Climate Mitigation and Adaptation Strategies for Roofs and Pavements. A Case Study at Sapienza University Campus

The progressively emerging concept of urban resilience to climate change highlights the importance of mitigation and adaptation measures, and the need to integrate urban climatology in the design process, in order to better understand the multiple effects of combined green and cool technologies for the transition to climate responsive and thermally comfortable urban open spaces. This study focuses the attention on selected mitigation and adaptation technologies; two renovation scenarios were designed and modeled according to the minimal intervention criterion. The study pays attention to the effect on surface temperature and physiological equivalent temperature (PET) of vegetation and high albedo materials characterizing the horizontal boundaries of the site. The Sapienza University campus, a historical site in Rome, is taken as a case study. These results highlight the importance of treed open spaces and the combination of permeable green pavements associated with cool roofs as the most effective strategy for the mitigation of summer heatwaves and the improvement of outdoor thermal comfort

Environmental performance of rainwater harvesting strategies in Mediterranean buildings

Purpose: The rapid urbanization and the constant expansion of urban areas during the last decades have locally led to increasing water shortage. Rainwater harvesting (RWH) systems have the potential to be an important contributor to urban water self-sufficiency. The goal of this study was to select an environmentally optimal RWH strategy in newly constructed residential buildings linked to rainwater demand for laundry under Mediterranean climatic conditions, without accounting for water from the mains. Methods: Different strategies were environmentally assessed for the design and use of RWH infrastructures in residential apartment blocks in Mediterranean climates. The harvested rainwater was used for laundry in all strategies. These strategies accounted for (i) tank location (i.e., tank distributed over the roof and underground tank), (ii) building height considering the number of stories (i.e., 6, 9, 12, and 15), and (iii) distribution strategy (i.e., shared laundry, supply to the nearest apartments, and distribution throughout the building). The RWH systems consisted of the catchment, storage, and distribution stages, and the structural and hydraulic calculations were based on Mediterranean conditions. The quantification of the environmental performance of each strategy (e.g., CO2eq. emissions) was performed in accordance with the life cycle assessment methodology. Results and discussion: According to the environmental assessment, the tank location and distribution strategy chosen were the most important variables in the optimization of RWH systems. Roof tank strategies present fewer impacts than their underground tank equivalents because they enhance energy and material savings, and their reinforcement requirements can be accounted for within the safety factors of the building structure without the tank. Among roof tanks and depending on the height, a distribution strategy that concentrates demand in a laundry room was the preferable option, resulting in reductions from 25 to 54 % in most of the selected impact categories compared to distribution throughout the building. Conclusions: These results may set new urban planning standards for the design and construction of buildings from the perspective of sustainable water management. In this sense, a behavioral change regarding demand should be promoted in compact, dense urban settlements.Peer ReviewedPostprint (author's final draft

The Strategy of the Commons: Modelling the Annual Cost of Successful ICT Services for European Research

The provision of ICT services for research is increasingly using Cloud services to complement the traditional federation of computing centres. Due to the complex funding structure and differences in the basic business model, comparing the cost-effectiveness of these options requires a new approach to cost assessment. This paper presents a cost assessment method addressing the limitations of the standard methods and some of the initial results of the study. This acts as an illustration of the kind of cost assessment issues high-utilisation rate ICT services should consider when choosing between different infrastructure options. The research is co-funded by the European Commission Seventh Framework Programme through the e-FISCAL project (contract number RI-283449)

A study of existing Ontologies in the IoT-domain

Several domains have adopted the increasing use of IoT-based devices to collect sensor data for generating abstractions and perceptions of the real world. This sensor data is multi-modal and heterogeneous in nature. This heterogeneity induces interoperability issues while developing cross-domain applications, thereby restricting the possibility of reusing sensor data to develop new applications. As a solution to this, semantic approaches have been proposed in the literature to tackle problems related to interoperability of sensor data. Several ontologies have been proposed to handle different aspects of IoT-based sensor data collection, ranging from discovering the IoT sensors for data collection to applying reasoning on the collected sensor data for drawing inferences. In this paper, we survey these existing semantic ontologies to provide an overview of the recent developments in this field. We highlight the fundamental ontological concepts (e.g., sensor-capabilities and context-awareness) required for an IoT-based application, and survey the existing ontologies which include these concepts. Based on our study, we also identify the shortcomings of currently available ontologies, which serves as a stepping stone to state the need for a common unified ontology for the IoT domain.Comment: Submitted to Elsevier JWS SI on Web semantics for the Internet/Web of Thing

Crossing the death valley to transfer environmental decision support systems to the water market

Environmental decision support systems (EDSSs) are attractive tools to cope with the complexity of environmental global challenges. Several thoughtful reviews have analyzed EDSSs to identify the key challenges and best practices for their development. One of the major criticisms is that a wide and generalized use of deployed EDSSs has not been observed. The paper briefly describes and compares four case studies of EDSSs applied to the water domain, where the key aspects involved in the initial conception and the use and transfer evolution that determine the final success or failure of these tools (i.e., market uptake) are identified. Those aspects that contribute to bridging the gap between the EDSS science and the EDSS market are highlighted in the manuscript. Experience suggests that the construction of a successful EDSS should focus significant efforts on crossing the death-valley toward a general use implementation by society (the market) rather than on development.The authors would like to thank the Catalan Water Agency (Agència Catalana de l’Aigua), Besòs River Basin Regional Administration (Consorci per la Defensa de la Conca del Riu Besòs), SISLtech, and Spanish Ministry of Science and Innovation for providing funding (CTM2012-38314-C02-01 and CTM2015-66892-R). LEQUIA, KEMLG, and ICRA were recognized as consolidated research groups by the Catalan Government under the codes 2014-SGR-1168, 2013-SGR-1304 and 2014-SGR-291.Peer ReviewedPostprint (published version

Local Energy Efficiency Interventions by the Prioritization of Thermal Zones in an Historical University Building

Architectural constraints are a crucial aspect in energy retrofitting of historic buildings. Usual global interventions are often not allowed since preserving historical values of the building stock is mandatory. In this paper, the authors provide an alternative procedure by identifying the most profitable local interventions in order to maintain the architectural values during the restoration and energy retrofitting operations. So, thermal zones prioritization is the key element considered in this study. Its aim is to analyse which energy efficiency measures could be applied to a listed building, but at certain technological elements rather than a unique choice for the entire building envelope. Thus it will prove that you can work with individual elements of the building without compromising the protection of architectural good. The attention was placed in promoting single measures and improving the quality of the built environment. The case study is an historical building in Rome, currently used for university purposes. The analysis was carried out through a building simulation model so that to assess the building energy performance before and after the selected interventions. The chosen software is TRNSYS. This approach shows how interventions, usually not applicable at the building scale, would be beneficial if applied at local scale such as a single thermal zone or a single technological unit. The authors built a reference scenario and, for each identified thermal zone, tested the energy efficiency improvement in terms of heating demand reduction coming from the hypothesized local intervention

E-finance-lab at the House of Finance : about us

The financial services industry is believed to be on the verge of a dramatic [r]evolution. A substantial redesign of its value chains aimed at reducing costs, providing more efficient and flexible services and enabling new products and revenue streams is imminent. But there seems to be no clear migration path nor goal which can cast light on the question where the finance industry and its various players will be and should be in a decade from now. The mission of the E-Finance Lab is the development and application of research methodologies in the financial industry that promote and assess how business strategies and structures are shared and supported by strategies and structures of information systems. Important challenges include the design of smart production infrastructures, the development and evaluation of advantageous sourcing strategies and smart selling concepts to enable new revenue streams for financial service providers in the future. Overall, our goal is to contribute methods and views to the realignment of the E-Finance value chain. ..

Simulation and Visualization of Thermal Metaphor in a Virtual Environment for Thermal Building Assessment

La référence est présente sur HAL mais est incomplète (il manque les co-auteurs et le fichier pdf).The current application of the design process through energy efficiency in virtual reality (VR) systems is limited mostly to building performance predictions, as the issue of the data formats and the workflow used for 3D modeling, thermal calculation and VR visualization. The importance of energy efficiency and integration of advances in building design and VR technology have lead this research to focus on thermal simulation results visualized in a virtual environment to optimize building design, particularly concerning heritage buildings. The emphasis is on the representation of thermal data of a room simulated in a virtual environment (VE) in order to improve the ways in which thermal analysis data are presented to the building stakeholder, with the aim of increasing accuracy and efficiency. The approach is to present more immersive thermal simulation and to project the calculation results in projective displays particularly in Immersion room (CAVE-like). The main idea concerning the experiment is to provide an instrument of visualization and interaction concerning the thermal conditions in a virtual building. Thus the user can immerge, interact, and perceive the impact of the modifications generated by the system, regarding the thermal simulation results. The research has demonstrated it is possible to improve the representation and interpretation of building performance data, particularly for thermal results using visualization techniques.Direktorat Riset dan Pengabdian Masyarakat (DRPM) Universitas Indonesia Research Grant No. 2191/H2.R12/HKP.05.00/201

Wind Power Cogeneration to Reduce Peak Electricity Demand in Mexican States Along the Gulf of Mexico

The Energetic Transition Law in Mexico has established that in the next years, the country has to produce at least 35% of its energy from clean sources in 2024. Based on this, a proposal in this study is the cogeneration between the principal thermal power plants along the Mexican states of the Gulf of Mexico with modeled wind farms near to these thermal plants with the objective to reduce peak electricity demand. These microscale models were done with hourly MERRA-2 data that included wind speed, wind direction, temperature, and atmospheric pressure with records from 1980–2018 and taking into account roughness, orography, and climatology of the site. Wind speed daily profile for each model was compared to electricity demand trajectory, and it was seen that wind speed has a peak at the same time. The amount of power delivered to the electric grid with this cogeneration in Rio Bravo and Altamira (Northeast region) is 2657.02 MW and for Tuxpan and Dos Bocas from the Eastern region is 3196.18 MW. This implies a reduction at the peak demand. In the Northeast region, the power demand at the peak is 8000 MW, and for Eastern region 7200 MW. If wind farms and thermal power plants work at the same time in Northeast and Eastern regions, the amount of power delivered by other sources of energy at this moment will be 5342.98 MW and 4003.82 MW, respectively