9 research outputs found
NC-G-SIM: A Parameterized Generic Simulator for 2D-Mesh, 3D-Mesh
As chip density keeps doubling during each course of generation, the use of NoC has become an integral part of modern microprocessors and a very prevalent architectural feature of all types of SoCs. To meet the ever expanding communication challenges, diverse and novel NoC solutions are being developed which rely on accurate modeling and simulations to evaluate the impact and analyze their performances. Consequently, this aggravates the need to rely on simulation tools to probe and optimize these NoC architectures. In this work, we present NC-G-SIM (Network on Chip-Generic-SIMulator), a highly flexible, modular, cycle-accurate, configurable simulator for NoCs. To make NC-G-SIM suitable for advanced NoC exploration, it is made highly generic that supports extensive range of cores in any kind of topology whether 2D, 3D or irregular. Simulation results have been evaluated in terms of latencies, throughput and the amount of energy consumed during the simulation period at different levels
VLSI implementation of a multi-mode turbo/LDPC decoder architecture
Flexible and reconfigurable architectures have gained wide popularity in the communications field. In particular, reconfigurable architectures for the physical layer are an attractive solution not only to switch among different coding modes but also to achieve interoperability. This work concentrates on the design of a reconfigurable architecture for both turbo and LDPC codes decoding. The novel contributions of this paper are: i) tackling the reconfiguration issue introducing a formal and systematic treatment that, to the best of our knowledge, was not previously addressed; ii) proposing a reconfigurable NoCbased turbo/LDPC decoder architecture and showing that wide flexibility can be achieved with a small complexity overhead. Obtained results show that dynamic switching between most of considered communication standards is possible without pausing the decoding activity. Moreover, post-layout results show that tailoring the proposed architecture to the WiMAX standard leads to an area occupation of 2.75 mm2 and a power consumption of 101.5 mW in the worst case
Energy Efficient Mapping in 3D Mesh Communication Architecture for NoC
By the end of this decade we will be entering into the era of thousand cores SoCs. 3D integration technologies have opened the door of new opportunities for NoC architecture design in SoCs providing higher efficiency compared to 2D integration by appropriately adjusting the increased path lengths of 2D NoC. The application to core mapping on NoC architecture can significantly affect the amount of system's dynamic communication energy consumption. The considerable amount of energy savings can be achieved by appropriately optimizing the application to core mapping in NoC architecture. This paper presents a Branch-and-Bound heuristic for smart application to core mapping in 3D Mesh NoC architecture. Experimental results show that proposed heuristic saves about 42%-55% and 19%-28% of dynamic communication energy consumption in comparison to random mapping in 3D NoC communication architecture and the energy aware-mapping in 2D NoC architecture of same size, respectively
Embedded dynamic programming networks for networks-on-chip
PhD ThesisRelentless technology downscaling and recent technological advancements
in three dimensional integrated circuit (3D-IC) provide a promising
prospect to realize heterogeneous system-on-chip (SoC) and homogeneous
chip multiprocessor (CMP) based on the networks-onchip
(NoCs) paradigm with augmented scalability, modularity and
performance. In many cases in such systems, scheduling and managing
communication resources are the major design and implementation
challenges instead of the computing resources. Past research
efforts were mainly focused on complex design-time or simple heuristic
run-time approaches to deal with the on-chip network resource
management with only local or partial information about the network.
This could yield poor communication resource utilizations and amortize
the benefits of the emerging technologies and design methods.
Thus, the provision for efficient run-time resource management in
large-scale on-chip systems becomes critical. This thesis proposes a
design methodology for a novel run-time resource management infrastructure
that can be realized efficiently using a distributed architecture,
which closely couples with the distributed NoC infrastructure. The
proposed infrastructure exploits the global information and status
of the network to optimize and manage the on-chip communication
resources at run-time.
There are four major contributions in this thesis. First, it presents a
novel deadlock detection method that utilizes run-time transitive closure
(TC) computation to discover the existence of deadlock-equivalence
sets, which imply loops of requests in NoCs. This detection scheme,
TC-network, guarantees the discovery of all true-deadlocks without
false alarms in contrast to state-of-the-art approximation and heuristic
approaches. Second, it investigates the advantages of implementing
future on-chip systems using three dimensional (3D) integration and
presents the design, fabrication and testing results of a TC-network
implemented in a fully stacked three-layer 3D architecture using a
through-silicon via (TSV) complementary metal-oxide semiconductor
(CMOS) technology. Testing results demonstrate the effectiveness
of such a TC-network for deadlock detection with minimal computational
delay in a large-scale network. Third, it introduces an adaptive
strategy to effectively diffuse heat throughout the three dimensional
network-on-chip (3D-NoC) geometry. This strategy employs a dynamic
programming technique to select and optimize the direction of data
manoeuvre in NoC. It leads to a tool, which is based on the accurate
HotSpot thermal model and SystemC cycle accurate model, to simulate
the thermal system and evaluate the proposed approach. Fourth, it
presents a new dynamic programming-based run-time thermal management
(DPRTM) system, including reactive and proactive schemes, to
effectively diffuse heat throughout NoC-based CMPs by routing packets
through the coolest paths, when the temperature does not exceed
chip’s thermal limit. When the thermal limit is exceeded, throttling is
employed to mitigate heat in the chip and DPRTM changes its course
to avoid throttled paths and to minimize the impact of throttling on
chip performance.
This thesis enables a new avenue to explore a novel run-time resource
management infrastructure for NoCs, in which new methodologies
and concepts are proposed to enhance the on-chip networks for
future large-scale 3D integration.Iraqi Ministry of Higher Education and Scientific Research (MOHESR)
High-level services for networks-on-chip
Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed
Physical parameter-aware Networks-on-Chip design
PhD ThesisNetworks-on-Chip (NoCs) have been proposed as a scalable, reliable
and power-efficient communication fabric for chip multiprocessors
(CMPs) and multiprocessor systems-on-chip (MPSoCs). NoCs determine
both the performance and the reliability of such systems, with a
significant power demand that is expected to increase due to developments
in both technology and architecture. In terms of architecture, an
important trend in many-core systems architecture is to increase the
number of cores on a chip while reducing their individual complexity.
This trend increases communication power relative to computation
power. Moreover, technology-wise, power-hungry wires are dominating
logic as power consumers as technology scales down. For these
reasons, the design of future very large scale integration (VLSI) systems
is moving from being computation-centric to communication-centric.
On the other hand, chip’s physical parameters integrity, especially
power and thermal integrity, is crucial for reliable VLSI systems. However,
guaranteeing this integrity is becoming increasingly difficult with
the higher scale of integration due to increased power density and operating
frequencies that result in continuously increasing temperature
and voltage drops in the chip. This is a challenge that may prevent
further shrinking of devices. Thus, tackling the challenge of power
and thermal integrity of future many-core systems at only one level
of abstraction, the chip and package design for example, is no longer
sufficient to ensure the integrity of physical parameters. New designtime
and run-time strategies may need to work together at different
levels of abstraction, such as package, application, network, to provide
the required physical parameter integrity for these large systems. This
necessitates strategies that work at the level of the on-chip network
with its rising power budget.
This thesis proposes models, techniques and architectures to improve
power and thermal integrity of Network-on-Chip (NoC)-based
many-core systems. The thesis is composed of two major parts: i)
minimization and modelling of power supply variations to improve
power integrity; and ii) dynamic thermal adaptation to improve thermal
integrity. This thesis makes four major contributions. The first is
a computational model of on-chip power supply variations in NoCs.
The proposed model embeds a power delivery model, an NoC activity
simulator and a power model. The model is verified with SPICE simulation
and employed to analyse power supply variations in synthetic
and real NoC workloads. Novel observations regarding power supply
noise correlation with different traffic patterns and routing algorithms
are found. The second is a new application mapping strategy aiming
vii
to minimize power supply noise in NoCs. This is achieved by defining
a new metric, switching activity density, and employing a force-based
objective function that results in minimizing switching density. Significant
reductions in power supply noise (PSN) are achieved with a low
energy penalty. This reduction in PSN also results in a better link timing
accuracy. The third contribution is a new dynamic thermal-adaptive
routing strategy to effectively diffuse heat from the NoC-based threedimensional
(3D) CMPs, using a dynamic programming (DP)-based distributed
control architecture. Moreover, a new approach for efficient extension
of two-dimensional (2D) partially-adaptive routing algorithms
to 3D is presented. This approach improves three-dimensional networkon-
chip (3D NoC) routing adaptivity while ensuring deadlock-freeness.
Finally, the proposed thermal-adaptive routing is implemented in
field-programmable gate array (FPGA), and implementation challenges,
for both thermal sensing and the dynamic control architecture are addressed.
The proposed routing implementation is evaluated in terms
of both functionality and performance.
The methodologies and architectures proposed in this thesis open a
new direction for improving the power and thermal integrity of future
NoC-based 2D and 3D many-core architectures