109 research outputs found
A low-complexity turbo decoder architecture for energy-efficient wireless sensor networks
Turbo codes have recently been considered for energy-constrained wireless communication applications, since they facilitate a low transmission energy consumption. However, in order to reduce the overall energy consumption, Look-Up- Table-Log-BCJR (LUT-Log-BCJR) architectures having a low processing energy consumption are required. In this paper, we decompose the LUT-Log-BCJR architecture into its most fundamental Add Compare Select (ACS) operations and perform them using a novel low-complexity ACS unit. We demonstrate that our architecture employs an order of magnitude fewer gates than the most recent LUT-Log-BCJR architectures, facilitating a 71% energy consumption reduction. Compared to state-of- the-art Maximum Logarithmic Bahl-Cocke-Jelinek-Raviv (Max- Log-BCJR) implementations, our approach facilitates a 10% reduction in the overall energy consumption at ranges above 58 m
Reconfigurable Turbo/Viterbi Channel Decoder in the Coarse-Grained Montium Architecture
Mobile wireless communication systems become multi-mode systems. These future mobile systems employ multiple wireless communication standards, which are different by means of algorithms that are used to implement the baseband processing and the channel decoding. Efficient implementation of multiple wireless standards in mobile terminals requires energy-efficient and flexible hardware. We propose to implement both the baseband processing and channel decoding in a heterogeneous reconfigurable system-on-chip. The system-on-chip contains many processing elements of different granularities, which includes our coarse-grained reconfigurable MONTIUM architecture. We already showed the feasibility to implement the baseband processing of OFDM and WCDMA based communication systems in the MONTIUM. In this paper we implemented two kinds of channel decoders in the same MONTIUM architecture: Viterbi and Turbo decoding
Recommended from our members
Survey of unified approaches to integrated-service networks
The increasing demand for communication services, coupled with recent technological advances in communication media and switching techniques, has resulted in a proliferation of new and expanded services. Currently, networks are needed which can transmit voice, data, and video services in an application-independent fashion. Unified approaches employ a single switching technique across the entire network bandwidth, thus, allowing services to be switched in an application-independent manner. This paper presents a taxonomy of integrated-service networks including a look at N-ISDN, while focusing on unified approaches to integrated-service networks.The two most promising unified approaches are burst and fast packet switching. Burst switching is a circuit switching-based approach which allocates channel bandwidth to a connection only during the transmission of "bursts" of information. Fast packet switching is a packet switching-based approach which can be characterized by very high transmission rates on network links and simple, hardwired protocols which match the rapid channel speed of the network. Both approaches are being proposed as possible implementations for integrated-service networks. We survey these two approaches, and also examine the key performance issues found in fast packet switching. We then present the results of a simulation study of a fast packet switching network
A flexible hardware architecture for 2-D discrete wavelet transform: design and FPGA implementation
The Discrete Wavelet Transform (DWT) is a powerful signal processing tool that has recently gained widespread acceptance in the field of digital image processing. The multiresolution analysis provided by the DWT addresses the shortcomings of the Fourier Transform and its derivatives. The DWT has proven useful in the area of image compression where it replaces the Discrete Cosine Transform (DCT) in new JPEG2000 and MPEG4 image and video compression standards. The Cohen-Daubechies-Feauveau (CDF) 5/3 and CDF 9/7 DWTs are used for reversible lossless and irreversible lossy compression encoders in the JPEG2000 standard respectively. The design and implementation of a flexible hardware architecture for the 2-D DWT is presented in this thesis. This architecture can be configured to perform both the forward and inverse DWT for any DWTfamily, using fixed-point arithmetic and no auxiliary memory. The Lifting Scheme method is used to perform the DWT instead of the less efficient convolution-based methods. The DWT core is modeled using MATLAB and highly parameterized VHDL. The VHDL model is synthesized to a Xilinx FPGA to prove hardware functionality. The CDF 5/3 and CDF 9/7 versions of the DWT are both modeled and used as comparisons throughout this thesis. The DWT core is used in conjunction with a very simple image denoising module to demonstrate the potential of the DWT core to perform image processing techniques. The CDF 5/3 hardware produces identical results to its theoretical MATLAB model. The fixed point CDF 9/7 deviates very slightly from its floating-point MATLAB model with a ~59dB PSNR deviation for nine levels of DWT decomposition. The execution time for performing both DWTs is nearly identical at -14 clock cycles per image pixel for one level of DWT decomposition. The hardware area generated for the CDF 5/3 is -16,000 gates using only 5% of the Xilinx FPGA hardware area, 2.185 MHz maximum clock speed and 24 mW power consumption. The simple wavelet image denoising techniques resulted in cleaned images up to -27 PSNR
A novel approach for the hardware implementation of a PPMC statistical data compressor
This thesis aims to understand how to design high-performance compression
algorithms suitable for hardware implementation and to provide hardware support for
an efficient compression algorithm.
Lossless data compression techniques have been developed to exploit the available
bandwidth of applications in data communications and computer systems by reducing
the amount of data they transmit or store. As the amount of data to handle is ever
increasing, traditional methods for compressing data become· insufficient. To
overcome this problem, more powerful methods have been developed. Among those
are the so-called statistical data compression methods that compress data based on
their statistics. However, their high complexity and space requirements have prevented
their hardware implementation and the full exploitation of their potential benefits.
This thesis looks into the feasibility of the hardware implementation of one of these
statistical data compression methods by exploring the potential for reorganising and
restructuring the method for hardware implementation and investigating ways of
achieving efficient and effective designs to achieve an efficient and cost-effective
algorithm. [Continues.
New VLSI design of a MAP/BCJR decoder.
Any communication channel suffers from different kinds of noises. By employing forward error correction (FEC) techniques, the reliability of the communication channel can be increased. One of the emerging FEC methods is turbo coding (iterative coding), which employs soft input soft output (SISO) decoding algorithms like maximum a posteriori (MAP) algorithm in its constituent decoders. In this thesis we introduce a design with lower complexity and less than 0.1dB performance loss compare to the best performance observed in Max-Log-MAP algorithm. A parallel and pipeline design of a MAP decoder suitable for ASIC (Application Specific Integrated Circuits) is used to increase the throughput of the chip. The branch metric calculation unit is studied in detail and a new design with lower complexity is proposed. The design is also flexible to communication block sizes, which makes it ideal for variable frame length communication systems. A new even-spaced quantization technique for the proposed MAP decoder is utilized. Normalization techniques are studied and a suitable technique for the Max-Log-MAP decoder is explained. The decoder chip is synthesized and implemented in a 0.18 mum six-layer metal CMOS technology. (Abstract shortened by UMI.)Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .S23. Source: Masters Abstracts International, Volume: 43-05, page: 1783. Adviser: Majid Ahmadi. Thesis (M.A.Sc.)--University of Windsor (Canada), 2004
- …