Optimisation of Mobile Communication Networks - OMCO NET

The mini conference “Optimisation of Mobile Communication Networks” focuses on advanced methods for search and optimisation applied to wireless communication networks. It is sponsored by Research & Enterprise Fund Southampton Solent University. The conference strives to widen knowledge on advanced search methods capable of optimisation of wireless communications networks. The aim is to provide a forum for exchange of recent knowledge, new ideas and trends in this progressive and challenging area. The conference will popularise new successful approaches on resolving hard tasks such as minimisation of transmit power, cooperative and optimal routing

Simplified decoding techniques for linear block codes

Error correcting codes are combinatorial objects, designed to enable reliable transmission of digital data over noisy channels. They are ubiquitously used in communication, data storage etc. Error correction allows reconstruction of the original data from received word. The classical decoding algorithms are constrained to output just one codeword. However, in the late 50’s researchers proposed a relaxed error correction model for potentially large error rates known as list decoding. The research presented in this thesis focuses on reducing the computational effort and enhancing the efficiency of decoding algorithms for several codes from algorithmic as well as architectural standpoint. The codes in consideration are linear block codes closely related to Reed Solomon (RS) codes. A high speed low complexity algorithm and architecture are presented for encoding and decoding RS codes based on evaluation. The implementation results show that the hardware resources and the total execution time are significantly reduced as compared to the classical decoder. The evaluation based encoding and decoding schemes are modified and extended for shortened RS codes and software implementation shows substantial reduction in memory footprint at the expense of latency. Hermitian codes can be seen as concatenated RS codes and are much longer than RS codes over the same aphabet. A fast, novel and efficient VLSI architecture for Hermitian codes is proposed based on interpolation decoding. The proposed architecture is proven to have better than Kötter’s decoder for high rate codes. The thesis work also explores a method of constructing optimal codes by computing the subfield subcodes of Generalized Toric (GT) codes that is a natural extension of RS codes over several dimensions. The polynomial generators or evaluation polynomials for subfield-subcodes of GT codes are identified based on which dimension and bound for the minimum distance are computed. The algebraic structure for the polynomials evaluating to subfield is used to simplify the list decoding algorithm for BCH codes. Finally, an efficient and novel approach is proposed for exploiting powerful codes having complex decoding but simple encoding scheme (comparable to RS codes) for multihop wireless sensor network (WSN) applications

Lightweight cryptographic protocols for mobile devices

Title from PDF of title page viewed June 30, 2020Dissertation advisor: Lein HarnIncludes bibliographical references (pages 146-163)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City. 2020In recent years, a wide range of resource-constrained devices have been built and integrated into many networked systems. These devices collect and transfer data over the Internet in order for users to access the data or to control these devices remotely. However, the data also may contain sensitive information such as medical records or credit card numbers. This underscores the importance of protecting potentially sensitive data before it is transferred over the network. To provide security services such as data confidentiality and authentication, these devices must be provided with cryptographic keys to encrypt the data. Designing security schemes for resource-limited devices is a challenging task due to the inherit characteristics of these devices which are limited memory, processing power and battery life. In this dissertation, we propose lightweight polynomial-based cryptographic protocols in three environments that encompass resource-constrained devices which are Wireless Sensor Network (WSN), Fog Computing, and Blockchain Network. With polynomial-based schemes, we guarantee high network connectivity due to the existence of a shared pairwise key between every pair of nodes in the network. More importantly, the proposed schemes are lightweight which means they exhibit low memory, processing and communication overheads for resource-constrained devices compared with other schemes. The only problem with polynomial-based schemes is that they suffer from node-captured attacks. That is, when an attacker captured a specific number of nodes, the attacker could compromise the security of the whole network. In this dissertation, we propose, for the first time, polynomial-based schemes with probabilistic security in WSNs. That is, when the attacker captured a specific number of sensor nodes, there is a low probability the attacker could compromised the security of the whole network. We show how we can modify system’s parameters to lower such attacks.Introduction -- Overview of cryptographical key distribution schemes -- Related work -- Wireless Sensor Networks (WSNS) -- Fog computing -- Blockchain Networks -- Conclusion and future wor

Privacy preservation in Internet of Things: a secure approach for distributed group authentication through Paillier cryptosystem

Ho creato un applicativo in java per l'autenticazione distribuita di gruppo in ambienti con risorse limitate come Internet of things. L'applicativo è stato testato su una rete MANET da 2 a 5 nodi

Key management for wireless sensor network security

Wireless Sensor Networks (WSNs) have attracted great attention not only in industry but also in academia due to their enormous application potential and unique security challenges. A typical sensor network can be seen as a combination of a number of low-cost sensor nodes which have very limited computation and communication capability, memory space, and energy supply. The nodes are self-organized into a network to sense or monitor surrounding information in an unattended environment, while the self-organization property makes the networks vulnerable to various attacks.Many cryptographic mechanisms that solve network security problems rely directly on secure and efficient key management making key management a fundamental research topic in the field of WSNs security. Although key management for WSNs has been studied over the last years, the majority of the literature has focused on some assumed vulnerabilities along with corresponding countermeasures. Specific application, which is an important factor in determining the feasibility of the scheme, has been overlooked to a large extent in the existing literature.This thesis is an effort to develop a key management framework and specific schemes for WSNs by which different types of keys can be established and also can be distributed in a self-healing manner; explicit/ implicit authentication can be integrated according to the security requirements of expected applications. The proposed solutions would provide reliable and robust security infrastructure for facilitating secure communications in WSNs.There are five main parts in the thesis. In Part I, we begin with an introduction to the research background, problems definition and overview of existing solutions. From Part II to Part IV, we propose specific solutions, including purely Symmetric Key Cryptography based solutions, purely Public Key Cryptography based solutions, and a hybrid solution. While there is always a trade-off between security and performance, analysis and experimental results prove that each proposed solution can achieve the expected security aims with acceptable overheads for some specific applications. Finally, we recapitulate the main contribution of our work and identify future research directions in Part V

Sécurité collaborative pour l internet des objets

Cette thèse aborde des nouveaux défis de sécurité dans l'Internet des Objets (IdO). La transition actuelle de l'Internet classique vers l'Internet des Objets conduit à de nombreux changements dans les modèles de communications sous-jacents. La nature hétérogène des communications de l IdO et le déséquilibre entre les capacités des entités communicantes qui le constituent rendent difficile l'établissement de connexions sécurisées de bout en bout. Contrairement aux nœuds de l Internet traditionnel, la plupart des composants de l'Internet des Objets sont en effet caractérisés par de faibles capacités en termes d'énergie et de puissance calcul. Par conséquent, ils ne sont pas en mesure de supporter des systèmes de sécurité complexes. En particulier, la mise en place d'un canal de communication sécurisé de bout en bout nécessite l établissement d'une clé secrète commune entre les deux nœuds souhaitant communiquer, qui sera négociée en s'appuyant sur un protocole d'échange de clés tels que le Transport Layer Security (TLS) Handshake ou l Internet Key Exchange (IKE). Or, une utilisation directe de ces protocoles pour établir des connexions sécurisées entre deux entités de l IdO peut être difficile en raison de l'écart technologique entre celles-ci et des incohérences qui en résultent sur le plan des primitives cryptographiques supportées. Le sujet de l'adaptation des protocoles de sécurité existants pour répondre à ces nouveaux défis a récemment été soulevé dans la communauté scientifique. Cependant, les premières solutions proposées n'ont pas réussi à répondre aux besoins des nœuds à ressources limitées. Dans cette thèse, nous proposons de nouvelles approches collaboratives pour l'établissement de clés, dans le but de réduire les exigences des protocoles de sécurité existants, afin que ceux-ci puissent être mis en œuvre par des nœuds à ressources limitées. Nous avons particulièrement retenu les protocoles TLS Handshake, IKE et HIP BEX comme les meilleurs candidats correspondant aux exigences de sécurité de bout en bout pour l'IdO. Puis nous les avons modifiés de sorte que le nœud contraint en énergie puisse déléguer les opérations cryptographiques couteuses à un ensemble de nœuds au voisinage, tirant ainsi avantage de l'hétérogénéité spatiale qui caractérise l IdO. Nous avons entrepris des vérifications formelles de sécurité et des analyses de performance qui prouvent la sureté et l'efficacité énergétique des protocoles collaboratifs proposés. Dans une deuxième partie, nous avons porté notre attention sur une classe d attaques internes que la collaboration entre les nœuds peut induire et que les mécanismes cryptographiques classiques, tels que la signature et le chiffrement, s'avèrent impuissants à contrer. Cela nous a amené à introduire la notion de confiance au sein d'un groupe collaboratif. Le niveau de fiabilité d'un nœud est évalué par un mécanisme de sécurité dédié, connu sous le nom de système de gestion de confiance. Ce système est lui aussi instancié sur une base collaborative, dans laquelle plusieurs nœuds partagent leurs témoignages respectifs au sujet de la fiabilité des autres nœuds. En nous appuyant sur une analyse approfondie des systèmes de gestion de confiance existants et des contraintes de l IoD, nous avons conçu un système de gestion de confiance efficace pour nos protocoles collaboratifs. Cette efficacité a été évaluée en tenant compte de la façon dont le système de gestion de la confiance répond aux exigences spécifiques à nos approches proposées pour l'établissement de clés dans le contexte de l'IdO. Les résultats des analyses de performance que nous avons menées démontrent le bon fonctionnement du système proposé et une efficacité accrue par rapport à la littératureThis thesis addresses new security challenges in the Internet of Things (IoT). The current transition from legacy Internet to Internet of Things leads to multiple changes in its communication paradigms. Wireless sensor networks (WSNs) initiated this transition by introducing unattended wireless topologies, mostly made of resource constrained nodes, in which radio spectrum therefore ceased to be the only resource worthy of optimization. Today's Machine to Machine (M2M) and Internet of Things architectures further accentuated this trend, not only by involving wider architectures but also by adding heterogeneity, resource capabilities inconstancy and autonomy to once uniform and deterministic systems. The heterogeneous nature of IoT communications and imbalance in resources capabilities between IoT entities make it challenging to provide the required end-to-end secured connections. Unlike Internet servers, most of IoT components are characterized by low capabilities in terms of both energy and computing resources, and thus, are unable to support complex security schemes. The setup of a secure end-to-end communication channel requires the establishment of a common secret key between both peers, which would be negotiated relying on standard security key exchange protocols such as Transport Layer Security (TLS) Handshake or Internet Key Exchange (IKE). Nevertheless, a direct use of existing key establishment protocols to initiate connections between two IoT entities may be impractical because of the technological gap between them and the resulting inconsistencies in their cryptographic primitives. The issue of adapting existing security protocols to fulfil these new challenges has recently been raised in the international research community but the first proposed solutions failed to satisfy the needs of resource-constrained nodes. In this thesis, we propose novel collaborative approaches for key establishment designed to reduce the requirements of existing security protocols, in order to be supported by resource-constrained devices. We particularly retained TLS handshake, Internet key Exchange and HIP BEX protocols as the best keying candidates fitting the end-to-end security requirements of the IoT. Then we redesigned them so that the constrained peer may delegate its heavy cryptographic load to less constrained nodes in neighbourhood exploiting the spatial heterogeneity of IoT nodes. Formal security verifications and performance analyses were also conducted to ensure the security effectiveness and energy efficiency of our collaborative protocols. However, allowing collaboration between nodes may open the way to a new class of threats, known as internal attacks that conventional cryptographic mechanisms fail to deal with. This introduces the concept of trustworthiness within a collaborative group. The trustworthiness level of a node has to be assessed by a dedicated security mechanism known as a trust management system. This system aims to track nodes behaviours to detect untrustworthy elements and select reliable ones for collaborative services assistance. In turn, a trust management system is instantiated on a collaborative basis, wherein multiple nodes share their evidences about one another's trustworthiness. Based on an extensive analysis of prior trust management systems, we have identified a set of best practices that provided us guidance to design an effective trust management system for our collaborative keying protocols. This effectiveness was assessed by considering how the trust management system could fulfil specific requirements of our proposed approaches for key establishment in the context of the IoT. Performance analysis results show the proper functioning and effectiveness of the proposed system as compared with its counterparts that exist in the literatureEVRY-INT (912282302) / SudocSudocFranceF

Novel Digital Alias-Free Signal Processing Approaches to FIR Filtering Estimation

This thesis aims at developing a new methodology of filtering continuous-time bandlimited signals and piecewise-continuous signals from their discrete-time samples. Unlike the existing state-of-the-art filters, my filters are not adversely affected by aliasing, allowing the designers to flexibly select the sampling rates of the processed signal to reach the required accuracy of signal filtering rather than meeting stiff and often demanding constraints imposed by the classical theory of digital signal processing (DSP). The impact of this thesis is cost reduction of alias-free sampling, filtering and other digital processing blocks, particularly when the processed signals have sparse and unknown spectral support. Novel approaches are proposed which can mitigate the negative effects of aliasing, thanks to the use of nonuniform random/pseudorandom sampling and processing algorithms. As such, the proposed approaches belong to the family of digital alias-free signal processing (DASP). Namely, three main approaches are considered: total random (ToRa), stratified (StSa) and antithetical stratified (AnSt) random sampling techniques. First, I introduce a finite impulse response (FIR) filter estimator for each of the three considered techniques. In addition, a generalised estimator that encompasses the three filter estimators is also proposed. Then, statistical properties of all estimators are investigated to assess their quality. Properties such as expected value, bias, variance, convergence rate, and consistency are all inspected and unveiled. Moreover, closed-form mathematical expression is devised for the variance of each single estimator. Furthermore, quality assessment of the proposed estimators is examined in two main cases related to the smoothness status of the filter convolution’s integrand function, \u1d454(\u1d461,\u1d70f)∶=\u1d465(\u1d70f)ℎ(\u1d461−\u1d70f), and its first two derivatives. The first main case is continuous and differentiable functions \u1d454(\u1d461,\u1d70f), \u1d454′(\u1d461,\u1d70f), and \u1d454′′(\u1d461,\u1d70f). Whereas in the second main case, I cover all possible instances where some/all of such functions are piecewise-continuous and involving a finite number of bounded discontinuities. Primarily obtained results prove that all considered filter estimators are unbiassed and consistent. Hence, variances of the estimators converge to zero after certain number of sample points. However, the convergence rate depends on the selected estimator and which case of smoothness is being considered. In the first case (i.e. continuous \u1d454(\u1d461,\u1d70f) and its derivatives), ToRa, StSa and AnSt filter estimators converge uniformly at rates of \u1d441−1, \u1d441−3, and \u1d441−5 respectively, where 2\u1d441 is the total number of sample points. More interestingly, in the second main case, the convergence rates of StSa and AnSt estimators are maintained even if there are some discontinuities in the first-order derivative (FOD) with respect to \u1d70f of \u1d454(\u1d461,\u1d70f) (for StSa estimator) or in the second-order derivative (SOD) with respect to \u1d70f of \u1d454(\u1d461,\u1d70f) (for AnSt). Whereas these rates drop to \u1d441−2 and \u1d441−4 (for StSa and AnSt, respectively) if the zero-order derivative (ZOD) (for StSa) and FOD (for AnSt) are piecewise-continuous. Finally, if the ZOD of \u1d454(\u1d461,\u1d70f) is piecewise-continuous, then the uniform convergence rate of the AnSt estimator further drops to \u1d441−2. For practical reasons, I also introduce the utilisation of the three estimators in a special situation where the input signal is pseudorandomly sampled from otherwise uniform and dense grid. An FIR filter model with an oversampled finite-duration impulse response, timely aligned with the grid, is proposed and meant to be stored in a lookup table of the implemented filter’s memory to save processing time. Then, a synchronised convolution sum operation is conducted to estimate the filter output. Finally, a new unequally spaced Lagrange interpolation-based rule is proposed. The so-called composite 3-nonuniform-sample (C3NS) rule is employed to estimate area under the curve (AUC) of an integrand function rather than the simple Rectangular rule. I then carry out comparisons for the convergence rates of different estimators based on the two interpolation rules. The proposed C3NS estimator outperforms other Rectangular rule estimators on the expense of higher computational complexity. Of course, this extra cost could only be justifiable for some specific applications where more accurate estimation is required

Selected Papers from the First International Symposium on Future ICT (Future-ICT 2019) in Conjunction with 4th International Symposium on Mobile Internet Security (MobiSec 2019)

The International Symposium on Future ICT (Future-ICT 2019) in conjunction with the 4th International Symposium on Mobile Internet Security (MobiSec 2019) was held on 17–19 October 2019 in Taichung, Taiwan. The symposium provided academic and industry professionals an opportunity to discuss the latest issues and progress in advancing smart applications based on future ICT and its relative security. The symposium aimed to publish high-quality papers strictly related to the various theories and practical applications concerning advanced smart applications, future ICT, and related communications and networks. It was expected that the symposium and its publications would be a trigger for further related research and technology improvements in this field

Real-time signal detection and classification algorithms for body-centered systems

El principal motivo por el cual los sistemas de comunicación en el entrono corporal se desean con el objetivo de poder obtener y procesar señales biométricas para monitorizar e incluso tratar una condición médica sea ésta causada por una enfermedad o el rendimiento de un atleta. Dado que la base de estos sistemas está en la sensorización y el procesado, los algoritmos de procesado de señal son una parte fundamental de los mismos. Esta tesis se centra en los algoritmos de tratamiento de señales en tiempo real que se utilizan tanto para monitorizar los parámetros como para obtener la información que resulta relevante de las señales obtenidas. En la primera parte se introduce los tipos de señales y sensores en los sistemas en el entrono corporal. A continuación se desarrollan dos aplicaciones concretas de los sistemas en el entorno corporal así como los algoritmos que en las mismas se utilizan. La primera aplicación es el control de glucosa en sangre en pacientes con diabetes. En esta parte se desarrolla un método de detección mediante clasificación de patronones de medidas erróneas obtenidas con el monitor contínuo comercial "Minimed CGMS". La segunda aplicacióin consiste en la monitorizacióni de señales neuronales. Descubrimientos recientes en este campo han demostrado enormes posibilidades terapéuticas (por ejemplo, pacientes con parálisis total que son capaces de comunicarse con el entrono gracias a la monitorizacióin e interpretación de señales provenientes de sus neuronas) y también de entretenimiento. En este trabajo, se han desarrollado algoritmos de detección, clasificación y compresión de impulsos neuronales y dichos algoritmos han sido evaluados junto con técnicas de transmisión inalámbricas que posibiliten una monitorización sin cables. Por último, se dedica un capítulo a la transmisión inalámbrica de señales en los sistemas en el entorno corporal. En esta parte se estudia las condiciones del canal que presenta el entorno corporal para la transmisión de sTraver Sebastiá, L. (2012). Real-time signal detection and classification algorithms for body-centered systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/16188Palanci