Low power techniques for video compression

This paper gives an overview of low-power techniques proposed in the literature for mobile multimedia and Internet applications. Exploitable aspects are discussed in the behavior of different video compression tools. These power-efficient solutions are then classified by synthesis domain and level of abstraction. As this paper is meant to be a starting point for further research in the area, a lowpower hardware & software co-design methodology is outlined in the end as a possible scenario for video-codec-on-a-chip implementations on future mobile multimedia platforms

The ARIEL Instrument Control Unit design for the M4 Mission Selection Review of the ESA's Cosmic Vision Program

The Atmospheric Remote-sensing Infrared Exoplanet Large-survey mission (ARIEL) is one of the three present candidates for the ESA M4 (the fourth medium mission) launch opportunity. The proposed Payload will perform a large unbiased spectroscopic survey from space concerning the nature of exoplanets atmospheres and their interiors to determine the key factors affecting the formation and evolution of planetary systems. ARIEL will observe a large number (>500) of warm and hot transiting gas giants, Neptunes and super-Earths around a wide range of host star types, targeting planets hotter than 600 K to take advantage of their well-mixed atmospheres. It will exploit primary and secondary transits spectroscopy in the 1.2-8 um spectral range and broad-band photometry in the optical and Near IR (NIR). The main instrument of the ARIEL Payload is the IR Spectrometer (AIRS) providing low-resolution spectroscopy in two IR channels: Channel 0 (CH0) for the 1.95-3.90 um band and Channel 1 (CH1) for the 3.90-7.80 um range. It is located at the intermediate focal plane of the telescope and common optical system and it hosts two IR sensors and two cold front-end electronics (CFEE) for detectors readout, a well defined process calibrated for the selected target brightness and driven by the Payload's Instrument Control Unit (ICU).Comment: Experimental Astronomy, Special Issue on ARIEL, (2017

Performance analysis of a hardware accelerator of dependence management for taskbased dataflow programming models

Along with the popularity of multicore and manycore, task-based dataflow programming models obtain great attention for being able to extract high parallelism from applications without exposing the complexity to programmers. One of these pioneers is the OpenMP Superscalar (OmpSs). By implementing dynamic task dependence analysis, dataflow scheduling and out-of-order execution in runtime, OmpSs achieves high performance using coarse and medium granularity tasks. In theory, for the same application, the more parallel tasks can be exposed, the higher possible speedup can be achieved. Yet this factor is limited by task granularity, up to a point where the runtime overhead outweighs the performance increase and slows down the application. To overcome this handicap, Picos was proposed to support task-based dataflow programming models like OmpSs as a fast hardware accelerator for fine-grained task and dependence management, and a simulator was developed to perform design space exploration. This paper presents the very first functional hardware prototype inspired by Picos. An embedded system based on a Zynq 7000 All-Programmable SoC is developed to study its capabilities and possible bottlenecks. Initial scalability and hardware consumption studies of different Picos designs are performed to find the one with the highest performance and lowest hardware cost. A further thorough performance study is employed on both the prototype with the most balanced configuration and the OmpSs software-only alternative. Results show that our OmpSs runtime hardware support significantly outperforms the software-only implementation currently available in the runtime system for finegrained tasks.This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272) and by the European Research Council RoMoL Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations.Peer ReviewedPostprint (published version

HW/SW mechanisms for instruction fusion, issue and commit in modern u-processors

In this thesis we have explored the co-designed paradigm to show alternative processor design points. Specifically, we have provided HW/SW mechanisms for instruction fusion, issue and commit for modern processors. We have implemented a co-designed virtual machine monitor that binary translates x86 instructions into RISC like micro-ops. Moreover, the translations are stored as superblocks, which are a trace of basic blocks. These superblocks are further optimized using speculative and non-speculative optimizations. Hardware mechanisms exists in-order to take corrective action in case of misspeculations. During the course of this PhD we have made following contributions. Firstly, we have provided a novel Programmable Functional unit, in-order to speed up general-purpose applications. The PFU consists of a grid of functional units, similar to CCA, and a distributed internal register file. The inputs of the macro-op are brought from the Physical Register File to the internal register file using a set of moves and a set of loads. A macro-op fusion algorithm fuses micro-ops at runtime. The fusion algorithm is based on a scheduling step that indicates whether the current fused instruction is beneficial or not. The micro-ops corresponding to the macro-ops are stored as control signals in a configuration. The macro-op consists of a configuration ID which helps in locating the configurations. A small configuration cache is present inside the Programmable Functional unit, that holds these configurations. In case of a miss in the configuration cache configurations are loaded from I-Cache. Moreover, in-order to support bulk commit of atomic superblocks that are larger than the ROB we have proposed a speculative commit mechanism. For this we have proposed a Speculative commit register map table that holds the mappings of the speculatively committed instructions. When all the instructions of the superblock have committed the speculative state is copied to Backend Register Rename Table. Secondly, we proposed a co-designed in-order processor with with two kinds of accelerators. These FU based accelerators run a pair of fused instructions. We have considered two kinds of instruction fusion. First, we fused a pair of independent loads together into vector loads and execute them on vector load units. For the second kind of instruction fusion we have fused a pair of dependent simple ALU instructions and execute them in Interlock Collapsing ALUs (ICALU). Moreover, we have evaluated performance of various code optimizations such as list-scheduling, load-store telescoping and load hoisting among others. We have compared our co-designed processor with small instruction window out-of-order processors. Thirdly, we have proposed a co-designed out-of-order processor. Specifically we have reduced complexity in two areas. First of all, we have co-designed the commit mechanism, that enable bulk commit of atomic superblocks. In this solution we got rid of the conventional ROB, instead we introduce the Superblock Ordering Buffer (SOB). SOB ensures program order is maintained at the granularity of the superblock, by bulk committing the program state. The program state consists of the register state and the memory state. The register state is held in a per superblock register map table, whereas the memory state is held in gated store buffer and updated in bulk. Furthermore, we have tackled the complexity of Out-of-Order issue logic by using FIFOs. We have proposed an enhanced steering heuristic that fixes the inefficiencies of the existing dependence-based heuristic. Moreover, a mechanism to release the FIFO entries earlier is also proposed that further improves the performance of the steering heuristic.En aquesta tesis hem explorat el paradigma de les màquines issue i commit per processadors actuals. Hem implementat una màquina virtual que tradueix binaris x86 a micro-ops de tipus RISC. Aquestes traduccions es guarden com a superblocks, que en realitat no és més que una traça de virtuals co-dissenyades. En particular, hem proposat mecanismes hw/sw per a la fusió d’instruccions, blocs bàsics. Aquests superblocks s’optimitzen utilitzant optimizacions especualtives i d’altres no speculatives. En cas de les optimizations especulatives es consideren mecanismes per a la gestió de errades en l’especulació. Al llarg d’aquesta tesis s’han fet les següents contribucions: Primer, hem proposat una nova unitat functional programmable (PFU) per tal de millorar l’execució d’aplicacions de proposit general. La PFU està formada per un conjunt d’unitats funcionals, similar al CCA, amb un banc de registres intern a la PFU distribuït a les unitats funcionals que la composen. Les entrades de la macro-operació que s’executa en la PFU es mouen del banc de registres físic convencional al intern fent servir un conjunt de moves i loads. Un algorisme de fusió combina més micro-operacions en temps d’execució. Aquest algorisme es basa en un pas de planificació que mesura el benefici de les decisions de fusió. Les micro operacions corresponents a la macro operació s’emmagatzemen com a senyals de control en una configuració. Les macro-operacions tenen associat un identificador de configuració que ajuda a localitzar d’aquestes. Una petita cache de configuracions està present dintre de la PFU per tal de guardar-les. En cas de que la configuració no estigui a la cache, les configuracions es carreguen de la cache d’instruccions. Per altre banda, per tal de donar support al commit atòmic dels superblocks que sobrepassen el tamany del ROB s’ha proposat un mecanisme de commit especulatiu. Per aquest mecanisme hem proposat una taula de mapeig especulativa dels registres, que es copia a la taula no especulativa quan totes les instruccions del superblock han comitejat. Segon, hem proposat un processador en order co-dissenyat que combina dos tipus d’acceleradors. Aquests acceleradors executen un parell d’instruccions fusionades. S’han considerat dos tipus de fusió d’instructions. Primer, combinem un parell de loads independents formant loads vectorials i els executem en una unitat vectorial. Segon, fusionem parells d’instruccions simples d’alu que són dependents i que s’executaran en una Interlock Collapsing ALU (ICALU). Per altra aquestes tecniques les hem evaluat conjuntament amb diverses optimizacions com list scheduling, load-store telescoping i hoisting de loads, entre d’altres. Aquesta proposta ha estat comparada amb un processador fora d’ordre. Tercer, hem proposat un processador fora d’ordre co-dissenyat efficient reduint-ne la complexitat en dos areas principals. En primer lloc, hem co-disenyat el mecanisme de commit per tal de permetre un eficient commit atòmic del superblocks. En aquesta solució hem substituït el ROB convencional, i en lloc hem introduït el Superblock Ordering Buffer (SOB). El SOB manté l’odre de programa a granularitat de superblock. L’estat del programa consisteix en registres i memòria. L’estat dels registres es manté en una taula per superblock, mentre que l’estat de memòria es guarda en un buffer i s’actulitza atòmicament. La segona gran area de reducció de complexitat considerarada és l’ús de FIFOs a la lògica d’issue. En aquest últim àmbit hem proposat una heurística de distribució que solventa les ineficiències de l’heurística basada en dependències anteriorment proposada. Finalment, i junt amb les FIFOs, s’ha proposat un mecanisme per alliberar les entrades de la FIFO anticipadament

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

Speed reading in the dark : Accelerating functional encryption for quadratic functions with reprogrammable hardware

Functional encryption is a new paradigm for encryption where decryption does not give the entire plaintext but only some function of it. Functional encryption has great potential in privacy-enhancing technologies but suffers from excessive computational overheads. We introduce the first hardware accelerator that supports functional encryption for quadratic functions. Our accelerator is implemented on a reprogrammable system-on-chip following the hardware/software codesign methogol-ogy. We benchmark our implementation for two privacy-preserving machine learning applications: (1) classification of handwritten digits from the MNIST database and (2) classification of clothes images from the Fashion MNIST database. In both cases, classification is performed with encrypted images. We show that our implementation offers speedups of over 200 times compared to a published software implementation and permits applications which are unfeasible with software-only solutions.Peer reviewe