An agile and adaptive holonic architecture for manufacturing control

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. 2004. Faculdade de Engenharia. Universidade do Port

Building a robotic cyber-physical production component

Cyber-physical systems are a network of integrated computational decisional com-ponents and physical elements. The integration of computational decisional components with the heterogeneous physical automation systems and devices is not transparent and constitutes a critical challenge for the success of this approach. The objective of the paper is to describe an approach to establish standard interfaces based on the use of the ISO 9506 Manufacturing Mes-sage Specification international standard. The proposed approach is exemplified by the con-struction of a robotic cyber-physical production component that is plug-in in a cyber-physical system for a small-scale production system based on Fischertechnik systems.info:eu-repo/semantics/publishedVersio

Agent-based holonic production control

Indexado ISIThe manufacturing system environment is typically a complex system, involving many variables and constraints, being in certain cases a chaotic system. The introduction of new paradigms to face globalisation, distribution of activities and customer satisfaction requirements, increases the problem complexity. The new manufacturing control approaches should support the agile adaptation to volatile technological and economical environments and should react dynamically and quickly to disturbances. This paper intends to introduce an agent-based approach to the manufacturing problem, that uses holonic concepts, is focused on distributed manufacturing shop floor control for discrete batch production, considers the optimisation of set-up and maintenance operations, and develops mechanisms for agile and fast reaction to disturbances without compromising the global production optimisation

ADACOR: a holonic architecture for agile and adaptive manufacturing control

In the last decades significant changes in the manufacturing environment have been noticed: moving from a local economy towards a global economy, with markets asking for products with higher quality at lower costs, highly customised and with short life cycle. In these circumstances, the challenge is to develop manufacturing control systems with intelligence capabilities, fast adaptation to the environment changes and more robustness against the occurrence of disturbances. This paper presents an agile and adaptive manufacturing control architecture that addresses the need for the fast reaction to disturbances at the shop floor level, increasing the agility and flexibility of the enterprise, when it works in volatile environments. The proposed architecture introduces an adaptive control that balances dynamically between a more centralised structure and a more decentralised one, allowing combining the global production optimisation with agile reaction to unexpected disturbances

An Approach to Developing Power Grid Control Systems with IEC 61850, IEC 61499 and Holonic Control

Abstract: -This paper presents some models and concepts for developing smart power grid control systems based on holonic concepts and the open standards IEC 61850, IEC 61499. Along with the proposed holonic models for different levels of control, we present a simple fault protection application illustrating how the IEC 61499 artifacts can be used for modeling and implementation of IEC 61850 compliant applications

Worker-robot cooperation and integration into the manufacturing workcell via the holonic control architecture

Cooperative manufacturing is a new field of research, which addresses new challenges beyond the physical safety of the worker. Those new challenges appear due to the need to connect the worker and the cobot from the informatics point of view in one cooperative workcell. This requires developing an appropriate manufacturing control system, which fits the nature of both the worker and the cobot. Furthermore, the manufacturing control system must be able to understand the production variations, to guide the cooperation between worker and the cobot and adapt with the production variations.Die kooperative Fertigung ist ein neues Forschungsgebiet, das sich neuen Herausforderungen stellt. Diese neuen Herausforderungen ergeben sich aus der Notwendigkeit, den Arbeiter und den Cobot aus der Sicht der Informatik in einem kooperativen Arbeitsplatz zu verbinden. Dies erfordert die Entwicklung eines geeigneten Produktionskontrollsystems, das sowohl der Natur des Arbeiters als auch der des Cobots entspricht. Darüber hinaus muss die Fertigungssteuerung in der Lage sein, die Produktionsschwankungen zu verstehen, um die Zusammenarbeit zwischen Arbeiter und Cobot zu steuern

An agile and adaptive holonic architecture for manufacturing control

In the last decades significant changes in the manufacturing environment have been noticed: moving from a local economy towards a global economy, with markets asking for products with high quality at lower costs, highly customised and with short life cycle. In this environment, the manufacturing enterprises, to avoid the risk to lose competitiveness, search to answer more closely to the customer demands, by improving their flexibility and agility, while maintaining their productivity and quality. Actually, the dynamic response to emergence is becoming a key issue, due to the weak response of the traditional manufacturing control systems to unexpected disturbances, mainly because of the rigidity of their control architectures. In these circumstances, the challenge is to develop manufacturing control systems with autonomy and intelligence capabilities, fast adaptation to the environment changes, more robustness against the occurrence of disturbances, and easier integration of manufacturing resources and legacy systems. Several architectures using emergent concepts and technologies have been proposed, in particular those based in the holonic manufacturing paradigm. Holonic manufacturing is a paradigm based in the ideas of the philosopher Arthur Koestler, who proposed the word holon to describe a basic unit of organisation in biological and social systems. A holon, as Koestler devised the term, is an identifiable part of a (manufacturing) system that has a unique identity, yet is made up of sub-ordinate parts and in turn is part of a larger whole. The introduction of the holonic manufacturing paradigm allows a new approach to the manufacturing problem, bringing the advantages of modularity, decentralisation, autonomy, scalability, and re-use of software components. This dissertation intends to develop an agile and adaptive manufacturing control architecture to face the current requirements imposed to the manufacturing enterprises. The architecture proposed in this dissertation addresses the need for the fast reaction to disturbances at the shop floor level, increasing the agility and flexibility of the enterprise, when it works in volatile environments, characterised by the frequent occurrence of unexpected disturbances. The proposed architecture, designated by ADACOR (ADAptive holonic COntrol aRchitecture for distributed manufacturing systems), is based in the holonic manufacturing paradigm, build upon autonomous and cooperative holons, allowing the development of manufacturing control applications that present all the features of decentralised and holonic systems. ADACOR holonic architecture introduces an adaptive control that balances dynamically between a more centralised structure and a more decentralised one, allowing to combine the global production optimisation with agile reaction to unexpected disturbances. Nas últimas décadas têm-se assistido a mudanças significativas no ambiente de fabrico: evoluindo de uma economia local para um economia global, com os mercados a procurar produtos com elevada qualidade a baixos preços, altamente customizados e com um ciclo de vida curto. Neste ambiente, as empresas de manufactura, para evitar o risco de perda de competitividade, procuram responder às solicitações dos clientes, melhorando a sua flexibilidade e agilidade, mantendo os mesmos índices de produtividade e qualidade. Na verdade, a resposta dinâmica à emergência está a tornar-se num assunto chave, devido `a fraca resposta a perturbações que os sistemas de controlo de fabrico tradicionais apresentam, principalmente devido à rigidez das suas arquitecturas de controlo. Nestas circunstâncias, é fundamental o desenvolvimento de sistemas de controlo de fabrico com capacidades de autonomia e inteligência, rápida adaptação às mudanças, maior robustez à ocorrência de perturbações e fácil integração de recursos físicos e sistemas legados. Diversas arquitecturas usando conceitos e tecnologias emergentes têm sido propostas, em particular algumas baseadas no paradigma da produção holónica. O paradigma da produção holónica é inspirado nas ideias de Arthur Koestler, que propôs a palavra holon para descrever uma unidade básica de organização de sistemas biológicos e sociais. Um holon, de acordo com a definição de Koestler, é uma parte identificável do sistema com identidade única, composta por sub-partes e fazendo simultaneamente parte do todo. A introdução do paradigma da produção holónica permite uma nova abordagem aos sistemas de controlo de fabrico, trazendo vantagens de modularidade, descentralização, autonomia, escalabilidade e reutilização de componentes. Esta dissertação pretende desenvolver uma arquitectura de controlo ágil e adaptativa que suporte os requisitos actuais impostos `as empresas de manufactura. A arquitectura proposta visa a necessidade de uma reacção rápida a perturbações, ao nível da planta fabril, melhorando a flexibilidade e agilidade da empresa quando esta opera em ambientes voláteis, caracterizados pela ocorrência frequente de perturbações inesperadas. A arquitectura proposta, designada por ADACOR (ADAptive holonic COntrol aRchitecture for distributed manufacturing systems), é baseada no paradigma da produção holónica e construída sobre holons autónomos e cooperativos, permitindo o desenvolvimento de aplicações de controlo de fabrico que apresentem todas as características dos sistemas descentralizados e holónicos. A arquitectura holónica ADACOR introduz um controlo adaptativo que balança dinamicamente entre uma estrutura de controlo mais centralizada e uma mais descentralizada, permitindo combinar a optimização da produção com a ágil reacção a perturbações

Open research issues on multi-models for complex technological systems

Abstract -We are going to report here about state of the art works on multi-models for complex technological systems both from the theoretical and practical point of view. A variety of algorithmic approaches (k-mean, dss, etc.) and applicative domains (wind farms, neurological diseases, etc.) are reported to illustrate the extension of the research area

A reference model for information specification for metalworking SMEs

The work reported in this thesis offers a novel basis for the realisation of specifications for information requirements to meet the distinct operational requirements of metalworking SMEs. This has been achieved through the development of a reference SME enterprise model based on fundamental ideas of the holon and fractal factory concepts. The novel concept of a node holon is introduced, which allows the representation of the human dominated interactions in a company based on the fundamental concepts of the holon. This offers a competitive alternative to the methods for enterprise modelling and information specification which are based solely around business processes and procedural rules. A new representation for the organisation of the SME has been based on identifying the major zones of activity within the enterprise, which is seen to provide a more appropriate representation for companies whose basis for operation is informally structured. Two classes of zones have been identified, these are the business support zone and manufacturing zone. The relationship between a top down description of the enterprise as zones and the complementary bottoms up modelling of the enterprise based on concepts of the node holon are described in detail. A critical study of two candidate modelling architectures, namely CIN40SA and ARIS will show the applicability of the individual architectures for the task information specification. The constituents of the SMEE enterprise reference model is placed within the context of contemporary enterprise modelling practice by mapping against one of the architectures. This will demonstrate how the architectures can readily accommodate new modelling approaches whilst retaining their major advantages, thereby increasing their applicability and potential uptake. The reference SME enterprise model has been readily applied in the study of an SME, where a representation of the company has been achieved solely on the current organisation of its business support and manufacturing activities. The holonic aspects of the enterprise have also been successfully modelled. This process is supported by a CASE tool which has it constructs underpinned by the reference SME enterprise model

Current challenges and future trends in the field of communication architectures for microgrids

[EN] The concept of microgrid has emerged as a feasible answer to cope with the increasing number of distributed renewable energy sources which are being introduced into the electrical grid. The microgrid communication network should guarantee a complete and bidirectional connectivity among the microgrid resources, a high reliability and a feasible interoperability. This is in a contrast to the current electrical grid structure which is characterized by the lack of connectivity, being a centralized-unidirectional system. In this paper a review of the microgrids information and communication technologies (ICT) is shown. In addition, a guideline for the transition from the current communication systems to the future generation of microgrid communications is provided. This paper contains a systematic review of the most suitable communication network topologies, technologies and protocols for smart microgrids. It is concluded that a new generation of peer-to-peer communication systems is required towards a dynamic smart microgrid. Potential future research about communications of the next microgrid generation is also identified.This work is supported by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Regional Development Fund (ERDF) under Grant ENE2015-64087-C2-2. This work is supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant BES-2013-064539.Marzal-Romeu, S.; Salas-Puente, RA.; González Medina, R.; Garcerá, G.; Figueres Amorós, E. (2018). Current challenges and future trends in the field of communication architectures for microgrids. Renewable and Sustainable Energy Reviews. 82(2):3610-3622. https://doi.org/10.1016/j.rser.2017.10.101S3610362282