RF Energy Harvesting Study Using Various Metamaterial Patch Structure

The E-field absorbance performance of various metamaterial absorber structure is presented. The study started from the simulation of various design patch of metamaterial absorber. The performances are measured from the reflection coefficient, percentage of absorption, value of E-field and the surface current for circle, square and hexagon patch design of metamaterial absorber. From the simulation, it is shown that the circle patch design shows the most reliable design for harvest energy with the absorption of 99.85% and highest E-field concentration of 2.07 × 105 V/m

Rheological and resistance properties of magnetorheological elastomer with cobalt for sensor application

Cobalt particles have been introduced as a filler due to the advantages of embedding their magnetic and electrical properties in magnetorheological elastomer (MRE). In the present research, the rheology and resistance of MRE are experimentally evaluated. Isotropic and anisotropic MRE samples containing silicone rubber and cobalt particles were fabricated. The magnetic properties of MRE are conducted using a vibrating sample magnetometer (VSM). The morphological aspects of MRE are observed by using field emission scanning electron microscopy (FESEM) and characterized by energy-dispersive X-ray spectroscopy (EDX). Rheological properties under various magnetic field strengths were measured for the magnetic field, strain amplitude, and frequency sweep test by using a parallel-plate rheometer. Subsequently, the resistance of MRE is tested under different applied forces and magnetic fields. The MRE storage modulus depicted an enhancement in field-dependent modulus across all the applied magnetic fields. The electrical resistance generated from the sample can be manipulated by external magnetic fields and mechanical loads. The conductivity of MRE is due to the existence of cobalt arrangements observed by FESEM. By introducing cobalt as filler and obtaining satisfactory results, the study might open new avenues for cobalt to be used as filler in MRE fabrication for future sensing applications

An Implementation of Grouping Nodes in Wireless Sensor Network Based on Distance by Using K-Means Clustering

Wireless Sensor Network (WSN) is a network consisting of several sensor nodes that communicate with each other and work together to collect data from the surrounding environment. One of the WSN problems is the limited available power. Therefore, nodes on WSN need to communicate by using a cluster-based routing protocol. To solve this, the researchers propose a node grouping based on distance by using k-means clustering with a hardware implementation. Cluster formation and member node selection are performed based on the nearest device of the sensor node to the cluster head. The k-means algorithm utilizes Euclidean distance as the main grouping nodes parameter obtained from the conversion of the Received Signal Strength Indication (RSSI) into the distance estimation between nodes. RSSI as the parameter of nearest neighbor nodes uses lognormal shadowing channel modeling method that can be used to get the path loss exponent in an observation area. The estimated distance in the observation area has 27.9% error. The average time required for grouping is 58.54 s. Meanwhile, the average time used to retrieve coordinate data on each cluster to the database is 45.54 s. In the system, the most time-consuming process is the PAN ID change process with an average time of 14.20 s for each change of PAN ID. The grouping nodes in WSN using k-means clustering algorithm can improve the power efficiency by 6.5%

Mechanical performance and applications of cnts reinforced polymer composites—A review

Developments in the synthesis and scalable manufacturing of carbon nanomaterials like carbon nanotubes (CNTs) have been widely used in the polymer material industry over the last few decades, resulting in a series of fascinating multifunctional composites used in fields ranging from portable electronic devices, entertainment and sports to the military, aerospace, and automotive sectors. CNTs offer good thermal and electrical properties, as well as a low density and a high Young’s modulus, making them suitable nanofillers for polymer composites. As mechanical reinforcements for structural applications CNTs are unique due to their nano-dimensions and size, as well as their incredible strength. Although a large number of studies have been conducted on these novel materials, there have only been a few reviews published on their mechanical performance in polymer composites. As a result, in this review we have covered some of the key application factors as well as the mechanical properties of CNTs-reinforced polymer composites. Finally, the potential uses of CNTs hybridised with polymer composites reinforced with natural fibres such as kenaf fibre, oil palm empty fruit bunch (OPEFB) fibre, bamboo fibre, and sugar palm fibre have been highlighted

Seroprevalence of leptospiral antibodies among market workers and food handlers in the central state of Malaysia

Objective:The high prevalence of leptospirosis in humans is of great public health concern, particularly in tropical and subtropical regions. This study aimed to determine the seroprevalence of leptospiral antibodies and distribution of serovars, and to assess the usefulness of enzyme-linked immunosorbent assay (ELISA) as a screening method for leptospiral antibodies in a high-risk healthy community. Methods: Cross-sectional study of 231 market workers and food handlers in wet markets and food premises from two localities in central Malaysia. Respondents' background information was obtained using a questionnaire. Serum samples were tested for leptospiral antibodies using ELISA and microscopic agglutination test (MAT). Results: Seroprevalence of leptospirosis among healthy workers was 46.3%. Detection of seropositivity was higher by MAT (46%) than ELISA (15%). We observed high seropositivity among local workers (49%), food handlers (49.5%), females (60.8%) and those aged 34 years and older (46.3%). Local strain LEP175 was the predominant serovar, followed by WHO strain Patoc. Conclusion: Overall seroprevalence among healthy food handlers and market workers was high in this study. The workplace places susceptible individuals at risk of leptospirosis

Isoprene hotspots at the Western Coast of Antarctic Peninsula during MASEC′16

Isoprene (C5H8) plays an important role in the formation of surface ozone (O3) and the secondary organic aerosol (SOA) which contributed to the climate change. This study aims to determine hourly distribution of tropospheric isoprene over the Western Coast of Antarctic Peninsula (WCAP) during the Malaysian Antarctic Scientific Expedition Cruise 2016 (MASEC′16). In-situ measurements of isoprene were taken using a custom-built gas chromatography with photoionization detector, known as iDirac. Biological parameters such as chlorophyll a (chl-a) and particulate organic carbon (POC) were compared to the in-situ isoprene measurements. Significant positive correlation was observed between isoprene and POC concentrations (r2 = 0.67, p < 0.001), but not between isoprene and chl-a. The hotspots of isoprene over maritime Antarctic were then were investigated using NAME dispersion model reanalysis. Measurements showed that isoprene mixing ratio were the highest over region of King George Island, Deception Island and Booth Island with values of ∼5.0, ∼0.9 and ∼5.2 ppb, respectively. Backward trajectory analysis showed that air masses may have lifted the isoprene emitted by marine algae. We believe our findings provide valuable data set of isoprene estimation over the under sampled WCAP

Thermogravimetric analysis properties of cellulosic natural fiber polymer composites: a review on influence of chemical treatmentst

Natural fiber such as bamboo fiber, oil palm empty fruit bunch (OPEFB) fiber, kenaf fiber, and sugar palm fiber-reinforced polymer composites are being increasingly developed for lightweight structures with high specific strength in the automotive, marine, aerospace, and construction indus-tries with significant economic benefits, sustainability, and environmental benefits. The plant-based natural fibers are hydrophilic, which is incompatible with hydrophobic polymer matrices. This leads to a reduction of their interfacial bonding and to the poor thermal stability performance of the resulting fiber-reinforced polymer composite. Based on the literature, the effect of chemical treatment of natural fiber-reinforced polymer composites had significantly influenced the thermogravimetric analysis (TGA) together with the thermal stability performance of the composite structure. In this review, the effect of chemical treatments used on cellulose natural fiber-reinforced thermoplastic and thermosetting polymer composites has been reviewed. From the present review, the TGA data are useful as guidance in determining the purity and composition of the composites’ structures, drying, and the ignition temperatures of materials. Knowing the stability temperatures of compounds based on their weight, changes in the temperature dependence is another factor to consider regarding the effectiveness of chemical treatments for the purpose of synergizing the chemical bonding between the natural fiber with polymer matrix or with the synthetic fibers

Disease progression in Plasmodium knowlesi malaria is linked to variation in invasion gene family members.

Emerging pathogens undermine initiatives to control the global health impact of infectious diseases. Zoonotic malaria is no exception. Plasmodium knowlesi, a malaria parasite of Southeast Asian macaques, has entered the human population. P. knowlesi, like Plasmodium falciparum, can reach high parasitaemia in human infections, and the World Health Organization guidelines for severe malaria list hyperparasitaemia among the measures of severe malaria in both infections. Not all patients with P. knowlesi infections develop hyperparasitaemia, and it is important to determine why. Between isolate variability in erythrocyte invasion, efficiency seems key. Here we investigate the idea that particular alleles of two P. knowlesi erythrocyte invasion genes, P. knowlesi normocyte binding protein Pknbpxa and Pknbpxb, influence parasitaemia and human disease progression. Pknbpxa and Pknbpxb reference DNA sequences were generated from five geographically and temporally distinct P. knowlesi patient isolates. Polymorphic regions of each gene (approximately 800 bp) were identified by haplotyping 147 patient isolates at each locus. Parasitaemia in the study cohort was associated with markers of disease severity including liver and renal dysfunction, haemoglobin, platelets and lactate, (r = ≥ 0.34, p =  <0.0001 for all). Seventy-five and 51 Pknbpxa and Pknbpxb haplotypes were resolved in 138 (94%) and 134 (92%) patient isolates respectively. The haplotypes formed twelve Pknbpxa and two Pknbpxb allelic groups. Patients infected with parasites with particular Pknbpxa and Pknbpxb alleles within the groups had significantly higher parasitaemia and other markers of disease severity. Our study strongly suggests that P. knowlesi invasion gene variants contribute to parasite virulence. We focused on two invasion genes, and we anticipate that additional virulent loci will be identified in pathogen genome-wide studies. The multiple sustained entries of this diverse pathogen into the human population must give cause for concern to malaria elimination strategists in the Southeast Asian region