Software Defined Radio Solutions for Wireless Communications Systems

Wireless technologies have been advancing rapidly, especially in the recent years. Design, implementation, and manufacturing of devices supporting the continuously evolving technologies require great efforts. Thus, building platforms compatible with different generations of standards and technologies has gained a lot of interest. As a result, software defined radios (SDRs) are investigated to offer more flexibility and scalability, and reduce the design efforts, compared to the conventional fixed-function hardware-based solutions.This thesis mainly addresses the challenges related to SDR-based implementation of today’s wireless devices. One of the main targets of most of the wireless standards has been to improve the achievable data rates, which imposes strict requirements on the processing platforms. Realizing real-time processing of high throughput signal processing algorithms using SDR-based platforms while maintaining energy consumption close to conventional approaches is a challenging topic that is addressed in this thesis.Firstly, this thesis concentrates on the challenges of a real-time software-based implementation for the very high throughput (VHT) Institute of Electrical and Electronics Engineers (IEEE) 802.11ac amendment from the wireless local area networks (WLAN) family, where an SDR-based solution is introduced for the frequency-domain baseband processing of a multiple-input multipleoutput (MIMO) transmitter and receiver. The feasibility of the implementation is evaluated with respect to the number of clock cycles and the consumed power. Furthermore, a digital front-end (DFE) concept is developed for the IEEE 802.11ac receiver, where the 80 MHz waveform is divided to two 40 MHz signals. This is carried out through time-domain digital filtering and decimation, which is challenging due to the latency and cyclic prefix (CP) budget of the receiver. Different multi-rate channelization architectures are developed, and the software implementation is presented and evaluated in terms of execution time, number of clock cycles, power, and energy consumption on different multi-core platforms.Secondly, this thesis addresses selected advanced techniques developed to realize inband fullduplex (IBFD) systems, which aim at improving spectral efficiency in today’s congested radio spectrum. IBFD refers to concurrent transmission and reception on the same frequency band, where the main challenge to combat is the strong self-interference (SI). In this thesis, an SDRbased solution is introduced, which is capable of real-time mitigation of the SI signal. The implementation results show possibility of achieving real-time sufficient SI suppression under time-varying environments using low-power, mobile-scale multi-core processing platforms. To investigate the challenges associated with SDR implementations for mobile-scale devices with limited processing and power resources, processing platforms suitable for hand-held devices are selected in this thesis work. On the baseband processing side, a very long instruction word (VLIW) processor, optimized for wireless communication applications, is utilized. Furthermore, in the solutions presented for the DFE processing and the digital SI canceller, commercial off-the-shelf (COTS) multi-core central processing units (CPUs) and graphics processing units (GPUs) are used with the aim of investigating the performance enhancement achieved by utilizing parallel processing.Overall, this thesis provides solutions to the challenges of low-power, and real-time software-based implementation of computationally intensive signal processing algorithms for the current and future communications systems

Implementation of New Multiple Access Technique Encoder for 5G Wireless Telecomunication Networks

RÉSUMÉ Les exigences de la connectivité mobile massive de différents appareils et de diverses applications déterminent les besoins des prochaines générations de technologies mobiles (5G) afin de surmonter les demandes futures. L'expansion significative de la connectivité et de la densité du trafic caractérisent les besoins de la cinquième génération de réseaux mobiles. Par conséquent, pour la 5G, il est nécessaire d'avoir une densité de connectivité beaucoup plus élevée et une plus grande portée de mobilité, un débit beaucoup plus élevé et une latence beaucoup plus faible. En raison de l'exigence d'une connectivité massive, de nombreuses nouvelles technologies doivent être améliorées: le codage des canaux, la technique d'accès multiple, la modulation et la diversité, etc. Par conséquent, compte tenu de l'environnement 5G, surcoût de signalisation et de la latence devrait être pris en compte [1]. En outre, l'application de la virtualisation des accès sans fil (WAV) devrait également être considérée et, par conséquent, il est également nécessaire de concevoir la plate-forme matérielle prenant en charge les nouvelles normes pour la mise en œuvre des émetteurs-récepteurs virtuels. L'une des nouvelles technologies possibles pour la 5G est l'accès multiple pour améliorer le débit. Par conséquent, au lieu d'OFDMA utilisé dans la norme LTE (4G), l'application d'une nouvelle technique d'accès multiple appelée Sparse Code Multiple Access (SCMA) est investiguée dans cette dissertation. SCMA est une nouvelle technique d'accès multiple non orthogonale du domaine fréquentiel proposée pour améliorer l'efficacité spectrale de l'accès radio sans fil [2]. L'encodage SCMA est l'un des algorithmes les plus simples dans les techniques d'accès multiple qui offre l'opportunité d'expérimenter des méthodes génériques de mise en oeuvre. En outre, la nouvelle méthode d'accès multiple est supposée fournir un débit plus élevé. Le choix du codage SCMA avec moins de complexité pourrait être une approche appropriée. La cible fixée pour cette recherche était d'atteindre un débit d’encodage de plus de 1 Gbps pour le codeur SCMA. Les implémentations de codage SCMA ont été effectuées à la fois en logiciel et en matériel pour permettre de les comparer. Les implémentations logicielles ont été développées avec le langage de programmation C. Parmi plusieurs conceptions, la performance a été améliorée en utilisant différentes méthodes pour augmenter le parallélisme, diminuer la complexité de calcul et par conséquent le temps de traitement.----------ABSTRACT The demands of massive mobile connectivity of different devices and diverse applications at the same time set requirments for next generations of mobile technology (5G). The significant expansion of connectivity and traffic density characterize the requirements of fifth generation mobile. Therefore, in 5G, there is a need to have much higher connectivity density, higher mobility ranges, much higher throughput, and much lower latency. In pursuance of the requirement of massive connectivity, numerous technologies must be improved: channel coding, multiple access technique, modulation and diversity, etc. For instance, with 5G, the cost of signaling overhead and latency should be taken into account [1]. Besides, applying wireless access virtualization (WAV) should be considered and there is also a need to have effective implementations supporting novel virtual transceiver. One of the possible new technologies for 5G is exploiting multiple access techniques to improve throughput. Therefore, instead of OFDMA in LTE (4G), applying a new multiple access technique called Sparse Code Multiple Access (SCMA) is an approach considered in this dissertation. SCMA is a new frequency domain non-orthogonal multiple access technique proposed to improve spectral efficiency of wireless radio access [2]. SCMA encoding is one of the simplest multiple access technique that offers an opportunity to experiment generic implementation methods. In addition, the new multiple access method is supposed to provide higher throughput, thus choosing SCMA encoding with less complexity could be an appropriate approach. The target with SCMA was to achieve an encoding throughput of more that 1Gbps. SCMA encoding implementations were done both in software and hardware to allow comparing them. The software implementations were developed with the C programing language. Among several designs, the performance was improved by using different methods to increase parallelism, decrease the computational complexity and consequently the processing time. The best achieved results with software implementations offer a 3.59 Gbps throughput, which is 3.5 times more that the target. For hardware implementation, high level synthesis was experimented. In order to do that, the C based functions and testbenches which were developed for software implementations, were used as inputs to Vivado HLS

Receptores de rádio-frequência melhorados e disruptivos

This Ph.D. mainly addresses the reception part of a radio front end, focusing on Radio Frequency (RF) sampling architectures. These are considered to be the most promising future candidates to get better performance in terms of bandwidth and agility, following the well-known Software-Defined Radio (SDR) concept. The study considers the usage of an RF receiver in a standalone operation, i.e., used for receiving unknown data at the antenna, and when used as observation path for Power Amplifier (PA) linearization via Digital Predistortion (DPD), since nowadays this represents a mandatory technique to increase overall system’s performance. Firstly, commercial available RF Analog-Digital-Converters (ADCs) are studied and characterized to understand their limitations when used in DPD scenarios. A method for characterization and digital post-compensation to improve performance is proposed and evaluated. Secondly, an innovative FPGA-based RF single-bit pulsed converter based on Pulse Width Modulation (PWM) is addressed targeting frequency agility, high analog input bandwidth, and system integration, taking profit of an FPGA-based implementation. The latter was optimized based on PWM theoretical behavior maximizing Signal-to-Noise-Ratio (SNR) and bandwidth. The optimized receiver, was afterwards evaluated in a 5G C-RAN architecture and as a feedback loop for DPD. Finally, a brief study regarding DPD feedback loops in the scope of multiantenna transmitters is presented. This Ph.D. contributes with several advances to the state-of-the-art of SDR receiver, and to the so-called SDR DPD concept.Este doutoramento endereça principalmente a componente de receção de um transcetor de rádio-frequência (RF), focando-se em arquiteturas de receção de amostragem em RF. Estas são assim consideradas como sendo as mais promissoras para o futuro, em termos de desempenho, largura de banda e agilidade, de acordo com o conhecido conceito de Rádios Definidos por Software (SDR). O estudo considera o uso dos recetores de RF em modo standalone, i.e., recebendo dados desconhecidos provenientes da antena, e também quando usados como caminho de observação para aplicação de linearização de amplificadores de potência (PAs) via pré-distorção digital (DPD), pois atualmente esta é uma técnica fundamental para aumentar o desempenho geral do sistema. Em primeiro lugar, os conversores analógico-digital de RF são estudados e caracterizados para perceber as suas limitações quando usados em cenários de DPD. Um método de caracterização e pós compensação digital é proposto para obter melhorias de desempenho. Em segundo lugar, um novo recetor pulsado de um bit baseado em Modulação de Largura de Pulso (PWM) e implementado em Agregado de Células Lógicas Programáveis (FPGA) é endereçado, visando agilidade em frequência, largura de banda analógica e integração de sistema, tirando proveito da implementação em FPGA. Este recetor foi otimizado com base no modelo comportamental teórico da modulação PWM, maximizando a relação sinalruído (SNR) e a largura de banda. O recetor otimizado foi posteriormente avaliado num cenário 5G de uma arquitetura C-RAN e também num cenário em que serve de caminho de observação para DPD. Finalmente, um breve estudo relativo a caminhos de observação de DPD no contexto de transmissores multi-antena é também apresentado. Este doutoramento contribui com vários avanços no estado da arte de recetores SDR e no conceito de SDR DPD.Programa Doutoral em Engenharia Eletrotécnic

Feasibility study of multiantenna transmitter baseband processing on customized processor core in wireless local area devices

The world of wireless communications is governed by a wide variety of the standards, each tailored to its specific applications and targets. The IEEE802.11 family is one of those standards which is specifically created and maintained by IEEE committee to im-plement the Wireless Local Area Network (WLAN) communication. By notably rapid growth of devices which exploit the WLAN technology and increasing demand for rich multimedia functionalities and broad Internet access, the WLAN technology should be necessarily enhanced to support the required specifications. In this regard, IEEE802.11ac, the latest amendment of the WLAN technology, was released which is taking advantage of the previous draft versions while benefiting from certain changes especially to the PHY layer to satisfy the promised requirements. This thesis evaluates the feasibility of software-based implementation for the MIMO transmitter baseband processing conforming to the IEEE802.11ac standard on a DSP core with vector extensions. The transmitter is implemented in four different transmis-sion scenarios which include 2x2 and 4x4 MIMO configurations, yielding beyond 1Gbps transmit bit rate. The implementation is done for the frequency-domain pro-cessing and real-time operation has been achieved when running at a clock fre-quency of 500MHz. The developed software solution is evaluated by profiling and analysing the imple-mentation using the tools provided by the vendor. We have presented the results with regards to number of clock cycles, power and energy consumption, and memory usage. The performance analysis shows that the SDR based implementation provides improved flexibility and reduced design effort compared to conventional approaches while main-taining power consumption close to fixed-function hardware solutions

Green radio communication networks applying radio-over-fibre technology for wireless access

Wireless communication increasingly is becoming the first choice link to enter into the global information society. It is an essential part of broadband communication networks, due to its capacity to cover the end-user domain, outdoors or indoors. The use of mobile phones and broadband has already exceeded the one of the fixed telephones and has caused tremendous changes in peoples life, as not only to be recognised in the current political overthrows. The all-around presence of wireless communication links combined with functions that support mobility will make a roaming person-bound communication network possible in the near future. This idea of a personal network, in which a user has his own communication environment available everywhere, necessitates immense numbers of radio access points to maintain the wireless links and support mobility. The progress towards “all-around wireless” needs budget and easily maintainable radio access points, with simplified signal processing and consolidation of the radio network functions in a central station. The RF energy consumption in mobile base stations is one of the main problems in the wireless communication system, which has led to the worldwide research in so called green communication, which offers an environmentally friendly and cost-effective solution. In order to extend networks and mobility support, the simplification of antenna stations and broadband communication capacity becomes an increasingly urgent demand, also the extension of the wireless signal transmission distance to consolidate the signal processing in a centralised site. Radio-over-Fibre technology (RoF) was considered and found to be the most promising solution to achieve effective delivery of wireless and baseband signals, also to reduce RF energy consumption. The overall aim of this research project was to simulate the transmission of wireless and baseband RF signals via fibre for a long distance in high quality, consuming a low-power budget. Therefore, this thesis demonstrated a green radio communication network and the advantage of transmitting signals via fibre rather than via air. The contributions of this research work were described in the follows: Firstly, a comparison of the power consumption in WiMAX via air and fibre is presented. As shown in the simulation results, the power budget for the transmission of 64 QAM WiMAX IEEE 802.16-2005 via air for a distance of 5km lies at -189.67 dB, whereas for the transmission via RoF for a distance of 140km, the power consumption ranges at 65dB. Through the deployment of a triple symmetrical compensator technique, consisting of SMF, DCF and FBG, the transmission distance of the 54 Mbps WiMAX signal can be increased to 410km without increasing the power budget of 65dB. An amendment of the triple compensator technique to SMF, DCF and CFBG allows a 120Mbps WiMAX signal transmission with a clear RF spectrum of 3.5 GHz and constellation diagram over a fibre length of 792km using a power budget of 192dB. Secondly, the thesis demonstrates a simulation setup for the deployment of more than one wireless system, namely 64 QAM WiMAX IEEE 802.16-2005 and LTE, for a data bit rate of 1Gbps via Wavelength Division Multiplexing (WDM) RoF over a transmission distance of 1800km. The RoF system includes two triple symmetrical compensator techniques - DCF, SMF, and CFBG - to obtain a large bandwidth, power budget of 393.6dB and a high signal quality for the long transmission distance. Finally, the thesis proposed a high data bit rate and energy efficient simulation architecture, applying a passive optical component for a transmission span up to 600km. A Gigabit Optical Passive Network (GPON) based on RoF downlink 2.5 Gbps and uplink 1.25Gbps is employed to carry LTE and WiMAX, also 18 digital channels by utilising Coarse Wavelength Division Multiplexing (CWDM). The setup achieved high data speed, a low-power budget of 151.2dB, and an increased service length of up to 600km

Ultra-Wideband Secure Communications and Direct RF Sampling Transceivers

Larger wireless device bandwidth results in new capabilities in terms of higher data rates and security. The 5G evolution is focus on exploiting larger bandwidths for higher though-puts. Interference and co-existence issues can also be addressed by the larger bandwidth in the 5G and 6G evolution. This dissertation introduces of a novel Ultra-wideband (UWB) Code Division Multiple Access (CDMA) technique to exploit the largest bandwidth available in the upcoming wireless connectivity scenarios. The dissertation addresses interference immunity, secure communication at the physical layer and longer distance communication due to increased receiver sensitivity. The dissertation presents the design, workflow, simulations, hardware prototypes and experimental measurements to demonstrate the benefits of wideband Code-Division-Multiple-Access. Specifically, a description of each of the hardware and software stages is presented along with simulations of different scenarios using a test-bench and open-field measurements. The measurements provided experimental validation carried out to demonstrate the interference mitigation capabilities. In addition, Direct RF sampling techniques are employed to handle the larger bandwidth and avoid analog components. Additionally, a transmit and receive chain is designed and implemented at 28 GHz to provide a proof-of-concept for future 5G applications. The proposed wideband transceiver is also used to demonstrate higher accuracy direction finding, as much as 10 times improvement

Hardware Accelerator for MIMO Wireless Systems

Ever increasing demand for higher data rates and better Quality of Service (QoS) for a growing number of users requires new transceiver algorithms and architectures to better exploit the available spectrum and to efficiently counter the impairments of the radio channel. Multiple-Input Multiple-Output (MIMO) communication systems employ multiple antennas at both transmitter and at the receiver to meet the requirements of next-generation wireless systems. It is a promising technology to provide increased data rates while not involving an equivalent increase in the spectral requirements. However, practical implementation of MIMO detectors poses a significant challenge and has been consistently identified as the major bottleneck for realizing the full potential that multiple antenna systems promise. Furthermore, in order to make judicious use of the available bandwidth, the baseband units have to dynamically adapt to different modes (modulation schemes, code rates etc) of operations. Flexibility and high throughput requirements often place conflicting demands on the Very Large Scale Integration (VLSI) system designer. The major focus of this dissertation is to present efficient VLSI architectures for configurable MIMO detectors that can serve as accelerators to enable the realization of next generation wireless devices feasible. Both, hard output and soft output detector architectures are considered