Characteristics of grounding performance at Taman Bukit Perdana

Grounding system is one of the important part during installation of power systems. The function of grounding system is to enable protection to the power system in case of any current leakage or lightning strike. A grounding system will disconnect the circuit as soon as the fault current flows through the earth [1]. Every potential connection or equipment that may cause the current leakage must be grounded. In a simple way, it can be defined as the system to protect and stabilize the operation for human and equipment during fault conditions

Metallic Triple Beam Resonator with Thick-film Printed Drive and Pickup

A triple beam resonator fabricated in 430S17 stainless steel with thick-film piezoelectric elements to drive and detect the vibrations is presented. The resonator substrate was fabricated by a simultaneous, double-sided photochemical etching technique and the thick-film piezoelectric elements were deposited by a standard screen-printing process. The combination of these two batch-fabrication processes provides the opportunity for mass production of the device at low cost. The resonator, a dynamically balanced triple beam tuning fork (TBTF) structure 23.5 mm long and 6.5 mm wide, has a favoured mode at 4.96 kHz with a Q-factor of 3630 operating in air

Method for making conductors for ferrite memory arrays

The ferrite memory arrays are made from pre-formed metal conductors for the ferrite arrays. The conductors are made by forming a thin sheet of a metallizing paste of metal alloy powder, drying the paste layer, bisque firing the dried sheet at a first temperature, and then punching the conductors from the fired sheet. During the bisque firing, the conductor sheet shrinks to 58 percent of its pre-fired volume and the alloy particles sinter together. The conductors are embedded in ferrite sheet material and finally fired at a second higher temperature during which firing the conductors shrink approximately the same degree as the ferrite material

Content-based indexing of low resolution documents

In any multimedia presentation, the trend for attendees taking pictures of slides that interest them during the presentation using capturing devices is gaining popularity. To enhance the image usefulness, the images captured could be linked to image or video database. The database can be used for the purpose of file archiving, teaching and learning, research and knowledge management, which concern image search. However, the above-mentioned devices include cameras or mobiles phones have low resolution resulted from poor lighting and noise. Content-Based Image Retrieval (CBIR) is considered among the most interesting and promising fields as far as image search is concerned. Image search is related with finding images that are similar for the known query image found in a given image database. This thesis concerns with the methods used for the purpose of identifying documents that are captured using image capturing devices. In addition, the thesis also concerns with a technique that can be used to retrieve images from an indexed image database. Both concerns above apply digital image processing technique. To build an indexed structure for fast and high quality content-based retrieval of an image, some existing representative signatures and the key indexes used have been revised. The retrieval performance is very much relying on how the indexing is done. The retrieval approaches that are currently in existence including making use of shape, colour and texture features. Putting into consideration these features relative to individual databases, the majority of retrievals approaches have poor results on low resolution documents, consuming a lot of time and in the some cases, for the given query image, irrelevant images are obtained. The proposed identification and indexing method in the thesis uses a Visual Signature (VS). VS consists of the captures slides textual layout’s graphical information, shape’s moment and spatial distribution of colour. This approach, which is signature-based are considered for fast and efficient matching to fulfil the needs of real-time applications. The approach also has the capability to overcome the problem low resolution document such as noisy image, the environment’s varying lighting conditions and complex backgrounds. We present hierarchy indexing techniques, whose foundation are tree and clustering. K-means clustering are used for visual features like colour since their spatial distribution give a good image’s global information. Tree indexing for extracted layout and shape features are structured hierarchically and Euclidean distance is used to get similarity image for CBIR. The assessment of the proposed indexing scheme is conducted based on recall and precision, a standard CBIR retrieval performance evaluation. We develop CBIR system and conduct various retrieval experiments with the fundamental aim of comparing the accuracy during image retrieval. A new algorithm that can be used with integrated visual signatures, especially in late fusion query was introduced. The algorithm has the capability of reducing any shortcoming associated with normalisation in initial fusion technique. Slides from conferences, lectures and meetings presentation are used for comparing the proposed technique’s performances with that of the existing approaches with the help of real data. This finding of the thesis presents exciting possibilities as the CBIR systems is able to produce high quality result even for a query, which uses low resolution documents. In the future, the utilization of multimodal signatures, relevance feedback and artificial intelligence technique are recommended to be used in CBIR system to further enhance the performance

Lifetime performance characteristics of screen-printed potentiometric Ag/AgCl chloride sensors

Ag/AgCl chloride sensors were fabricated using thick-film technology. A number of different formulations were prepared and chloride responses were investigated over time. Near Nernstian, identical responses were observed over the first 160 days with an average chloride sensitivity of -51.8 ± 0.4 mV per decade change in chloride concentration (pCl), irrespective of paste formulation. After 6- months continuous immersion in tap water, pastes formulated with a glass binder began to exhibit a loss in sensitivity whilst those formulated from a commercial thickfilm dielectric paste remained functional for the best part of a year. The difference is attributed to the inclusion of proprietary additives in the commercial paste aiding adhesion and minimising AgCl leaching

Development of technique for AR coating nickel and copper metallization of solar cells FPS project product development

Experimental matrices were conducted to determine a suitable firing schedule for fritless tin printing ink. considerable difficulties were encountered with oxidation. Best results were obtained with a firing cycle consisting of 400 C for 20 minutes in nitrogen followed by 5 minutes in air at 500 C. Elimination of oxidizing conditions impaired the adhesion of both tin and copper fritless printing inks, although adhesion of fritless copper inks was obtained when fired in nitrogen with slight oxidation

Current activities at IITRI on high- temperature protective coatings

Heat resistant protective coatings for use in liquid propellant rocket engine

Photoresist patterned thick-film piezoelectric elements on silicon

A fundamental limitation of screen printing is the achievable alignment accuracy and resolution. This paper presents details of a thick-resist process that improves both of these factors. The technique involves exposing/developing a thick resist to form the desired pattern and then filling the features with thick film material using a doctor blading process. Registration accuracy comparable with standard photolithographic processes has been achieved resulting in minimum feature sizes of <50 ?m and a film thickness of 100 ?m. Piezoelectric elements have been successfully poled on a platinised silicon wafer with a measured d 33 value of 60 pCN?1

Fabrication, characterization and photoelectrochemical behavior of Fe2TiO5 screen printed thick films

Pseudobrookite paste was composed of a mixture of starting nanopowders of hematite (α-Fe2O3) and anatase (TiO2) in the molar ratio 1:1.5, organic vehicle and glass frit. The paste was screen printed on on fluorine-doped tin oxide (FTO) glass substrate using screen printing technology. Structural, morphological and optical studies have been carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM). The photo-electrochemical performance of Fe2TiO5 screen printed thick film was examined under xenon lamp illumination in 1 M NaOH electrolyte

High temperature silicon carbide impregnated insulating fabrics

High temperature insulating articles having improved performance characteristics are described. The articles comprise fabrics of closely woven refractory or heat resistant fibers having particles of silicon carbide dispersed at least partially through the fabric and bonded to the fibers with an emulsifiable polyethylene wax. Such articles exhibit significantly increased high temperature emittance characteristics and an improved retention of integrity and flexibility after prolonged exposure to high temperature