36 research outputs found
Golng off the Grid: Optimizing Solar Renewable Energy Systems at Remote Locations to Minimize Logistics Requirements, Increase Sustainability, and Strengthen Energy Assurance
Grid-based electrical infrastructure is unavailable at many remote locations including developing nation communities, isolated construction sites, and military contingency bases. Powering these locations with diesel generators requires regular fuel resupply, resulting in increased costs, environmental impacts, and burdensome logistics—making generators an obstacle for energy resiliency and sustainability. This research examines using solar renewable energy systems to replace generators at remote locations and presents a multi-objective optimization model that minimizes logistics variables. Replacing a single deployed generator would save over 500,000 gal of fuel annually, eliminating the need for 100 fuel tanker deliveries
Analysis of Solar Community Energy Storage for Supporting Hawaii\u27s 100% Renewable Energy Goals
Solar PV generation has become an integral part of the renewable energy industry. With state-level, renewable portfolio standards in place, solar power demand has substantially increased and become a competitive and economically viable energy solution throughout the world. Hawaii has one of the most aggressive renewable portfolio standards with a goal of 100 percent renewable generation by 2045. However, there are challenges that are preventing the growth of the solar PV market in Hawaii including equal accessibility to solar power and solar power overloading causing grid instability. With Hawaii’s high annual solar radiation, PV generation could play a significant role in reaching 100 percent renewable generation as long as a solution is put in place to alleviate overload to the grid while also expanding the adoption of solar. Community solar and energy storage techniques could potentially provide the support the solar industry needs to achieve this goal in Hawaii. This paper evaluates the success of two solar community energy storage projects, the Detroit Edison Community Energy Storage Project and the Sacramento Municipal Utility District Anatolia Pilot Project, based on five criteria, the state’s renewable portfolio standard, available funding, level of solar incentives, site location, and amount of annual solar radiation. Based on this analysis, recommendations for the implementation of solar community energy storage projects in Hawaii are provided to determine if solar community energy storage techniques can facilitate growth in the solar PV market by overcoming the grid instability and accessibility challenges affecting utility companies throughout the Hawaiian Islands
Study of Smart Grid Technology and Its Development in Indian Scenario
India is truculent to meet the electric power demands of a fast expanding economy. Restructuring of the power
industry has only increased several challenges for the power system engineers. The proposed vision of
introducing viable Smart Grid (SG) at various levels in the Indian power systems has recommended that an
advanced automation mechanism needs to be adapted. Smart Grids are introduced to make the grid operation
smarter and intelligent. Smart grid operations, upon appropriate deployment can open up new avenues and
opportunities with significant financial implications. This work presents various Smart grid initiatives and
implications in the context of power market evolution in India. Various examples of existing structures of
automation in India are employed to underscore some of the views presented in this report. It also reviews the
progress made in Smart grid technology research and development since its inception. Attempts are made to
highlight the current and future issues involved for the development of Smart Grid technology for future
demands in Indian perspective
Broad Overview of Energy Efficiency and Renewable Energy Opportunities for Department of Defense Installations
The Strategic Environmental Research and Developmental Program (SERDP)/Environmental Security Technology Certification Program (ESTCP) is the Department of Defense?s (DOD) environmental science and technology program focusing on issues related to environment and energy for the military services. The SERDP/ESTCP Office requested that the National Renewable Energy Laboratory (NREL) provide technical assistance with strategic planning by evaluating the potential for several types of renewable energy technologies at DOD installations. NREL was tasked to provide technical expertise and strategic advice for the feasibility of geothermal resources, waste-to-energy technology, photovoltaics (PV), wind, microgrids, and building system technologies on military installations. This technical report is the deliverable for these tasks
A Viable Residential DC Microgrid for Low Income Communities – Architecture, Protection and Education
The availability of fossil fuels in the future and the environmental effects such as the carbon footprint of the existing methodologies to produce electricity is an increasing area of concern. In rural areas of under-developed parts of the world, the problem is lack of access to electrification. DC microgrids have become a proven solution to electrification in these areas with demonstrated exceptional quality of power, high reliability, efficiency, and simplified integration between renewable energy sources (principally solar PV) and energy storage. In the United States, a different problem occurs that can be addressed with the same DC microgrid approach that is finding success internationally. In disinvested, underserved communities with high unemployment and low wages, households contribute a significant portion of their income towards the fixed cost of their electrical utility connection, which by law must be supplied to every household. In order to realize such a microgrid in these communities, there are three major areas which need to be accounted for. Firstly, there needs to be a custom architecture for the community under consideration and it needs to be economical to match the needs of the underserved community. Secondly, DC microgrid for home energy interconnection is potentially less complex and less expensive to deploy, operate and maintain however, faster protection is a key element to ensuring resilience, viability and adoptability. Lastly, these types of efforts will be sustainable only if the people in the community are educated and invested in the same as they are the key stakeholders in these systems.
This dissertation presents an approach to make the DC Microgrid economically feasible for low income households by reducing the cost they incur on electric bills. The approach is to overlay a DC system into homes that have a utility feed in order to incorporate renewable energy usage into an urban setting for the express purpose of driving down individual household utility costs. The results show that the incorporation of a certain level of “smart” appliances and fixtures into the renovation of vacated homes and the use of a microgrid to enable sharing of renewable energy, such as solar power combined with energy storage, between homes in the proposed architecture yields the least expensive option for the patrons. The development of solid state circuit breakers that interface between the microgrid and the home DC power panels helps in faster protection of the DC system. In this dissertation, a SiC JFET based device is designed and built to protect against DC faults at a faster rate than the available solutions. The prototype is tested for verification and used to discriminate against short circuit faults and the results show the successful fault discrimination capabilities of the device. A basic system level simulation with the protection device is implemented using Real Time Hardware in the loop platform. Finally, as a part of engaging the community members, the high school kids in the area who might potentially be living in some of the houses in this community are being educated about the microgrid, appliances and other technologies to get a better understanding of STEM and hopefully inspiring them to pursue a career in STEM in the future
A Viable Residential DC Microgrid for Low Income Communities – Architecture, Protection and Education
The availability of fossil fuels in the future and the environmental effects such as the carbon footprint of the existing methodologies to produce electricity is an increasing area of concern. In rural areas of under-developed parts of the world, the problem is lack of access to electrification. DC microgrids have become a proven solution to electrification in these areas with demonstrated exceptional quality of power, high reliability, efficiency, and simplified integration between renewable energy sources (principally solar PV) and energy storage. In the United States, a different problem occurs that can be addressed with the same DC microgrid approach that is finding success internationally. In disinvested, underserved communities with high unemployment and low wages, households contribute a significant portion of their income towards the fixed cost of their electrical utility connection, which by law must be supplied to every household. In order to realize such a microgrid in these communities, there are three major areas which need to be accounted for. Firstly, there needs to be a custom architecture for the community under consideration and it needs to be economical to match the needs of the underserved community. Secondly, DC microgrid for home energy interconnection is potentially less complex and less expensive to deploy, operate and maintain however, faster protection is a key element to ensuring resilience, viability and adoptability. Lastly, these types of efforts will be sustainable only if the people in the community are educated and invested in the same as they are the key stakeholders in these systems.
This dissertation presents an approach to make the DC Microgrid economically feasible for low income households by reducing the cost they incur on electric bills. The approach is to overlay a DC system into homes that have a utility feed in order to incorporate renewable energy usage into an urban setting for the express purpose of driving down individual household utility costs. The results show that the incorporation of a certain level of “smart” appliances and fixtures into the renovation of vacated homes and the use of a microgrid to enable sharing of renewable energy, such as solar power combined with energy storage, between homes in the proposed architecture yields the least expensive option for the patrons. The development of solid state circuit breakers that interface between the microgrid and the home DC power panels helps in faster protection of the DC system. In this dissertation, a SiC JFET based device is designed and built to protect against DC faults at a faster rate than the available solutions. The prototype is tested for verification and used to discriminate against short circuit faults and the results show the successful fault discrimination capabilities of the device. A basic system level simulation with the protection device is implemented using Real Time Hardware in the loop platform. Finally, as a part of engaging the community members, the high school kids in the area who might potentially be living in some of the houses in this community are being educated about the microgrid, appliances and other technologies to get a better understanding of STEM and hopefully inspiring them to pursue a career in STEM in the future
Insights from the Inventory of Smart Grid Projects in Europe: 2012 Update
By the end of 2010 the Joint Research Centre, the European Commission’s in-house science service, launched the first comprehensive inventory of smart grid projects in Europe1. The final catalogue was published in July 2011 and included 219 smart grid and smart metering projects from the EU-28 member states, Switzerland and Norway. The participation of the project coordinators and the reception of the report by the smart grid community were extremely positive.
Due to its success, the European Commission decided that the project inventory would be carried out on a regular basis so as to constantly update the picture of smart grid developments in Europe and keep track of lessons learnt and of challenges and opportunities.
For this, a new on-line questionnaire was launched in March 2012 and information on projects collected up to September 2012. At the same time an extensive search of project information on the internet and through cooperation links with other European research organizations was conducted. The resulting final database is the most up to date and comprehensive inventory of smart grids and smart metering projects in Europe, including a total of 281 smart grid projects and 90 smart metering pilot projects and rollouts from the same 30 countries that were included in the 2011 inventory database. Projects surveyed were classified into three categories: R&D, demonstration or pre-deployment) and deployment, and for the first time a distinction between smart grid and smart metering projects was made. The following is an insight into the 2012 report.JRC.F.3-Energy securit
Sustainable energy supply in rural arctic areas
The dissertation is a collection of the three leading publications, which result from
the doctoral research project ‘Sustainable Energy Supply in Remote Arctic Areas -
Analysis of resources, technology and policies for developing energy systems’. The
research focuses on which energy resources are available in the Arctic and how the
various resources can be harvested with different mature energy technology options
for remote Arctic communities. Mature energy generation technology means that
the operation under harsh and cold climatical conditions is well proven.
Furthermore, the current energy situation among remote Arctic communities will be
mapped out, with an analysis of which energy sources are used, the share of the
different sources, and the energy demand of remote communities. After explaining
the different energy generation options and main drivers for using renewable energy
in remote Arctic communities, three case studies have been conducted. The case
studies examine the viability of a potential energy transition for Arctic communities.
The case studies also share some insights from field visits in remote communities
on generating electricity with renewables and potential energy saving potentials.
The last part elaborates on different integration strategies for renewable energy
options. The focus lies on how to finance the energy transition in remote Arctic
communities, which can help to structure the energy transition process financially.
The dissertation finishes with an overall conclusion on the importance of renewable
energy for Arctic communities. The research shows that renewable energy can be
vital for remote communities to become more energy independent and lower the
energy cost burden.Iceland Research Fund, Grant Nr. 195846-053; e Landsvirkjun Energy Fund, Grants NÝR-10 – 2019, NÝR-17 – 2020, NÝR-15 - 202