Development of a virtual personal video recorder based on a set top box

Estágio realizado na Fraunhofer Portugal ResearchTese de mestrado integrado. Engenharia Electrotécnica e de Computadores (Major Telecomunicações). Faculdade de Engenharia. Universidade do Porto. 200

An SNMP-based audio distribution service architecture

Dissertação de mestrado em Engenharia de Redes e Serviços TelemáticosThe constant growth of integration and popularity of “Internet of Things” devices is affecting home automation systems, where new technologies were introduced, in the recent years for this particular sector. These automation systems integrate devices that can be anywhere in the house, connected to a home network, either through a wire or wireless connection. A home automation system can be used to control air conditioning, lighting, pool control systems, home-entertainment systems and much more. Within the field of home-entertainment systems, the best known technologies are the Digital Living Network Alliance and the Digital Audio Access Protocol, which provide interoperability to allow sharing of digital media content between devices across a home network. However, these technologies have the disadvantage of being proprietary, maintaining restrict documentation access, complex architectures and concepts and not optimal to specific purposes, like audio distribution. The main goal of this project was to prove that is possible to use standardized protocols, such as the Simple Network Manager Protocol and open source tools in order to develop a music distribution service that allows the implementation of similar features than the ones already existing proprietary technologies. As such, the implementation prototype system allows a user to manage and play audio from a music collection that is stored in a single home audio server. The system architecture enables audio streaming between the server and the various devices in the same local network. Further more, the music collection, can integrate virtual audio files that are available from external music sources, like iTunes, etc.O constante crescimento de integração e popularidade da “Internet das coisas” tem atualmente afetado sistemas de domótica, onde cada vez mais tecnologias têm vindo a ser desenvolvidas nos últimos anos para este sector em particular. Estes sistemas de domótica integram dispositivos que podem estar em qualquer parte de uma casa, ligados à rede seja através de um cabo ou por wireless. Um sistema de domótica pode ser usado para controlar: ar condicionado, iluminação, sistemas de controlo de piscinas, sistemas de entretenimento, entre outros. Na área de sistemas de entretenimento, as tecnologias mais conhecidas são Digital Living Network Alliance e Digital Audio Access Protocol, que fornecem interoperabilidade de modo a permitir a partilha de conteúdos digitais multimédia entre dispositivos que se encontram na mesma rede local. Contudo, possuem a desvantagem de serem tecnologias proprietárias, com documentação e manuais restritos, arquiteturas e conceitos complexos, e não otimizados para fins específicos, tal distribuição de áudio. O principal objetivo deste projeto foi provar que é possível usar protocolos normalizados, como o Simple Network Manager Protocol e ferramentas open source de forma a desenvolver um serviço de distribuição de música que permite a implementação de funcionalidades semelhantes às tecnologias proprietárias já existentes. Assim, o protótipo implementado permite a um utilizador gerir e reproduzir áudio de uma coleção de música que se esteja armazenada num servidor de áudio domestico. A arquitetura permite streaming de áudio entre o servidor e os diferentes dispositivos que se encontram na mesma rede local. Consequentemente, a coleção de música pode integrar ficheiros de áudio visuais que estejam acessíveis através de fontes externas de música, como por exemplo: iTunes, etc

Efficient service discovery in wide area networks

Living in an increasingly networked world, with an abundant number of services available to consumers, the consumer electronics market is enjoying a boom. The average consumer in the developed world may own several networked devices such as games consoles, mobile phones, PDAs, laptops and desktops, wireless picture frames and printers to name but a few. With this growing number of networked devices comes a growing demand for services, defined here as functions requested by a client and provided by a networked node. For example, a client may wish to download and share music or pictures, find and use printer services, or lookup information (e.g. train times, cinema bookings). It is notable that a significant proportion of networked devices are now mobile. Mobile devices introduce a new dynamic to the service discovery problem, such as lower battery and processing power and more expensive bandwidth. Device owners expect to access services not only in their immediate proximity, but further afield (e.g. in their homes and offices). Solving these problems is the focus of this research. This Thesis offers two alternative approaches to service discovery in Wide Area Networks (WANs). Firstly, a unique combination of the Session Initiation Protocol (SIP) and the OSGi middleware technology is presented to provide both mobility and service discovery capability in WANs. Through experimentation, this technique is shown to be successful where the number of operating domains is small, but it does not scale well. To address the issue of scalability, this Thesis proposes the use of Peer-to-Peer (P2P) service overlays as a medium for service discovery in WANs. To confirm that P2P overlays can in fact support service discovery, a technique to utilise the Distributed Hash Table (DHT) functionality of distributed systems is used to store and retrieve service advertisements. Through simulation, this is shown to be both a scalable and a flexible service discovery technique. However, the problems associated with P2P networks with respect to efficiency are well documented. In a novel approach to reduce messaging costs in P2P networks, multi-destination multicast is used. Two well known P2P overlays are extended using the Explicit Multi-Unicast (XCAST) protocol. The resulting analysis of this extension provides a strong argument for multiple P2P maintenance algorithms co-existing in a single P2P overlay to provide adaptable performance. A novel multi-tier P2P overlay system is presented, which is tailored for service rich mobile devices and which provides an efficient platform for service discovery

Network and service monitoring in heterogeneous home networks

Home networks are becoming dynamic and technologically heterogeneous. They consist of an increasing number of devices which offer several functionalities and can be used for many different services. In the home, these devices are interconnected using a mixture of networking technologies (for example, Ethernet, Wifi, coaxial cable, or power-line). However, interconnecting these devices is often not easy. The increasing heterogeneity has led to significant device- and service-management complexity. In addition, home networks provide a critical "last meters" access to the public telecom and Internet infrastructure and have a dramatic impact on to the end-to-end reliability and performance of services from these networks. This challenges service providers not only to maintain a satisfactory quality of service level in such heterogeneous home networks, but also to remotely monitor and troubleshoot them. The present thesis work contributes research and several solutions in the field of network and service monitoring in home networks, mainly in three areas: (1) providing automatic device- and service-discovery and configuration, (2) remote management, and (3) providing quality of service (QoS). With regard to the first area, current service discovery technology is designed to relieve the increasing human role in network and service administration. However, the relevant Service Discovery Protocols (SDPs) are lacking crucial features namely: (1) they are not platform- and network-independent, and (2) they do not provide sufficient mechanisms for (device) resource reservation. Consequently, devices implementing different SDPs cannot communicate with each other and share their functionalities and resources in a managed way, especially when they use different network technologies. As a solution to the first problem, we propose a new proxy server architecture that enables IP-based devices and services to be discovered on non-IP based network and vice versa. We implemented the proxy architecture using UPnP respectively Bluetooth SDP as IP- and non-IP-based SDPs. The proxy allows Bluetooth devices and UPnP control points to discover, access, and utilize services located on the other network. Validation experiments with the proxy prototype showed that seamless inter-working can be achieved keeping all proxy functionalities on a single device, thus not requiring modification of currently existing UPnP and Bluetooth end devices. Although the proxy itself taxes the end-to-end performance of the service, it is shown to be still acceptable for an end user. For mitigating resource conflicts in SDPs, we propose a generic resource reservation scheme with properties derived from common SDP operation. Performance studies with a prototype showed that this reservation scheme significantly improves the scalability and sustainability of service access in SDPs, at a minor computational cost. With regard to the second area, it is known that the end-to-end quality of Internet services depends crucially on the performance of the home network. Consequently, service providers require the ability to monitor and configure devices in the home network, behind the home gateway (HG). However, they can only put limited requirements to these off-the-shelf devices, as the consumer electronics market is largely outside their span of control. Therefore they have to make intelligent use of the given device control and management protocols. In this work, we propose an architecture for remote discovery and management of devices in a highly heterogeneous home network. A proof-of-concept is developed for the remote management of UPnP devices in the home with a TR-069/UPnP proxy on the HG. Although this architecture is protocol specific, it can be easily adapted to other web-services based protocols. Service providers are also asking for diagnostic tools with which they can remotely troubleshoot the home networks. One of these tools should be able to gather information about the topology of the home network. Although topology discovery protocols already exist, nothing is known yet about their performance. In this work we propose a set of key performance indicators for home network topology discovery architectures, and how they should be measured. We applied them to the Link-Layer Topology Discovery (LLTD) protocol and the Link-Layer Discovery Protocol (LLDP). Our performance measurement results show that these protocols do not fulfill all the requirements as formulated by the service providers. With regard to the third area, current QoS solutions are mostly based on traffic classification. Because they need to be supported by all devices in the network, they are relatively expensive for home networks. Furthermore, they are not interoperable between different networking technologies. Alternative QoS provision techniques have been proposed in the literature. These techniques require end-user services to pragmatically adapt their properties to the actual condition of the network. For this, the condition of the home network in terms of its available bandwidth, delay, jitter, etc., needs to be known in real time. Appropriate tools for determining the available home network resources do not yet exist. In this work we propose a new method to probe the path capacity and available bandwidth between a server and a client in a home network. The main features of this method are: (a) it does not require adaptation of existing end devices, (b) it does not require pre-knowledge of the link-layer network topology, and (c) it is accurate enough to make reliable QoS predictions for the most relevant home applications. To use these predictions for effective service- or content-adaptation or admission control, one should also know how the state of the home network is expected to change immediately after the current state has been probed. However, not much is known about the stochastic properties of traffic in home networks. Based on a relatively small set of traffic observations in several home networks in the Netherlands, we were able to build a preliminary model for home network traffic dynamics

Development and standardization of an embedded Linux based triple-play IP settop box

Thesis (Master)--Izmir Institute of Technology, Electronics and Communication Engineering, Izmir, 2007Includes bibliographical references (leaves: 46-48)Text in English; Abstract: Turkish and Englishix, 57 leavesWith the recent enhancements to the delivery of IP services and of the video codecs such as h.264, transmission of television through IP-based communication systems has been a viable option. An IP settop box (IPSTB) constructs a bridge between a television set and a broadband IP network such as DSL, cable modem, powerline or wireless broadband. IPSTB brings new challenges for the system designers, especially in the areas of inherently organized home networking systems, protocols, and architectures. Future IPSTB products are candidate to converge the information and entertainment technologies. This thesis suggests newly developed device and service discovery methods for the design of an IPSTB software structure that is compatible with the Universal Plug and Play (UPnP) audio video (AV) device descriptions. At the design process, it suggests optimized communication schemes between the servers that are in the control of service providers, and the consumer IPSTBs. As a newly developed technology, since there is not any standardization for most parts of the overall IPTV system, this thesis takes proven mechanisms as basis and adapts them to the overall design that consists of the hardware drivers, middleware, and the additional programs which helps the middleware to handle the external components of the system connected via USB or serial interfaces. Being an innovative idea, we have used a control system called Virtual Bus Manager so as to communicate between the aforementioned system components. Some system components such as web browser is based on the X Windows architecture, so cross compiling the X system for the embedded platform has also been a challenge for the feasibility of the final design. Being the second part of the Triple-Play system, Voice over IP application has also been included and based on the compilation of open source software for the corresponding embedded system. Finally, the web browser itself has been based on the popular Gecko web-core that is derived from Firefox

Context gathering in Ubiquitous Environments: Enhanced Service Discovery

Delivering individualized services that conform to the user’s current situation will form the focus of ubiquitous environments. A description of the networked environment at a semantic level will necessitate contextually oriented knowledge acquisition methods. This then engenders unique challenges for the crucial step of resource discovery. A number of service discovery protocols exist to perform this role. In this paper, we identify the requirements inherent for such an environment and investigate the suitability of the available protocols against these. A suitable candidate solution is proposed with an implementation with semantic extensions and reference points for further enhancements

Carbook: A Platform for Mobile Automotive Services

Wireless mobile technologies have triggered a rapid development of secondary network technologies. One such prominent field of technology is interoperability for consumer devices. This field is mostly based on XML and Web Services and it includes technologies such as Universal Plug-and-Play, open media container formats, open codecs and Rich Internet Application technologies for mobile devices. Automotive field has been relatively slow and conservative in embracing these new Internet technologies. This is about to change as European Union and other substantial players are pressing forward with the safety and environmental technologies in cars. These technologies depend heavily on wireless Internet connectivity. As part of this thesis work, I have played a central role in defining the core concept of a distributed framework for mobile automotive services, Carbook System. I have also outlined the first phase of a shared research environment, Carlab, for these kinds of services. Carlab is used to demonstrate different technologies in accordance to Elektrobit’s vision for the future automotive Internet services. Carbook System will be implemented incrementally jointly with the continuation of the Carlab implementation. In this master of science thesis I have mapped and evaluated the essential technologies and created a preliminary outline for Carbook System and a set of services. The first phase Carlab network topology and emulation of different domains in Carbook System are also drafted in this thesis work