Development of Rechargeable Seawater Battery Module

Rechargeable seawater batteries (SWBs) use Na+ ions dissolved in water (seawater or salt-water) as the cathode material. They are attracting attention for marine applications such as light buoys, marine drones, auxiliary power for sailing boats and so on. So far, SWB design has been developed from the coin-type to prismatic-shape cell for research purposes to investigate cell components and electrochemical behaviors. However, for commercial applications, that generally require >12 V and >15 W, the development of an SWB module is required, including cell assembly and packing design. The purpose of this work was to conduct research on the SWB cell assembly method while considering the SWB's properties and minimizing current imbalance. Additionally, a 5 Series (S) 4 Parallel (P) SWB module is constructed and validated using commercially available light buoys (12 V, 15 W)

Using redox electrolytes to extend the charge storage capacity in an aqueous hybrid ion battery

Aqueous hybrid Zn2+/Na+ ion batteries (AHZSIBs) have gained considerable attention for stationary energy storage applications because of their outstanding safety, sustainability, abundance, and low raw material costs. However, the low capacity values (<100 mAh/g) of the Na+ ion deinsertion/insertion cathodes limit the overall capacity storage of AHZSIBs. Herein, we propose a novel concept to extend the charge storage performance of AHZSIBs using electrolyte with redox characteristics. The benefits of using redox aqueous electrolytes such as 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL) and sodium ferrocyanide (Na-4[Fe(CN)(6)]) were investigated in an AHZSB, which consists of Zn metal as an anode and sodium nickel hexacyanoferrate (Na-NiHCF) as the Na+ deinsertion/insertion cathode. The proposed AHZSB using Na4[Fe(CN)6] redox electrolyte provided a capacity (144 mAh/g) that was similar to 2.94 times higher than AHZSIB using a conventional Na2SO4 electrolyte (49 mAh/g). This capacity enhancement emanated from the faradaic contribution of the Fe2+(CN)(6)(4-)/Fe3+(CN)(6)(3-) redox pair present in the electrolyte and Fe2+/Fe3+ redox pair in the lattice of Na-NiHCF. In addition, the TEMPOL-based redox electrolyte also improved the capacity (from 49 to 120 mAh/g) through the combined faradaic contribution of the TEMPOL/TEMPOL+ redox pair dissolved in the electrolyte and the Fe2+/Fe3+ redox pair in the Na-NiHCF lattice. These results confirm the competence of the redox electrolyte in AHZSIB in enhancing the charge storage capacity. We anticipate that this proof-of-concept study will provide a new direction for developing high-capacity storage AHZSIBs. More importantly, this approach can be used in any aqueous/non-aqueous batteries

Hypoxia-inducible factor-1 alpha regulates microglial functions affecting neuronal survival in the acute phase of ischemic stroke in mice

Cells universally adapt to ischemic conditions by turning on a transcription factor hypoxia-inducible factor (HIF), in which its role is known to differ widely across many different types of cells. Given that microglia have been reported as an essential mediator of neuroinflammation in many brain diseases, we examined the role of HIF in microglia in the progression of an acute phase of ischemic stroke by challenging our novel strains of myeloid-specific Hif-1 alpha or Hif-2 alpha knockout (KO) mice created by Cre-loxP system via middle cerebral artery occlusion (MCAO). We observed that Hif-1 alpha but not Hif-2 alpha KO mice exhibited an improved recovery compared to wild-type (WT) mice determined by behavioral tests. Immunostaining analyses revealed that there were increased numbers of both mature and immature neurons while microglia and apoptotic cells were significantly decreased in the dentate gyrus of Hif-1 alpha KO mice following MCAO. By isolating microglia with fluorescence-activated cell sorter, we found that HIF-1 alpha-deficient microglia were impaired in phagocytosis, reactive oxygen species (ROS) production, and tumor necrosis factor-alpha (TNF-alpha) secretion. We further observed a significant decrease in the expression of Cd36 and milk fat globule-epidermal growth factor 8 (Mfg-e8) genes, both of which contain hypoxia-responsive element (HRE). Knocking down either of these genes in BV2 microglial cells was sufficient to abrogate HIF-mediated increase in phagocytosis, production of intracellular ROS, or TNF-alpha secretion. Our results therefore suggest that HIF-1 alpha in microglia is a novel therapeutic target to protect neuronal survival following an acute phase of ischemic stroke.113Ysciescopu

Simultaneous Energy Storage and Seawater Desalination using Rechargeable Seawater Battery: Feasibility and Future Directions

Rechargeable seawater battery (SWB) is a unique energy storage system that can directly transform seawater into renewable energy. Placing a desalination compartment between SWB anode and cathode (denoted as seawater battery desalination; SWB-D) enables seawater desalination while charging SWB. Since seawater desalination is a mature technology, primarily occupied by membrane-based processes such as reverse osmosis (RO), the energy cost has to be considered for alternative desalination technologies. So far, the feasibility of the SWB-D system based on the unit cost per desalinated water ($m(-3)) has been insufficiently discussed. Therefore, this perspective aims to provide this information and offer future research directions based on the detailed cost analysis. Based on the calculations, the current SWB-D system is expected to have an equipment cost of approximate to 1.02$ m(-3) (lower than 0.60-1.20 $ m(-3) of RO), when 96% of the energy is recovered and stable performance for 1000 cycles is achieved. The anion exchange membrane (AEM) and separator contributes greatly to the material cost occupying 50% and 41% of the total cost, respectively. Therefore, future studies focusing on creating low cost AEMs and separators will pave the way for the large-scale application of SWB-D

Seawater Battery-Based Wireless Marine Buoy System with Battery Degradation Prediction and Multiple Power Optimization Capabilities

This paper presents a wireless marine buoy system based on the seawater battery (SWB), providing self-powered operation, power-efficient management, and degradation prediction and fault detection. Since conventional open circuit voltage (OCV) methods cannot be applied due to inherent cell characteristics of SWB, the coulomb counting (CC) method is adopted for the state of charge (SOC) monitoring. For the state of health (SOH), a variance-based detection scheme is proposed to provide degradation prediction and fault detection of the SWB. The self-powered operation is augmented by two proposed power optimization schemes such as multiple power management and three-step LED light control. A wireless buoy system prototype is manufactured, and its functional feasibility is experimentally verified, where its location and SOC are periodically monitored in a smartphone-based wireless platform

Remote health monitoring services in nursing homes

Aged people are challenged by serious complications from chronic diseases, such as mood disorder, diabetes, heart disease, and infectious diseases, which are also the most common causes of death in older people. Therefore, elderly care facilities are more important than ever. The most common causes of death in elderly care facilities were reported to be diabetes, cardiovascular disease, and pneumonia. Recently, the coronavirus disease 2019 (COVID-19) pandemic have a great impact on blind spots of safety where aged people were isolated from society. Elderly care facilities were one of the blind spots in the midst of the pandemic, where major casualties were reported from COVID-19 complications because most people had one or two mortality risk factors, such as diabetes or cardiovascular disease. Therefore, medical governance of public health center and hospital, and elderly care facility is becoming important issue of priority. Thus, remote health monitoring service by the Internet of Medical Things (IoMT) sensors is more important than ever. Recently, technological breakthroughs have enabled healthcare professionals to have easy access to patients in medical blind spots through the use of IoT sensors. These sensors can detect medically urgent situations in a timely fashion and make medical decisions for aged people in elderly care facilities. Real-time electrocardiogram and blood sugar monitoring sensors are approved by the medical insurance service. Real-time monitoring services in medical blind spots, such as elderly care facilities, has been suggested. Heart rhythm monitoring could play a role in detecting early cardiovascular disease events and monitoring blood glucose levels in the management of chronic diseases, such as diabetes, in aged people in elderly care facilities. This review presents the potential usefulness of remote monitoring with IoMT sensors in medical blind spots and clinical suggestions for applications

Alkali-Metal-Mediated Reversible Chemical Hydrogen Storage Using Seawater

The economic viability and systemic sustainability of a green hydrogen economy are primarily dependent on its storage. However, none of the current hydrogen storage methods meet all the targets set by the US Department of Energy (DoE) for mobile hydrogen storage. One of the most promising routes is through the chemical reaction of alkali metals with water; however, this method has not received much attention owing to its irreversible nature. Herein, we present a reconditioned seawater battery-assisted hydrogen storage system that can provide a solution to the irreversible nature of alkali-metal-based hydrogen storage. We show that this system can also be applied to relatively lighter alkali metals such as lithium as well as sodium, which increases the possibility of fulfilling the DoE target. Furthermore, we found that small (1.75 cm2) and scaled-up (70 cm2) systems showed high Faradaic efficiencies of over 94%, even in the presence of oxygen, which enhances their viability

Recent progress on nanostructured 4 v cathode materials for Li-ion batteries for mobile electronics

Mobile electronics have developed so rapidly that battery technology has hardly been able to keep pace. The increasing desire for lighter and thinner Li-ion batteries with higher capacities is a continuing and constant goal for in research. Achieving higher energy densities, which is mainly dependent on cathode materials, has become a critical issue in the development of new Li-ion batteries. In this review, we will outline the progress on nanostructured 4 V cathode materials of Li-ion batteries for mobile electronics, covering LiCoO2, LiNixCoyMn1-x-yO 2, LiMn2O4, LiNi0.5Mn 1.5O4 and Li-rich layered oxide materials. We aim to provide some scientific insights into the development of superior cathode materials by discussing the advantages of nanostructure, surface-coating, and other key properties.open2