Vortex states in iron-based superconductors with collinear antiferromagnetic cores

Magnetism in the FeAs stoichiometric compounds and its interplay with superconductivity in vortex states are studied by self-consistently solving the Bogoliubov-de Gennes equations based on a two-orbital model with including the on-site interactions between electrons in the two orbitals. It is revealed that for the parent compound, magnetism is caused by the strong Hund's coupling, and the Fermi-surface topology aids to select the spin-density-wave (SDW) pattern. The superconducting (SC) order parameter with s± = Δ0 cos (kx) cos (ky) symmetry is found to be the most favorable pairing for both the electron- and hole-doped cases while the local density of states exhibits the characteristic of nodal gap for the former and full gap for the latter. In the vortex state, the emergence of the field-induced SDW depends on the strength of the Hund's coupling and the Coulomb repulsions. The field-induced SDW gaps the finite-energy contours on the electron- and hole-pocket sides, leading to the dual structures with one reflecting the SC pairing and the other being related to the SDW order. These features can be discernable in STM measurements for identifying the interplay between the field-induced SDW order and the SC order around the core region. © 2009 The American Physical Society.published_or_final_versio

Concrete electrical resistivity at varied water, chloride contents and porosity – experiment, modelling & application

Understanding and characterizing the relationship between the electrical resistivity and the major influencing factors of the concrete have been all the time a topical research in relation to structural durability. This paper reports an experimental study on the influences of water and chloride contents, and porosity on the electrical resistivity of the Portland cement concrete. The results indicate that the electrical resistivity has a strong correlation with the water and chloride contents in concrete. A new characteristic model has been proposed to represent the correlation. The proposed model has been implemented into a numerical modelling case study of cathodic protection for reinforced concrete structure in saline environment.

Comparative study of intestine length, weight and digestibility on different body weight chickens

This experiment was conducted to compare the difference of digestibility on different body weight chickens. Twenty-seven (27) 58-week-old New Yangzhou Chickens of three grade sizes (small 2.0 kg, medium 2.5 kg, and large 3.0 kg) were selected and distributed into three groups (Groups 1 to 3) of nine birds/group, and each group was represented by three replicates. Nutrient retention ratio was determined by adopting whole gather excretion method. In the end of metabolism experiment, all the birds were killed, and the intestine length and intestine weight were measured. Results show that, the amount of feed intake and excretion increased along with body weight gain; the feed intake and excretion in group 3 were significantly higher than that in group 1 (P < 0.05). The sidelong lengths in the three groups were evidently different. Although, the intestinal length as well as the length of the jejunum, ileum and rectum appeared to be gradually improved with the body weight increase, there were no significant differences among the three groups (P > 0.05). The weightier the intestines, the more was body weight of the birds. The retention ratio of energy, crude fiber and neutral detergent fiber increased with body weight gain, but the differences were not significant (P > 0.05). It was concluded that there was no correlation between body weight and digestibility.Keywords: Digestibility, body weight, cock.African Journal of Biotechnology Vol. 12(32), pp. 5097-510

Adventitious shoot regeneration from in vitro stem explants of Phellodendron amurense

An efficient in vitro plant regeneration system from stem explants was established in Phellodendron amurense. Factors influencing shoot regeneration from stems including culture medium type, combinations of plant growth regulators and carbon source in the medium were investigated. Adventitious shoot regeneration was significantly influenced by the type of medium. Murashige and Skoog medium (MS) was the best for promoting shoot regeneration, followed by Gamborg medium (B5) and woody plant medium (WPM). The combination of 6-benzyladenine (BA) and naphthaleneacetic acid (NAA) produced better results for shoot regeneration. The optimum shoot regeneration frequency (74.5%) and number of shoots per explant (12.3) was achieved using MS medium supplemented with 29.7 M BA and 5.8 M NAA. High concentrations of BA and NAA in the medium inhibited shoot formation. Among the three sugars tested, 20 g dm-3 glucose was the optimum for shoot regeneration. Rooting of regenerated shoots was successful on 1/4-strength MS medium with the addition of 15.4 M IBA. Almost 100% plantlets survived acclimatization after transferred to soil.Key words: Phellodendron amurense, callus, shoot regeneration, stem explants

Gate controlled electronic transport in monolayer MoS2 field effect transistor

published_or_final_versio

Cooperative Cargo Transport by Several Molecular Motors

The transport of cargo particles which are pulled by several molecular motors in a cooperative manner is studied theoretically. The transport properties depend primarily on the maximal number, $N$, of motor molecules that may pull simultaneously on the cargo particle. Since each motor must unbind from the filament after a finite number of steps but can also rebind to it again, the actual number of pulling motors is not constant but varies with time between zero and $N$. An increase in the maximal number $N$ leads to a strong increase of the average walking distance (or run length) of the cargo particle. If the cargo is pulled by up to $N$ kinesin motors, e.g., the walking distance is estimated to be $5^{N-1}/N$ micrometers which implies that seven or eight kinesin molecules are sufficient to attain an average walking distance in the centimeter range. If the cargo particle is pulled against an external load force, this force is shared between the motors which provides a nontrivial motor-motor coupling and a generic mechanism for nonlinear force-velocity relationships. With increasing load force, the probability distribution of the instantenous velocity is shifted towards smaller values, becomes broader, and develops several peaks. Our theory is consistent with available experimental data and makes quantitative predictions that are accessible to systematic in vitro experiments.Comment: 24 pages, latex, 6 figures, includes Supporting Tex

Oxygen Diffusion Layer on Ti–6Al–4V Alloy: Scratch and Dry Wear Resistance

Ti–6Al–4V has prominent physical and mechanical properties, which nominate it for various engineering applications. A drawback of the alloy, however, is low scratch and wear resistance, which can be improved by a diffusion treatment. Oxygen diffusion layer (ODL) was produced on Ti–6Al–4V by thermal oxidation at a temperature of 850 °C for 3 and 6 h. Hardness of the samples was measured using a nano-indentation tester. Micro-scratch tests were performed under progressive and constant normal loads of 0–50 N. Dry wear behavior of the samples was studied using a ball-on-disk tribometer. The wear tests were carried out under various normal loads of 7.5, 15 and 30 N for sliding distances of 50, 100, 200 and 300 m using alumina balls as the counterface. The wear and scratch tracks were examined by scanning electron microscope and surface profilometer. The ODL samples showed higher hardness and lower plastic deformation as compared with Ti–6Al–4V. The brittle behavior of the ODL samples caused the formation of cracks and the development of large acoustic signals during scratching under normal loads of 40 and 50 N. The results also showed a higher scratch and wear resistance of the ODL samples compared with Ti–6Al–4V. However, the oxygen diffusion layer formed after 3 h of oxidation showed a sharp increase in the wear rate of the alloy under a normal load of 30 N and a sliding distance of 100 m

Research on Artificial Intelligence Ethics Based on the Evolution of Population Knowledge Base

The unclear development direction of human society is a deep reason for that it is difficult to form a uniform ethical standard for human society and artificial intelligence. Since the 21st century, the latest advances in the Internet, brain science and artificial intelligence have brought new inspiration to the research on the development direction of human society. Through the study of the Internet brain model, AI IQ evaluation, and the evolution of the brain, this paper proposes that the evolution of population knowledge base is the key for judging the development direction of human society, thereby discussing the standards and norms for the construction of artificial intelligence ethics.Comment: 12 pages, 6 figures,1 tabl

Electron transport and band structure in phosphorus-doped polycrystalline silicon films

We study transport mechanisms, effective mass, and band structure by measuring the resistivity, Hall, and Seebeck and Nernst coefficients in heavily phosphorus-doped polycrystalline silicon films made by thermal crystallization of amorphous silicon. We observe a change in transport mechanism which results in an increase in electron mobility from 10% to 80% of the single-crystal silicon mobility as the carrier concentration increases from 1019 to 1020 cm-3. Our measurements of effective mass at the Fermi level indicate that as the carrier concentration increases, there is a shift from impurity-band transport to conduction-band transport, and that the electron effective mass is lower in the impurity band than in the conduction band of Si. The shift to conduction-band transport improves electron mobility with carrier density by improving intragrain carrier mean free path lengths and relaxation times. © 2009 American Institute of Physics.published_or_final_versio

Annealing study of A1/GaSb contact with the use of doppler broadening technique

Using a monoenergetic positron beam, annealing study of the Al/n-GaSb system was performed by monitoring the Doppler broadening of the annihilation radiation as a function of the positron implanting energy. The S-parameter against positron energy data was successfully fitted by a three-layer model (Al/interface/GaSb). The annealing out of the open volume defects in the polycrystalline Al layer was revealed by the decrease in the S-parameter and the increase in the effective diffusion length of the Al layer. For the as-deposited samples, a∼5 nm interfacial region with S-parameter larger than those of the Al overlayer and the bulk was identified. After the 400^ºC annealing, this interfacial region extends to over 40 nm and its S-parameter dramatically drops. This is possibly due to the new phase formation at the interface. Annealing behaviors of SB and L+,B of the GaSb bulk showed the annealing out of positron traps (possibly the VGa-related defect) at 250ºC. However, a further annealing at 400ºC induces the formation of positron traps, which are possibly of another kind of VGa-related defect and the positron shallow trap GaSb antisite.published_or_final_versionProceedings of the 35th Polish Seminar on Positron Annihilation (PSPA), Turawa, Poland, 20-24 September 2004. In Acta Physica Polonica Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics, 2005, v. 107 n. 5, p. 874-87