (HTB) allows testing of both system level and component level controls, with a good balance between the fidelity of the hardware-based testing platform, and the coverage of the digital simulation.This dissertation proposal investigates the VSG operation of the full converter wind turbine (FCWT), focusing on its control and testing in the HTB. Specifically, a FCWT emulator was developed using a single converter to include its physical model and control strategies. The existing grid support functions are also included to demonstrate their feasibility.The comprehensive VSG controls are then proposed for a FCWT with short term energy storage. The dynamic response of the FCWT can be comparable to the traditional generation during grid disturbance. The control can also allow the FCWT to be dispatched by the system operator, and even operate stand-alone without other grid sources.To study the system response under faults, a short circuit fault emulator was developed in the HTB platform. Four basic types of the short circuit faults with various fault impedance can be emulated using the emulator. The power system transient stability in terms of critical clearing time can be measured using the developed fault emulator

Electromechanical Dynamics of High Photovoltaic Power Grids

This dissertation study focuses on the impact of high PV penetration on power grid electromechanical dynamics. Several major aspects of power grid electromechanical dynamics are studied under high PV penetration, including frequency response and control, inter-area oscillations, transient rotor angle stability and electromechanical wave propagation.To obtain dynamic models that can reasonably represent future power systems, Chapter One studies the co-optimization of generation and transmission with large-scale wind and solar. The stochastic nature of renewables is considered in the formulation of mixed-integer programming model. Chapter Two presents the development procedures of high PV model and investigates the impact of high PV penetration on frequency responses. Chapter Three studies the impact of PV penetration on inter-area oscillations of the U.S. Eastern Interconnection system. Chapter Four presents the impacts of high PV on other electromechanical dynamic issues, including transient rotor angle stability and electromechanical wave propagation. Chapter Five investigates the frequency response enhancement by conventional resources. Chapter Six explores system frequency response improvement through real power control of wind and PV. For improving situation awareness and frequency control, Chapter Seven studies disturbance location determination based on electromechanical wave propagation. In addition, a new method is developed to generate the electromechanical wave propagation speed map, which is useful to detect system inertia distribution change. Chapter Eight provides a review on power grid data architectures for monitoring and controlling power grids. Challenges and essential elements of data architecture are analyzed to identify various requirements for operating high-renewable power grids and a conceptual data architecture is proposed. Conclusions of this dissertation study are given in Chapter Nine

Modelling and Simulation of Electrical Energy Systems through a Complex Systems Approach using Agent-Based Models

Complexity science aims to better understand the processes of both natural and man-made systems which are composed of many interacting entities at different scales. A disaggregated approach is proposed for simulating electricity systems, by using agent-based models coupled to continuous ones. The approach can help in acquiring a better understanding of the operation of the system itself, e.g. on emergent phenomena or scale effects; as well as in the improvement and design of future smart grids

Physics-Based and Data-Driven Analytics for Enhanced Planning and Operations in Power Systems with Deep Renewable Penetration

This dissertation is motivated by the lack of combined physics-based and data-driven framework for solving power system challenges that are introduced by the integration of new devices and new system components. As increasing number of stochastic generation, responsive loads, and dynamic measurements are involved in the planning and operations of modern power systems, utilities and system operators are in great need of new analysis framework that could combine physical models and measuring data together for solving challenging planning and operational problems. In view of the above challenges, the high-level objective of this dissertation is to develop a framework for integrating measurement data into large physical systems modeled by dynamical equations. To this end, the dissertation first identifies four critical tasks for the planning and operations of the modern power systems: the data collection and pre-processing, the system situational awareness, the decision making process, as well as the post-event analysis. The dissertation then takes one concrete application in each of these critical tasks as the example, and proposes the physics-based/data-driven approach for solving the challenging problems faced by this specific application. To this end, this dissertation focuses on solving the following specific problems using physics-based/data-driven approaches. First, for the data collection and pre-processing platform, a purely data-driven approach is proposed to detect bad metering data in the phasor measurement unit (PMU) monitoring systems, and ensure the overall PMU data quality. Second, for the situational awareness platform, a physics-based voltage stability assessment method is presented to improve the situational awareness of system voltage instabilities. Third, for the decision making platform, a combined physics-based and data-driven framework is proposed to support the decision making process of PMU-based power plant model validation. Forth, for the post-event analysis platform, a physics-based post-event analysis is presented to identify the root causes of the sub-synchronous oscillations induced by the wind farm integration. The above problems and proposed solutions are discussed in detail in Section 2 through Section 5. The results of this work can be integrated to address practical problems in modern power system planning and operations

New contributions to frequency control based on virtual synchronous generators: application to power systems with high renewable energy sources integration

[SPA] Esta tesis doctoral se presenta bajo la modalidad de compendio de publicaciones. Tradicionalmente, servicios como la regulación y mantenimiento de la frecuencia de los sistemas eléctricos, cobertura de la demanda eléctrica o la existencia de las reservas rodantes (spinning reserves) han sido suministrados y asegurados por las fuentes de generación de energía eléctrica tradicionales. Sin embargo, los sistemas eléctricos han sufrido una serie de cambios en los últimos años que están afectando de manera directa al propio funcionamiento de los mismos. Por un lado, el aumento constante del consumo de energía y de la intensidad del propio uso energético, unido al aumento de las restricciones legislativas medioambientales, y por otro el concepto de la energía eléctrica como un producto comercial junto con la liberalización de los mercados energéticos, hacen que se tambaleen algunas de las premisas hasta ahora asumidas. En este sentido, y en un entorno de promoción de recursos renovables, hace que los servicios hasta ahora proporcionados sólo por la generación clásica deben también ser compartidos por todos los puntos de generación. No obstante, la alta penetración de este tipo de fuentes renovables en el sector eléctrico acarrea una seria de cuestiones derivadas de sus características y peculiaridades que es necesario abordar antes de proceder de manera masiva a su integración y, por tanto, a la independencia de la generación convencional. Adicionalmente, y debido a la naturaleza variable de la generación renovable (principalmente el viento y el sol) recobra mayor importancia el asegurar por parte de los organismos reguladores una reserva energética que permita actuar de manera eficiente y fiel en casos de desequilibrio de potencias. En este nuevo escenario, en el que el director de tesis ha trabajado a lo largo de la última década, se hace necesario contar con el desarrollo y adaptación de nuevas herramientas y soluciones que faciliten la integración de fuentes renovables sin que ello suponga una merma en las capacidades del sistema eléctrico en términos de estabilidad y de respuesta ante contingencias. Así pues, el objetivo principal de esta tesis consiste en el estudio, implementación y evaluación de sistemas eléctricos con alta penetración de recurso eólico y fotovoltaico con el fin de evaluar posibles soluciones para emular inercias virtuales y respuestas similares a las que se obtendrían con generación clásica, integrando así de manera efectiva el recurso renovable al control de la frecuencia del sistema eléctrico. En este escenario, resultaría crucial poder aliviar en parte las necesidades de almacenamiento de energía a los puntos de generación mediante la implementación de estrategias alternativas de control de respuesta ante excursiones de frecuencia en las unidades renovables, aportando éstas el apoyo necesario para mantener la frecuencia de red dentro de los límites establecidos. Por tanto, la solución aquí estudiada favorecería la integración masiva de recursos renovables, dentro de un escenario de estabilidad del sistema eléctrico apoyado por estas instalaciones, y donde la eliminación paulatina de elementos rotativos directamente conectados a la red debe sustituirse y/o emularse de manera que el sistema eléctrico ofrezca la misma fiabilidad que se percibe ante la presencia de generación convencional. Sólo así se conseguirá fomentar de manera argumentada las posibilidades tangibles de integración a gran escala de recursos renovables, adelantándonos a las necesidades que surgirán de manera inevitable como consecuencia de la disminución inicial de inercia del sistema (entendida de una manera clásica como elementos rotativos directamente conectados a red) y como consecuencia de la entrada de fuentes que poseen una variabilidad en sus niveles de generación. Destacar igualmente la importancia cada vez mayor del control de la frecuencia del sistema eléctrico, debido a la sensibilidad y dependencia que poseen de este parámetro la mayoría de las cargas y equipos con algún tipo de etapa de electrónica de potencia.[ENG] This doctoral dissertation has been presented in the form of thesis by publication. Over the last decades, most countries have been suffering an electrical energy transition, changing from a model based on non-renewable sources (mainly based on fossil fuels), to a new framework characterised by the integration of renewable energy resources (RES). These important changes have been mainly supported by the development of power electronics, environmental protection policies, and the need to reduce energy dependence on third countries. Moreover, the electrical sector stands out because of the diversity and heterogeneity of sources that can generate electricity. As a result, the current electrical scenario includes a high interest in the integration of variable renewable energy sources (vRES) shifting towards a new generation mix. In fact, these vRES (mainly photovoltaic and wind power installations) already play a relevant role, as some European countries have experienced generation levels over 50% during some time-periods of last years. As aforementioned, the two most mature renewable resources integrated into power systems are solar photovoltaic (PV) and wind power (especially variable speed wind turbines, VSWTs). Together with the integration of these two sources, and in contrast to traditional grids based on conventional power plants (i.e., hydro-power, thermal, and nuclear power plants), several important issues have emerged, needing to be analysed, assessed, and resolved.Los artículos que constituyen la tesis son los siguientes: 1. Fernández-Guillamón, Ana & Gómez-Lázaro, Emilio & Muljadi, Eduard & Molina-García, Ángel, 2019. "Power systems with high renewable energy sources: A review of inertia and frequency control strategies over time," Renewable and Sustainable Energy Reviews, Elsevier, vol. 115(C). 2. Ana Fernández-Guillamón & Jorge Villena-Lapaz & Antonio Vigueras-Rodríguez & Tania García-Sánchez & Ángel Molina-García, 2018. "An Adaptive Frequency Strategy for Variable Speed Wind Turbines: Application to High Wind Integration Into Power Systems,"Energies, MDPI, Open Access Journal, vol. 11(6), pages 1-21, June. 3. Fernández-Guillamón, A.; Vigueras-Rodríguez, A.; Gómez-Lázaro, E.; Molina-García, Á. Fast Power Reserve Emulation Strategy for VSWT Supporting Frequency Control in Multi-Area Power Systems. Energies 2018, 11, 2775. https://doi.org/10.3390/en11102775. 4. Fernández-Guillamón, Ana & Sarasúa, José & Chazarra, Manuel & Vigueras-Rodríguez, Antonio & Fernández-Muñoz, Daniel & Molina-Garcia, Ángel. (2020). Frequency control analysis based on unit commitment schemes with high wind power integration: A Spanish isolated power system case study. International Journal of Electrical Power & Energy Systems. 121. 106044. 10.1016/j.ijepes.2020.106044. 5. Fernández‐Guillamón, A., Vigueras‐Rodríguez, A. and Molina‐García, Á. (2019), Analysis of power system inertia estimation in high wind power plant integration scenarios. IET Renewable Power Generation, 13: 2807-2816. https://doi.org/10.1049/iet-rpg.2019.0220. 6. Fernández Guillamón, Ana; Martínez de Lucas, Guillermo; Molina García, Ángel y Sarasúa Moreno, José Ignacio (2020). An Adaptive Control Scheme for Variable Speed Wind Turbines Providing Frequency Regulation in Isolated Power Systems with Thermal Generation."Energies", v. 13 (n. 13); p. 3369. ISSN 1996-1073. https://doi.org/10.3390/en13133369. 7. Fernández-Guillamón, A.; Martínez-Lucas, G.; Molina-García, Á.; Sarasua, J.-I. Hybrid Wind–PV Frequency Control Strategy under Variable Weather Conditions in Isolated Power Systems. Sustainability 2020, 12, 7750. https://doi.org/10.3390/su12187750. 8. Fernández-Guillamón, Ana & Gomez-Lazaro, Emilio & Molina-Garcia, Ángel. (2020). Extensive frequency response and inertia analysis under high renewable energy source integration scenarios: application to the European interconnected power system.Escuela Internacional de Doctorado de la Universidad Politécnica de CartagenaUniversidad Politécnica de CartagenaPrograma de Doctorado en Energías Renovables y Eficiencia Energétic