Annual Report, 2013-2014

Beginning in 2004/2005- issued in online format onl

Automatische Konfiguration der Bewegungssteuerung von Industrierobotern

Robotersteuerungen erfordern sehr lange Entwicklungszeiten und hohe Entwicklungskosten. Die Software wird sehr aufwändig von Hand entwickelt und implementiert. Die automatische, schnelle und zuverlässige Konfiguration der Bewegungssteuerung von beliebigen Robotertypen ist neuartig. Hierfür wurde in dieser Arbeit ein System zur automatisierten Konfiguration komponentenbasierter Software auf Basis einer Beschreibung der mechanischen Struktur und Eigenschaften von Industrierobotern entwickelt

Control flow graphs for real-time systems analysis: reconstruction from binary executables and usage in ILP-based path analysis

Real-time systems have to complete their actions w.r.t. given timing constraints. In order to validate that these constraints are met, static timing analysis is usually performed to compute an upper bound of the worst-case execution times (WCET) of all the involved tasks. This thesis identifies the requirements of real-time system analysis on the control flow graph that the static analyses work on. A novel approach is presented that extracts a control flow graph from binary executables, which are typically used when performing WCET analysis of real-time systems. Timing analysis can be split into two steps: a) the analysis of the behaviour of the hardware components, b) finding the worst-case path. A novel approach to path analysis is described in this thesis that introduces sophisticated interprocedural analysis techniques that were not available before.Echtzeitsysteme müssen ihre Aufgaben innerhalb vorgegebener Zeitschranken abwickeln. Um die Einhaltung der Zeitschranken zu überprüfen, sind für gewöhnlich statische Analysen der schlimmsten Ausführzeiten der Teilprogramme des Echtzeitsystems nötig. Diese Arbeit stellt die Anforderungen von Echtzeitsystem an den Kontrollflussgraphen vor, auf dem die statischen Analysen arbeiten. Ein neuartiger Ansatz zur Rückberechnung von Kontrollflußgraphen aus Maschinenprogrammen, die häufig die Grundlage der WCET-Analyse von Echtzeitsystemen bilden, wird vorgestellt. WCET-Analysen können in zwei Teile zerlegt werden: a) die Analyse des Verhaltens der Hardwarebausteine, b) die Suche nach dem schlimmsten Ausführpfad. In dieser Arbeit wird ein neuartiger Ansatz der Pfadanalyse vorgestellt, der für ausgefeilte interprozedurale Analysemethoden ausgelegt ist, die vorher hier nicht verfügbar waren

Control flow graphs for real-time systems analysis: reconstruction from binary executables and usage in ILP-based path analysis

Real-time systems have to complete their actions w.r.t. given timing constraints. In order to validate that these constraints are met, static timing analysis is usually performed to compute an upper bound of the worst-case execution times (WCET) of all the involved tasks. This thesis identifies the requirements of real-time system analysis on the control flow graph that the static analyses work on. A novel approach is presented that extracts a control flow graph from binary executables, which are typically used when performing WCET analysis of real-time systems. Timing analysis can be split into two steps: a) the analysis of the behaviour of the hardware components, b) finding the worst-case path. A novel approach to path analysis is described in this thesis that introduces sophisticated interprocedural analysis techniques that were not available before.Echtzeitsysteme müssen ihre Aufgaben innerhalb vorgegebener Zeitschranken abwickeln. Um die Einhaltung der Zeitschranken zu überprüfen, sind für gewöhnlich statische Analysen der schlimmsten Ausführzeiten der Teilprogramme des Echtzeitsystems nötig. Diese Arbeit stellt die Anforderungen von Echtzeitsystem an den Kontrollflussgraphen vor, auf dem die statischen Analysen arbeiten. Ein neuartiger Ansatz zur Rückberechnung von Kontrollflußgraphen aus Maschinenprogrammen, die häufig die Grundlage der WCET-Analyse von Echtzeitsystemen bilden, wird vorgestellt. WCET-Analysen können in zwei Teile zerlegt werden: a) die Analyse des Verhaltens der Hardwarebausteine, b) die Suche nach dem schlimmsten Ausführpfad. In dieser Arbeit wird ein neuartiger Ansatz der Pfadanalyse vorgestellt, der für ausgefeilte interprozedurale Analysemethoden ausgelegt ist, die vorher hier nicht verfügbar waren

Antitrust Analysis of Sports Leagues

I present an overview of the antitrust literature on sports leagues, with particular emphasis on the National Collegiate Athletic Association, the National Football League, Major League Baseball, the National Basketball Association, and the National Hockey League, as well as on sanctioning organizations such as NASCAR. I review the major antitrust court decisions, the commentaries of the leading antitrust experts on these decisions, and the extensive sports economics literature touching on issues raised in these cases, particularly empirical studies assessing the anticompetitive and procompetitive effects of various league rules and policies. I also review the broader industrial organization literature on issues such as factors affecting the stability of joint ventures. I conclude with a summary of proposals for addressing the monopoly power of sports leagues

Détermination de propriétés de flot de données pour améliorer les estimations de temps d'exécution pire-cas

La recherche d'une borne supérieure au temps d'exécution d'un programme est une partie essentielle du processus de vérification de systèmes temps-réel critiques. Les programmes de tels systèmes ont généralement des temps d'exécution variables et il est difficile, voire impossible, de prédire l'ensemble de ces temps possibles. Au lieu de cela, il est préférable de rechercher une approximation du temps d'exécution pire-cas ou Worst-Case Execution Time (WCET). Une propriété cruciale de cette approximation est qu'elle doit être sûre, c'est-à-dire qu'elle doit être garantie de majorer le WCET. Parce que nous cherchons à prouver que le système en question se termine en un temps raisonnable, une surapproximation est le seul type d'approximation acceptable. La garantie de cette propriété de sûreté ne saurait raisonnablement se faire sans analyse statique, un résultat se basant sur une série de tests ne pouvant être sûr sans un traitement exhaustif des cas d'exécution. De plus, en l'absence de certification du processus de compilation (et de transfert des propriétés vers le binaire), l'extraction de propriétés doit se faire directement sur le code binaire pour garantir leur fiabilité. Toutefois, cette approximation a un coût : un pessimisme - écart entre le WCET estimé et le WCET réel - important entraîne des surcoûts superflus de matériel pour que le système respecte les contraintes temporelles qui lui sont imposées. Il s'agit donc ensuite, tout en maintenant la garantie de sécurité de l'estimation du WCET, d'améliorer sa précision en réduisant cet écart de telle sorte qu'il soit suffisamment faible pour ne pas entraîner des coûts supplémentaires démesurés. Un des principaux facteurs de surestimation est la prise en compte de chemins d'exécution sémantiquement impossibles, dits infaisables, dans le calcul du WCET. Ceci est dû à l'analyse par énumération implicite des chemins ou Implicit Path Enumeration Technique (IPET) qui raisonne sur un surensemble des chemins d'exécution. Lorsque le chemin d'exécution pire-cas ou Worst-Case Execution Path (WCEP), correspondant au WCET estimé, porte sur un chemin infaisable, la précision de cette estimation est négativement affectée. Afin de parer à cette perte de précision, cette thèse propose une technique de détection de chemins infaisables, permettant l'amélioration de la précision des analyses statiques (dont celles pour le WCET) en les informant de l'infaisabilité de certains chemins du programme. Cette information est passée sous la forme de propriétés de flot de données formatées dans un langage d'annotation portable, FFX, permettant la communication des résultats de notre analyse de chemins infaisables vers d'autres analyses. Les méthodes présentées dans cette thèse sont inclues dans le framework OTAWA, développé au sein de l'équipe TRACES à l'IRIT. Elles usent elles-mêmes d'approximations pour représenter les états possibles de la machine en différents points du programme. Ce sont des abstractions maintenues au fil de l'analyse, et dont la validité est assurée par des outils de la théorie de l'interprétation abstraite. Ces abstractions permettent de représenter de manière efficace - mais sûre - les ensembles d'états pour une classe de chemins d'exécution jusqu'à un point du programme, et de détecter d'éventuels points du programme associés à un ensemble d'états possibles vide, traduisant un (ou plusieurs) chemin(s) infaisable(s). L'objectif de l'analyse développée, la détection de tels cas, est rendue possible par l'usage de solveurs SMT (Satisfiabilité Modulo des Théories). Ces solveurs permettent essentiellement de déterminer la satisfiabilité d'un ensemble de contraintes, déduites à partir des états abstraits construits. Lorsqu'un ensemble de contraintes, formé à partir d'une conjonction de prédicats, s'avère insatisfiable, aucune valuation des variables de la machine ne correspond à un cas d'exécution possible, et la famille de chemins associée est donc infaisable. L'efficacité de cette technique est soutenue par une série d'expérimentations sur divers suites de benchmarks, reconnues dans le domaine du WCET statique et/ou issues de cas réels de l'industrie. Des heuristiques sont configurées afin d'adoucir la complexité de l'analyse, en particulier pour les applications de plus grande taille. Les chemins infaisables détectés sont injectés sous la forme de contraintes de flot linéaires dans le système de Programmation Linéaire en Nombres Entiers ou Integer Linear Programming (ILP) pilotant le calcul final de l'analyse WCET d'OTAWA. Selon le programme analysé, cela peut résulter en une réduction du WCET estimé, et donc une amélioration de sa précision.The search for an upper bound of the execution time of a program is an essential part of the verification of real-time critical systems. The execution times of the programs of such systems generally vary a lot, and it is difficult, or impossible, to predict the range of the possible times. Instead, it is better to look for an approximation of the Worst-Case Execution Time (WCET). A crucial requirement of this estimate is that it must be safe, that is, it must be guaranteed above the real WCET. Because we are looking to prove that the system in question terminates reasonably quickly, an overapproximation is the only acceptable form of approximation. The guarantee of such a safety property could not sensibly be done without static analysis, as a result based on a battery of tests could not be safe without an exhaustive handling of test cases. Furthermore, in the absence of a certified compiler (and tech- nique for the safe transfer of properties to the binaries), the extraction of properties must be done directly on binary code to warrant their soundness. However, this approximation comes with a cost : an important pessimism, the gap between the estimated WCET and the real WCET, would lead to superfluous extra costs in hardware in order for the system to respect the imposed timing requirements. It is therefore important to improve the precision of the WCET by reducing this gap, while maintaining the safety property, as such that it is low enough to not lead to immoderate costs. A major cause of overestimation is the inclusion of semantically impossible paths, said infeasible paths, in the WCET computation. This is due to the use of the Implicit Path Enumeration Technique (IPET), which works on an superset of the possible execution paths. When the Worst-Case Execution Path (WCEP), corresponding to the estimated WCET, is infeasible, the precision of that estimation is negatively affected. In order to deal with this loss of precision, this thesis proposes an infeasible paths detection technique, enabling the improvement of the precision of static analyses (namely for WCET estimation) by notifying them of the infeasibility of some paths of the program. This information is then passed as data flow properties, formatted in the FFX portable annotation language, and allowing the communication of the results of our infeasible path analysis to other analyses. The methods hereafter presented are included in the OTAWA framework, developed in TRACES team at the IRIT lab. They themselves make use of approximations in order to represent the possible states of the machine in various program points. These approximations are abstractions maintained throughout the analysis, and which validity is ensured by abstract interpretation tools. They enable us to represent the set of states for a family of execution paths up to a given program point in an efficient - yet safe - way, and to detect the potential program points associated to an empty set of possible states, signalling one (or several) infeasible path(s). As the end goal of the developed analysis, the detection of such cases is made possible by the use of Satisfiability Modulo Theory (SMT) solvers. Those solvers are notably able to determine the satisfiability of a set of contraints, which we deduct from the abstract states. If a set of constraints, derived from a conjonction of predicates, is unsatisfiable, then there exists no valuation of the machine variables that match a possible execution case, and thus the associated infeasible paths are infeasible. The efficiency of this technique is asserted by a series of experiments on various benchmarks suites, some of which widely recognized in the domain of static WCET, some others derived from actual industrial applications. Heuristics are set up in order to soften the complexity of the analysis, especially for the larger applications. The detected infeasible paths are injected as Integer Linear Programming (ILP) linear data flow constraints in the final computation for the WCET estimation in OTAWA. Depending on the analysed program, this can result in a reduction of the estimated WCET, thereby improving its precision

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

IST Austria Thesis

This dissertation focuses on algorithmic aspects of program verification, and presents modeling and complexity advances on several problems related to the static analysis of programs, the stateless model checking of concurrent programs, and the competitive analysis of real-time scheduling algorithms. Our contributions can be broadly grouped into five categories. Our first contribution is a set of new algorithms and data structures for the quantitative and data-flow analysis of programs, based on the graph-theoretic notion of treewidth. It has been observed that the control-flow graphs of typical programs have special structure, and are characterized as graphs of small treewidth. We utilize this structural property to provide faster algorithms for the quantitative and data-flow analysis of recursive and concurrent programs. In most cases we make an algebraic treatment of the considered problem, where several interesting analyses, such as the reachability, shortest path, and certain kind of data-flow analysis problems follow as special cases. We exploit the constant-treewidth property to obtain algorithmic improvements for on-demand versions of the problems, and provide data structures with various tradeoffs between the resources spent in the preprocessing and querying phase. We also improve on the algorithmic complexity of quantitative problems outside the algebraic path framework, namely of the minimum mean-payoff, minimum ratio, and minimum initial credit for energy problems. Our second contribution is a set of algorithms for Dyck reachability with applications to data-dependence analysis and alias analysis. In particular, we develop an optimal algorithm for Dyck reachability on bidirected graphs, which are ubiquitous in context-insensitive, field-sensitive points-to analysis. Additionally, we develop an efficient algorithm for context-sensitive data-dependence analysis via Dyck reachability, where the task is to obtain analysis summaries of library code in the presence of callbacks. Our algorithm preprocesses libraries in almost linear time, after which the contribution of the library in the complexity of the client analysis is (i)~linear in the number of call sites and (ii)~only logarithmic in the size of the whole library, as opposed to linear in the size of the whole library. Finally, we prove that Dyck reachability is Boolean Matrix Multiplication-hard in general, and the hardness also holds for graphs of constant treewidth. This hardness result strongly indicates that there exist no combinatorial algorithms for Dyck reachability with truly subcubic complexity. Our third contribution is the formalization and algorithmic treatment of the Quantitative Interprocedural Analysis framework. In this framework, the transitions of a recursive program are annotated as good, bad or neutral, and receive a weight which measures the magnitude of their respective effect. The Quantitative Interprocedural Analysis problem asks to determine whether there exists an infinite run of the program where the long-run ratio of the bad weights over the good weights is above a given threshold. We illustrate how several quantitative problems related to static analysis of recursive programs can be instantiated in this framework, and present some case studies to this direction. Our fourth contribution is a new dynamic partial-order reduction for the stateless model checking of concurrent programs. Traditional approaches rely on the standard Mazurkiewicz equivalence between traces, by means of partitioning the trace space into equivalence classes, and attempting to explore a few representatives from each class. We present a new dynamic partial-order reduction method called the Data-centric Partial Order Reduction (DC-DPOR). Our algorithm is based on a new equivalence between traces, called the observation equivalence. DC-DPOR explores a coarser partitioning of the trace space than any exploration method based on the standard Mazurkiewicz equivalence. Depending on the program, the new partitioning can be even exponentially coarser. Additionally, DC-DPOR spends only polynomial time in each explored class. Our fifth contribution is the use of automata and game-theoretic verification techniques in the competitive analysis and synthesis of real-time scheduling algorithms for firm-deadline tasks. On the analysis side, we leverage automata on infinite words to compute the competitive ratio of real-time schedulers subject to various environmental constraints. On the synthesis side, we introduce a new instance of two-player mean-payoff partial-information games, and show how the synthesis of an optimal real-time scheduler can be reduced to computing winning strategies in this new type of games

Intelligent Sensor Networks

In the last decade, wireless or wired sensor networks have attracted much attention. However, most designs target general sensor network issues including protocol stack (routing, MAC, etc.) and security issues. This book focuses on the close integration of sensing, networking, and smart signal processing via machine learning. Based on their world-class research, the authors present the fundamentals of intelligent sensor networks. They cover sensing and sampling, distributed signal processing, and intelligent signal learning. In addition, they present cutting-edge research results from leading experts