720 research outputs found
Resina acrilica para restauração direta : estudo da contração volumetrica
Orientador: Dalton Belmudes de ToledoTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de PiracicabaResumo: Não informadoAbstract: Not informed.DoutoradoDentística OperatoóriaDoutor em Ciência
Nova Aquilae 1918 (V603 Aql) Faded by 0.44 mag/century from 1938-2013
We present the light curve of the old nova V603 Aql (Nova Aql 1918) from
1898-1918 and 1934-2013 using 22,721 archival magnitudes. All of our magnitudes
are either in, or accurately transformed into, the Johnson and
magnitude systems. This is vital because offsets in old sequences and the
visual-to- transformation make for errors from 0.1-1.0 magnitude if not
corrected. Our V603 Aql light curve is the first time that this has been done
for any nova. Our goal was to see the evolution of the mass accretion rate on
the century time scale, and to test the long-standing prediction of the
Hibernation model that old novae should be fading significantly in the century
after their eruption is long over. The 1918 nova eruption was completely
finished by 1938 when the nova decline stopped, and when the star had faded to
fainter than its pre-nova brightness of mag. We find that
the nova light from 1938-2013 was significantly fading, with this being seen
consistently in three independent data sets (the Sonneberg plates in , the
AAVSO light curve, and the non-AAVSO light curve). We find that V603
Aql is declining in brightness at an average rate of mag per
century since 1938. This work provides remarkable confirmation of an important
prediction of the Hibernation model.Comment: 13 pages, 1 figure, 2 electronic online data tables, Accepted for
publication ApJLet
ANNA MARÍA PRAT I TRABAL (1938-2013)
El siguiente artículo se adjunta en memoria de la Sra. Ana M. Prat. Corresponde a un resumen bibliográfico escrito por Doña Marcela Aguirre Cabrera, Coordinadora del programa SciELO Chile.La Sra. Ana María Prat colaboró desde un principio en la implementación y certificación de la revista JOTMI. Recordaremos con mucho cariño sus consejos y evaluaciones.El siguiente artículo se adjunta en memoria de la Sra. Ana M. Prat. Corresponde a un resumen bibliográfico escrito por Doña Marcela Aguirre Cabrera, Coordinadora del programa SciELO Chile.La Sra. Ana María Prat colaboró desde un principio en la implementación y certificación de la revista JOTMI. Recordaremos con mucho cariño sus consejos y evaluaciones
Ймовірнісна модель показників деформування колінчастих валів унаслідок відновлення їхніх шийок наплавленням
The authors have studied the actual issue of resource recovery of car engine's crankshafts where various ways of their necks swelling is widely used. In the course of the research we have revealed that the best results according to the hardness of the swollen material in the process of crankshafts restoration without the application of heat treatment are obtained during swelling with a spring wire under AN 348A flux for metal doping with carbon and chromium through flux. We have defined that during the swelling of the component under the flux there is a significant heating of the welded areas, which extends to areas that are not submerged. This is facilitated by the linear and volumetric expansion of the heated parts of the component, and also the deposition of solidified molten metal and the structural changes and transformations that occur therein. This is revealed to be accompanied by the occurrence of tensile or compressive stresses in the welded and basic metal, under the influence of which the initial geometric shape of the component changes, that is, it deforms. The deformation of the component may also occur due to various factors such as bending, tilt or twisting in the clamping device, and also excessive compression in the centers of the machine or thermal expansion in the process of swelling, etc. When the quantities of deformations are larger than permissible, the components are subject to correction or disposal. Crankshaft deformation refers to random processes that are studied by methods of mathematical statistics. For this purpose, a sample of the array of 67 restored ZMZ-511.10 crankshafts was inspected at the service center of LV-TRANS-AUTO LLC, Dublyany, which resulted in the grouping of empirical data into 7 intervals. The density of the empirical distribution of the random variable probability and the probability frequency are determined. Some numerical characteristics of random variables such as mathematical expectation, dispersion and mean square deviation are obtained. On the basis of statistical processing, we detected the regularities of the random variable change (deformations) through the construction of the empirical distribution and the theoretical distribution curve, which is subject to the normal law (the Gauss curve). The verification of the agreement of the theoretical and empirical distribution by the Pearson's criterion showed a satisfactory coincidence. The obtained research results will allow improving the route technology for restoration of automobile engine crankshafts.Для відновлення ресурсу колінчастих валів автомобільних двигунів широко застосовують різні способи наплавлення їхніх шийок. Встановлено, що найкращі результати за твердістю наплавленого матеріалу в разі відновлення колінчастих валів, без застосування термічного оброблення, отримують під час наплавлення пружинним дротом під флюсом АН 348А за легування металу вуглецем та хромом через флюс. Виявлено, що під час наплавлення деталі під флюсом відбувається значне нагрівання наплавлених ділянок, яке поширюється також на ділянки, що не піддаються наплавленню. Цьому сприяють лінійні та об'ємні розширення нагрітих ділянок деталі, осадження затвердлого розплавленого металу та перебіг структурних змін і перетворень у ньому. Як з'ясувалося, це супроводжується появою у наплавленому та основному металі розтягувальних або стискувальних напружень, під дією яких змінюється початкова геометрична форма деталі, тобто вона деформується. Встановлено, що деформування деталі може виникнути також і від згину, перекосу або її скручування у затискному пристрої, від надмірного стиснення у центрах верстату або від теплового видовження у процесі наплавлення тощо. У випадку невеликих величин деформування правлення колінчастих валів після наплавлення не обов'язкове, оскільки їхня співвісність за корінними шийками може бути досягнута в процесі механічного оброблення. Для цього необхідно спочатку шліфувати всі шатунні шийки й в останню чергу – корінні. За величин деформувань, більших від допустимих, деталі піддають правленню або утилізуванню. Для оцінки впливу на величину деформування колінчастих валів двигунів ЗМЗ 511.10 після їхнього відновлення наплавленням і подальшого шліфування побудовано ймовірнісну модель. На основі статистичного опрацювання результатів досліджень встановлено закономірності зміни випадкової величини (деформувань) за допомогою побудови емпіричного розподілу і кривої теоретичного розподілу, які підпорядковуються нормальному закону (Крива Гауса). Перевірка узгодження теоретичного та емпіричного розподілів за критерієм Пірсона показала задовільний збіг
La huella de tu cruz. La cofradía de Jesús camino del Calvario a lo largo de su historia (1938-2013) [Reseña]
Reseña de Fernando Galtier Martí-Manuel R. Pérez Giménez, "La huella de tu cruz.
La cofradía de Jesús camino del Calvario a lo largo de su historia (1938-2013)",
Mira Editores, Zaragoza 2013, 200 pp
Un número necesario : Gloria Pampillo (1938-2013)
Cuando nos propusieron presentar para el VII Congreso Internacional Cátedra UNESCO, Lectura y escritura: continuidades, rupturas y reconstrucciones, una mesa temática en homenaje a Gloria Pampillo, nos pusieron ante un quehacer paradójico. La pérdida de Gloria era muy reciente y era conmovedor recorrer sus escritos, sus apuntes de cátedra, sus publicaciones didácticas y su narrativa ficcional, así como nuestros propios trabajos anotados por quien fue maestra, guía y mentora de nuestro recorrido académico y literario. Más aun, que no fuera su voz - brillante y melodiosa- la que nos aconsejara o sugiriera ideas para organizarla. Al mismo tiempo, sentíamos la responsabilidad de recuperar el conjunto de su obra intelectual y artística. Por esta razón decidimos asumir el compromiso y convocamos a los colegas con quienes compartimos la cátedra fundada por Gloria y a otros cuyo recorrido también estaba ligado a la escritora. La respuesta fue inmediata y nutrida por lo que debimos hacer dos mesas. El producto de esa convocatoria es lo que presentamos en este número de Traslaciones
INDONESIAN ISLAMIC MOVEMENT OF WOMEN: A STUDY OF FATAYAT MUSLIMAT NU (1938-2013)
Abstract: The purpose of this article is to examine the dynamics of Indonesian Muslim women's movement of a socio-historical study of the Moslem-Fatayat NU during the period 1938-2013. The socio-historical, Indonesian Islamic women's movement can exist not only from tahrirul mar'ah movement but also the influence of the feminist movement that developed in the Western world. The development of Moslem-Fatayat plays a strategic role in social transformation efforts. Transformation through a process of awareness that ran in "evolutionary manner" rather than radical which prescribes to actualization of classical islamic text book. The most rapid development Muslimat NU-Fatayat marked by: "return to khitah 1926" and Lombok General Assembly 1997 which let them out of practical politics. In addition, the development of Moslem organization backed by edict-Fatayat Lombok 1997, which resulted in the "position of women in Islam" or al-mar'ah fi al-Islam that Islam recognizes equal rights between man and woman in the realm of religious order vance. Abstrak: Pergerakan Perempuan Islam Indonesia: Studi Tentang Fatayat Muslimat NU 1938-2013. Artikel ini bertujuan untuk meneliti dinamika pergerakan Muslimat-Fatayat NU selama periode 1938-2013 dilihat dari pendekatan sosial historis. Pergerakan perempuan Muslim Indonesia ada tidak hanya melalui pergerakan tahrîr al-mar‘ah, tapi juga dampak dari perkembangan pergerakan perempuan Muslim di dunia Barat. Perkembangan Muslimat-Fatayat memegang peranan penting dalam upaya transformasi sosial. Transformasi dilakukan melalui proses kesadaran melalui “cara evolusi”, bukan radikal yang mengharuskan aktualisasi buku-buku Islam klasik. Perkembangan paling pesat dari Muslimat NU-Fatayat ditandai oleh “kembali ke khitah 1926” dan Majelis Umum Lombok 1997 yang membawa mereka keluar dari praktik politik. Sebagai tambahan, perkembangan organisasi Muslim telah kembali dengan adanya dekrit-fatayat Lombok 1997, yang menghasilkan “posisi perempuan dalam Islam” atau al-mar‘ah fi al-Islâm bahwa Islam mengakui hak antara laki-laki dan perempuan dalam bidang agama sama. Keywords: Indonesia, perempuan Muslim, NU, Fatayat Muslimat N
- …