General methodology for exergy balance in ProSimPlus® process simulator

This paper presents a general methodology for exergy balance in chemical and thermal processes integrated in ProSimPlus® as a well-adopted process simulator for energy efficiency analysis. In this work, as well as using the general expressions for heat and work streams, all of exergy balance is presented within only one software in order to fully automate exergy analysis. In addition, after exergy balance, the essential elements such as source of irreversibility for exergy analysis are presented to help the user for modifications on either process or utility system. The applicability of the proposed methodology in ProSimPlus® is shown through a simple scheme of Natural Gas Liquids (NGL) recovery process and its steam utility system. The methodology does not only provide the user with necessary exergetic criteria to pinpoint the source of exergy losses, it also helps the user to find the way to reduce the exergy losses. These features of the proposed exergy calculator make it preferable for its implementation in ProSimPlus® to define the most realistic and profitable retrofit projects on the existing chemical and thermal plants

Exergy analysis of a PWR nuclear steam supply system – Part I, general theoretical model

The paper provides an alternative, novel methodology to perform the exergetic analysis of a Pressurized Nuclear Reactor (PWR) based on the strictest definition of fission temperature to get to a careful evaluation of Exergy Destruction and exergetic Efficiency of the component. Up today, the exegetic analyses of Nuclear Power Plants (NPP) have been based on the assumption that Fission Exergy and Fission Energy are almost the same having assumed Carnot Factor almost equal to 1 as Tfiss >>T0. This assumption is based on some simplified hypotheses concerning fission temperature as applied in the definition of the Fission Exergy itself, whose value, to the best knowledge of the authors, was never modeled. On the contrary, in the first part of the paper, the authors present the results of an ongoing research, just aimed at evaluating the Exergy efficiency of the heat exchange in a PWR reactor, whose first results were already presented in [1], based on the most detailed modeling of Tfiss. The modeling, referring to a steady-state operational mode of the Reactor, takes into account all heat transfer phenomena between nuclear fuel UO2, its Zircaloy clad, cooling water, vessel material and the external environment. In the second part of the paper, the Exergy analysis is extended to all main Reactor Cooling System components (Vertical recirculating type Steam Generator, primary coolant pump and piping) with the aim to compare the Exergy Destructions and exergetic Efficiencies of the RPV with those of the other components of the Nuclear Steam Supply System, NSSS. In the Part II of the same paper,, "Exergy Analysis of a PWR Nuclear Steam Supply System - II part: a case study ", a test case is exemplified with the aim to compare the results obtained applying the methodology in question with those obtained applying the most established methodology adopted by other authors

Steady state simulation and exergy analysis of supercritical coal-fired power plant with CO₂ capture

Integrating a power plant with CO₂ capture incurs serious efficiency and energy penalty due to use of energy for solvent regeneration in the capture process. Reducing the exergy destruction and losses associated with the power plant systems can improve the rational efficiency of the system and thereby reducing energy penalties. This paper presents steady state simulation and exergy analysis of supercritical coal-fired power plant (SCPP) integrated with post-combustion CO₂ capture (PCC). The simulation was validated by comparing the results with a greenfield design case study based on a 550 MWe SCPP unit. The analyses show that the once-through boiler exhibits the highest exergy destruction but also has a limited influence on fuel-saving potentials of the system. The turbine subsystems show lower exergy destruction compared to the boiler subsystem but more significance in fuel-saving potentials of the system. Four cases of the integrated SCPP-CO2 capture configuration was considered for reducing thermodynamic irreversibilities in the system by reducing the driving forces responsible for the CO₂ capture process: conventional process, absorber intercooling (AIC), split-flow (SF), and a combination of absorber intercooling and split-flow (AIC + SF). The AIC + SF configuration shows the most significant reduction in exergy destruction when compared to the SCPP system with conventional CO₂ capture. This study shows that improvement in turbine performance design and the driving forces responsible for CO₂ capture (without compromising cost) can help improve the rational efficiency of the integrated system

Exergy analysis of a solar photovoltaic module

PV energy is the direct conversion of solar radiation into electricity. In this paper, an analysis of the influence of parameters such as global irradiance or temperature in the performance of a PV installation has been carried out. A PV module was installed in a building at the University of Málaga, and these parameters were experimentally determined for different days and different conditions of irradiance and temperature. Moreover, IV curves were obtained under these conditions to know the open-circuit voltage and the short-circuit current of the module. With this information, and using the first law of thermodynamics, an energy analysis was performed to determine the energy efficiency of the installation. Similarly, using the second law of thermodynamics, an exergy analysis is used to obtain the exergy efficiency. The results show that the energy efficiency varies between 10% and 12% and the exergy efficiency between 14% and 17%. It was concluded that the exergy analysis is more suitable for studying the performance, and that only electric exergy must be considered as useful exergy. This exergy efficiency can be improved if heat is removed from the PV module surface, and an optimal temperature is reached.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Evaluating the Rationale for Folding Wing Tips Comparing the Exergy and Breguet Approaches

The design and development processes for future aircraft aims to address the environmental and efficiency challenges needed to facilitate the engineering of concepts that are far more integrated and require a multidisciplinary approach. This study investigates the benefit of incorporating span extension wing tips onto future aircraft configurations as a method of providing improved aerodynamic efficiency, whilst allowing the extension to fold on the ground to meet airport gate size constraints. Although the actuated wing tips are not studied in detail, the focus of this study is to compare two different methods of analysis that can be used to identify the benefit and limitations of adding such devices. The two methods considered are a quasi-steady implicit energy analysis based on the Breguet Range Equation and an explicit energy analysis based on the first and second laws of thermodynamics known as Exergy Analysis. It has been found that both methods provide agreeable results and have individual merits. The Breguet Range Equation can provide quick results in early design, whilst the Exergy Analysis has been found to be far more extensive and allows the complete dynamic behaviour of the aircraft to be assessed through a single metric. Hence, allowing comparison of losses from multiple subsystems

Advanced Exergy Analysis in the Dynamic Framework for Assessing Building Thermal Systems

This work applies the Dynamic Advanced Exergy Analysis (DAEA) to a heating and domestic hot water (DHW) facility supplied by a Stirling engine and a condensing boiler. For the first time, an advanced exergy analysis using dynamic conditions is applied to a building energy system. DAEA provides insights on the components’ exergy destruction (ED) by distinguishing the inefficiencies that can be prevented by improving the quality (avoidable ED) and the ones constrained because of technical limitations (unavoidable ED). ED is related to the inherent inefficiencies of the considered element (endogenous ED) and those coming from the interconnections (exogenous ED). That information cannot be obtained by any other approach. A dynamic calculation within the experimental facility has been performed after a component characterization driven by a new grey-box modelling technique, through TRNSYS and MATLAB. Novel solutions and terms of ED are assessed for the rational implementation of the DAEA in building energy installations. The influence of each component and their interconnections are valuated in terms of exergy destruction for further diagnosis and optimization purposes.BMWi, 03ET1218B, Anwendung exergiebasierter Methoden zur Verbesserung von Gebäudeenergiesysteme