13,509 research outputs found
To develop an efficient variable speed compressor motor system
This research presents a proposed new method of improving the energy efficiency of a Variable Speed Drive (VSD) for induction motors. The principles of VSD are reviewed with emphasis on the efficiency and power losses associated with the operation of the variable speed compressor motor drive, particularly at low speed operation.The efficiency of induction motor when operated at rated speed and load torque
is high. However at low load operation, application of the induction motor at rated flux will cause the iron losses to increase excessively, hence its efficiency will reduce
dramatically. To improve this efficiency, it is essential to obtain the flux level that minimizes the total motor losses. This technique is known as an efficiency or energy
optimization control method. In practice, typical of the compressor load does not require high dynamic response, therefore improvement of the efficiency optimization
control that is proposed in this research is based on scalar control model.In this research, development of a new neural network controller for efficiency optimization control is proposed. The controller is designed to generate both voltage and frequency reference signals imultaneously. To achieve a robust controller from variation of motor parameters, a real-time or on-line learning algorithm based on a second order optimization Levenberg-Marquardt is employed. The simulation of the proposed controller for variable speed compressor is presented. The results obtained
clearly show that the efficiency at low speed is significant increased. Besides that the speed of the motor can be maintained. Furthermore, the controller is also robust to the motor parameters variation. The simulation results are also verified by experiment
A Review on Energy Consumption Optimization Techniques in IoT Based Smart Building Environments
In recent years, due to the unnecessary wastage of electrical energy in
residential buildings, the requirement of energy optimization and user comfort
has gained vital importance. In the literature, various techniques have been
proposed addressing the energy optimization problem. The goal of each technique
was to maintain a balance between user comfort and energy requirements such
that the user can achieve the desired comfort level with the minimum amount of
energy consumption. Researchers have addressed the issue with the help of
different optimization algorithms and variations in the parameters to reduce
energy consumption. To the best of our knowledge, this problem is not solved
yet due to its challenging nature. The gap in the literature is due to the
advancements in the technology and drawbacks of the optimization algorithms and
the introduction of different new optimization algorithms. Further, many newly
proposed optimization algorithms which have produced better accuracy on the
benchmark instances but have not been applied yet for the optimization of
energy consumption in smart homes. In this paper, we have carried out a
detailed literature review of the techniques used for the optimization of
energy consumption and scheduling in smart homes. The detailed discussion has
been carried out on different factors contributing towards thermal comfort,
visual comfort, and air quality comfort. We have also reviewed the fog and edge
computing techniques used in smart homes
Modeling the Drying Kinetics of Green Bell Pepper in a Heat Pump Assisted Fluidized Bed Dryer
In this research, green bell pepper was dried in a pilot plant fluidized bed dryer equipped with a heat pump humidifier using three temperatures of 40, 50 and 60C and two airflow velocities of 2 and 3m/s in constant air moisture. Three modeling methods including nonlinear regression technique, Fuzzy Logic and Artificial Neural Networks were applied to investigate drying kinetics for the sample. Among the mathematical models, Midilli model with R=0.9998 and root mean square error (RMSE)=0.00451 showed the best fit with experimental data. Feed-Forward-Back-Propagation network with Levenberg-Marquardt training algorithm, hyperbolic tangent sigmoid transfer function, training cycle of 1,000 epoch and 2-5-1 topology, deserving R=0.99828 and mean square error (MSE)=5.5E-05, was determined as the best neural model. Overall, Neural Networks method was much more precise than two other methods in prediction of drying kinetics and control of drying parameters for green bell pepper. Practical Applications: This article deals with different modeling approaches and their effectiveness and accuracy for predicting changes in the moisture ratio of green bell pepper enduring fluidized bed drying, which is one of the most concerning issues in food factories involved in drying fruits and vegetables. This research indicates that although efficiency of mathematical modeling, Fuzzy Logic controls and Artificial Neural Networks (ANNs) were all acceptable, the modern prediction methods of Fuzzy Logic and especially ANNs were more productive and precise. Besides, this report compares our findings with previous ones carried out with the view of predicting moisture quotients of other food crops during miscellaneous drying procedures. © 2016 Wiley Periodicals, Inc
Fuzzy sets predict flexural strength and density of silicon nitride ceramics
In this work, we utilize fuzzy sets theory to evaluate and make predictions of flexural strength and density of NASA 6Y silicon nitride ceramic. Processing variables of milling time, sintering time, and sintering nitrogen pressure are used as an input to the fuzzy system. Flexural strength and density are the output parameters of the system. Data from 273 Si3N4 modulus of rupture bars tested at room temperature and 135 bars tested at 1370 C are used in this study. Generalized mean operator and Hamming distance are utilized to build the fuzzy predictive model. The maximum test error for density does not exceed 3.3 percent, and for flexural strength 7.1 percent, as compared with the errors of 1.72 percent and 11.34 percent obtained by using neural networks, respectively. These results demonstrate that fuzzy sets theory can be incorporated into the process of designing materials, such as ceramics, especially for assessing more complex relationships between the processing variables and parameters, like strength, which are governed by randomness of manufacturing processes
Bidirectional optimization of the melting spinning process
This is the author's accepted manuscript (under the provisional title "Bi-directional optimization of the melting spinning process with an immune-enhanced neural network"). The final published article is available from the link below. Copyright 2014 @ IEEE.A bidirectional optimizing approach for the melting spinning process based on an immune-enhanced neural network is proposed. The proposed bidirectional model can not only reveal the internal nonlinear relationship between the process configuration and the quality indices of the fibers as final product, but also provide a tool for engineers to develop new fiber products with expected quality specifications. A neural network is taken as the basis for the bidirectional model, and an immune component is introduced to enlarge the searching scope of the solution field so that the neural network has a larger possibility to find the appropriate and reasonable solution, and the error of prediction can therefore be eliminated. The proposed intelligent model can also help to determine what kind of process configuration should be made in order to produce satisfactory fiber products. To make the proposed model practical to the manufacturing, a software platform is developed. Simulation results show that the proposed model can eliminate the approximation error raised by the neural network-based optimizing model, which is due to the extension of focusing scope by the artificial immune mechanism. Meanwhile, the proposed model with the corresponding software can conduct optimization in two directions, namely, the process optimization and category development, and the corresponding results outperform those with an ordinary neural network-based intelligent model. It is also proved that the proposed model has the potential to act as a valuable tool from which the engineers and decision makers of the spinning process could benefit.National Nature Science Foundation of China, Ministry of Education of China, the Shanghai Committee of Science and Technology), and the Fundamental Research Funds for the Central Universities
Industrial process monitoring by means of recurrent neural networks and Self Organizing Maps
Industrial manufacturing plants often suffer from reliability problems during their day-to-day operations which
have the potential for causing a great impact on the effectiveness and performance of the overall process and the
sub-processes involved. Time-series forecasting of critical industrial signals presents itself as a way to reduce this
impact by extracting knowledge regarding the internal dynamics of the process and advice any process deviations
before it affects the productive process. In this paper, a novel industrial condition monitoring approach based on the
combination of Self Organizing Maps for operating point codification and Recurrent Neural Networks for critical signal
modeling is proposed. The combination of both methods presents a strong synergy, the information of the operating
condition given by the interpretation of the maps helps the model to improve generalization, one of the drawbacks of
recurrent networks, while assuring high accuracy and precision rates. Finally, the complete methodology, in terms of
performance and effectiveness is validated experimentally with real data from a copper rod industrial plant.Postprint (published version
Constrained Nonlinear Model Predictive Control of an MMA Polymerization Process via Evolutionary Optimization
In this work, a nonlinear model predictive controller is developed for a
batch polymerization process. The physical model of the process is
parameterized along a desired trajectory resulting in a trajectory linearized
piecewise model (a multiple linear model bank) and the parameters are
identified for an experimental polymerization reactor. Then, a multiple model
adaptive predictive controller is designed for thermal trajectory tracking of
the MMA polymerization. The input control signal to the process is constrained
by the maximum thermal power provided by the heaters. The constrained
optimization in the model predictive controller is solved via genetic
algorithms to minimize a DMC cost function in each sampling interval.Comment: 12 pages, 9 figures, 28 reference
Modeling and Recognition of Smart Grid Faults by a Combined Approach of Dissimilarity Learning and One-Class Classification
Detecting faults in electrical power grids is of paramount importance, either
from the electricity operator and consumer viewpoints. Modern electric power
grids (smart grids) are equipped with smart sensors that allow to gather
real-time information regarding the physical status of all the component
elements belonging to the whole infrastructure (e.g., cables and related
insulation, transformers, breakers and so on). In real-world smart grid
systems, usually, additional information that are related to the operational
status of the grid itself are collected such as meteorological information.
Designing a suitable recognition (discrimination) model of faults in a
real-world smart grid system is hence a challenging task. This follows from the
heterogeneity of the information that actually determine a typical fault
condition. The second point is that, for synthesizing a recognition model, in
practice only the conditions of observed faults are usually meaningful.
Therefore, a suitable recognition model should be synthesized by making use of
the observed fault conditions only. In this paper, we deal with the problem of
modeling and recognizing faults in a real-world smart grid system, which
supplies the entire city of Rome, Italy. Recognition of faults is addressed by
following a combined approach of multiple dissimilarity measures customization
and one-class classification techniques. We provide here an in-depth study
related to the available data and to the models synthesized by the proposed
one-class classifier. We offer also a comprehensive analysis of the fault
recognition results by exploiting a fuzzy set based reliability decision rule
- …