1,587 research outputs found

    Three-dimensional foot shape analysis in children : a pilot analysis using three-dimensional shape descriptors

    Get PDF
    Existing clinical measures to describe foot morphology are limited in that they are commonly two-dimensional, low in resolution and accuracy, and do not accurately represent the multi-planar and complex changes during development across childhood. Using three-dimensional (3D) scanner technology provides the opportunity to understand more about morphological changes throughout childhood with higher resolution and potentially more relevant 3D shape measures. This is important to advance the prevailing arguments about the typical development of children's feet and inform the development of appropriate clinical measures. 3D shape descriptors derived from 3D scanning can be used to quantify changes in shape at each point of the 3D surface. The aim of this study was to determine whether 3D shape descriptors derived from 3D scanning data can identify differences in foot morphology between children of different ages. Fifteen children were recruited from three age groups (2, 5, and 7 years of age). Both feet were scanned in bipedal stance, using the Artec Eva (Artec Group, Luxembourg, Luxembourg) hand-held scanner. Three dimensional shape descriptors were extracted from the 3D scans of the right foot, to create histograms for each age group and heat maps of representative participants for comparison. There were changes to the dorsal, medial and lateral surfaces of the feet with age. The surfaces became less round along with an increase in indented areas. This is supported by the heat maps which demonstrated that the surfaces of the anatomical landmarks (e.g. the malleoli and navicular tuberosity) became more rounded and protruding, with indented surfaces appearing around these landmarks. On the plantar surface, the concavity of the midfoot was evident and this concavity extended into the midfoot from the medial aspect as age increased. The findings of this study indicated that with increasing age the foot becomes thinner in 3D, with bony architecture emerging, and the medial longitudinal arch (MLA) increases in area and concavity. Three-dimensional shape descriptors have shown good potential for locating and quantifying changes in foot structure across childhood. Three-dimensional shape descriptor data will be beneficial for understanding more about foot development and quantifying changes over time

    Novel Approaches to the Representation and Analysis of 3D Segmented Anatomical Districts

    Get PDF
    Nowadays, image processing and 3D shape analysis are an integral part of clinical practice and have the potentiality to support clinicians with advanced analysis and visualization techniques. Both approaches provide visual and quantitative information to medical practitioners, even if from different points of view. Indeed, shape analysis is aimed at studying the morphology of anatomical structures, while image processing is focused more on the tissue or functional information provided by the pixels/voxels intensities levels. Despite the progress obtained by research in both fields, a junction between these two complementary worlds is missing. When working with 3D models analyzing shape features, the information of the volume surrounding the structure is lost, since a segmentation process is needed to obtain the 3D shape model; however, the 3D nature of the anatomical structure is represented explicitly. With volume images, instead, the tissue information related to the imaged volume is the core of the analysis, while the shape and morphology of the structure are just implicitly represented, thus not clear enough. The aim of this Thesis work is the integration of these two approaches in order to increase the amount of information available for physicians, allowing a more accurate analysis of each patient. An augmented visualization tool able to provide information on both the anatomical structure shape and the surrounding volume through a hybrid representation, could reduce the gap between the two approaches and provide a more complete anatomical rendering of the subject. To this end, given a segmented anatomical district, we propose a novel mapping of volumetric data onto the segmented surface. The grey-levels of the image voxels are mapped through a volume-surface correspondence map, which defines a grey-level texture on the segmented surface. The resulting texture mapping is coherent to the local morphology of the segmented anatomical structure and provides an enhanced visual representation of the anatomical district. The integration of volume-based and surface-based information in a unique 3D representation also supports the identification and characterization of morphological landmarks and pathology evaluations. The main research contributions of the Ph.D. activities and Thesis are: \u2022 the development of a novel integration algorithm that combines surface-based (segmented 3D anatomical structure meshes) and volume-based (MRI volumes) information. The integration supports different criteria for the grey-levels mapping onto the segmented surface; \u2022 the development of methodological approaches for using the grey-levels mapping together with morphological analysis. The final goal is to solve problems in real clinical tasks, such as the identification of (patient-specific) ligament insertion sites on bones from segmented MR images, the characterization of the local morphology of bones/tissues, the early diagnosis, classification, and monitoring of muscle-skeletal pathologies; \u2022 the analysis of segmentation procedures, with a focus on the tissue classification process, in order to reduce operator dependency and to overcome the absence of a real gold standard for the evaluation of automatic segmentations; \u2022 the evaluation and comparison of (unsupervised) segmentation methods, finalized to define a novel segmentation method for low-field MR images, and for the local correction/improvement of a given segmentation. The proposed method is simple but effectively integrates information derived from medical image analysis and 3D shape analysis. Moreover, the algorithm is general enough to be applied to different anatomical districts independently of the segmentation method, imaging techniques (such as CT), or image resolution. The volume information can be integrated easily in different shape analysis applications, taking into consideration not only the morphology of the input shape but also the real context in which it is inserted, to solve clinical tasks. The results obtained by this combined analysis have been evaluated through statistical analysis

    Intraoperative ultrasound in brain tumor surgery: A review and implementation guide.

    Get PDF
    Accurate and reliable intraoperative neuronavigation is crucial for achieving maximal safe resection of brain tumors. Intraoperative MRI (iMRI) has received significant attention as the next step in improving navigation. However, the immense cost and logistical challenge of iMRI precludes implementation in most centers worldwide. In comparison, intraoperative ultrasound (ioUS) is an affordable tool, easily incorporated into existing theatre infrastructure, and operative workflow. Historically, ultrasound has been perceived as difficult to learn and standardize, with poor, artifact-prone image quality. However, ioUS has dramatically evolved over the last decade, with vast improvements in image quality and well-integrated navigation tools. Advanced techniques, such as contrast-enhanced ultrasound (CEUS), have also matured and moved from the research field into actual clinical use. In this review, we provide a comprehensive and pragmatic guide to ioUS. A suggested protocol to facilitate learning ioUS and improve standardization is provided, and an outline of common artifacts and methods to minimize them given. The review also includes an update of advanced techniques and how they can be incorporated into clinical practice

    Deep and superficial amygdala nuclei projections revealed in vivo by probabilistic tractography

    Get PDF
    Copyright © 2011 Society for Neuroscience and the authors. The The Journal of Neuroscience uses a Creative Commons Attribution-NonCommercial-ShareAlike licence: http://creativecommons.org/licenses/by-nc-sa/4.0/.Despite a homogenous macroscopic appearance on magnetic resonance images, subregions of the amygdala express distinct functional profiles as well as corresponding differences in connectivity. In particular, histological analysis shows stronger connections for superficial (i.e., centromedial and cortical), compared with deep (i.e., basolateral and other), amygdala nuclei to lateral orbitofrontal cortex and stronger connections of deep compared with superficial, nuclei to polymodal areas in the temporal pole. Here, we use diffusion weighted imaging with probabilistic tractography to investigate these connections in humans. We use a data-driven approach to segment the amygdala into two subregions using k-means clustering. The identified subregions are spatially contiguous and their location corresponds to deep and superficial nuclear groups. Quantification of the connection strength between these amygdala clusters and individual target regions corresponds to qualitative histological findings in non-human primates, indicating such findings can be extrapolated to humans. We propose that connectivity profiles provide a potentially powerful approach for in vivo amygdala parcellation and can serve as a guide in studies that exploit functional and anatomical neuroimaging.The Wellcome Trust, a Max Planck Research Award and Swiss National Science Foundation

    The use of 3D surface scanning for the measurement and assessment of the human foot

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>A number of surface scanning systems with the ability to quickly and easily obtain 3D digital representations of the foot are now commercially available. This review aims to present a summary of the reported use of these technologies in footwear development, the design of customised orthotics, and investigations for other ergonomic purposes related to the foot.</p> <p>Methods</p> <p>The PubMed and ScienceDirect databases were searched. Reference lists and experts in the field were also consulted to identify additional articles. Studies in English which had 3D surface scanning of the foot as an integral element of their protocol were included in the review.</p> <p>Results</p> <p>Thirty-eight articles meeting the search criteria were included. Advantages and disadvantages of using 3D surface scanning systems are highlighted. A meta-analysis of studies using scanners to investigate the changes in foot dimensions during varying levels of weight bearing was carried out.</p> <p>Conclusions</p> <p>Modern 3D surface scanning systems can obtain accurate and repeatable digital representations of the foot shape and have been successfully used in medical, ergonomic and footwear development applications. The increasing affordability of these systems presents opportunities for researchers investigating the foot and for manufacturers of foot related apparel and devices, particularly those interested in producing items that are customised to the individual. Suggestions are made for future areas of research and for the standardization of the protocols used to produce foot scans.</p

    In-Vivo Investigation of the Medial Longitudinal Arch of the Foot and Orthotic Interactions using Bi-Planar Fluoroscopy

    Get PDF
    Orthotic devices are a conservative treatment for common disorders of the foot and ankle such as pes planus and pes cavus. It is thought that orthotics change the kinematics of the foot by applying forces and constraint on the plantar surface, which can act to change body biomechanics and correct for malalignment in the legs and trunk. This thesis compares the angle of the medial longitudinal arch (MLA) between three foot types: pes planus (low arch), pes cavus (high arch) and normal arch, during barefoot and shoed walking, and walking with orthotics. In-vivo bi-planar fluoroscopy was used with markerless radiostereometric analysis (RSA) to measure an angle that defines the MLA with the greatest accuracy to date. MLA angles were significantly smaller (
    • …
    corecore