887 research outputs found

    Ligament-mediated spray formation

    Get PDF
    The spray formed when a fast gas stream blows over a liquid volume presents a wide distribution of fragment sizes. The process involves a succession of changes of the liquid topology, the last being the elongation and capillary breakup of ligaments torn off from the liquid surface. The coalescence of the liquid volumes constitutive of a ligament at the very moment it detaches from the liquid bulk produces larger drops. This aggregation process has its counterpart on the shape of the size distribution associated with the ligament breakup, found to be very well represented by gamma distributions. The exponential shape of the overall distribution in the spray coincides with the large excursion wing of these elementary distributions, underlying the crucial role played by the ligament dynamics in building up the broad statistics of sprays

    Dissipation Scale Fluctuations and Chemical Reaction Rates in Turbulent Flows

    Full text link
    Small separation between reactants, not exceeding 10−8−10−7cm10^{-8}-10^{-7}cm, is the necessary condition for various chemical reactions. It is shown that random advection and stretching by turbulence leads to formation of scalar-enriched sheets of {\it strongly fluctuating thickness} ηc\eta_{c}. The molecular-level mixing is achieved by diffusion across these sheets (interfaces) separating the reactants. Since diffusion time scale is τd∝ηc2\tau_{d}\propto \eta_{c}^{2}, the knowledge of probability density Q(ηc,Re)Q(\eta_{c},Re) is crucial for evaluation of chemical reaction rates. In this paper we derive the probability density Q(ηc,Re,Sc)Q(\eta_{c},Re,Sc) and predict a transition in the reaction rate behavior from R∝Re{\cal R}\propto \sqrt{Re} (Re≀104Re\leq 10^{4}) to the high-Re asymptotics R∝Re0{\cal R}\propto Re^{0}. The theory leads to an approximate universality of transitional Reynolds number Retr≈104Re_{tr}\approx 10^{4}. It is also shown that if chemical reaction involves short-lived reactants, very strong anomalous fluctuations of the length-scale ηc\eta_{c} may lead to non-negligibly small reaction rates

    Shear effects on passive scalar spectra

    Full text link
    The effects of a large-scale shear on the energy spectrum of a passively advected scalar field are investigated. The shear is superimposed on a turbulent isotropic flow, yielding an Obukhov-Corrsin k−5/3k^{-5/3} scalar spectrum at small scales. Shear effects appear at large scales, where a different, anisotropic behavior is observed. The scalar spectrum is shown to behave as k−4/3k^{-4/3} for a shear fixed in intensity and direction. For other types of shear characteristics, the slope is generally intermediate between the -5/3 Obukhov-Corrsin's and the -1 Batchelor's values. The physical mechanisms at the origin of this behaviour are illustrated in terms of the motion of Lagrangian particles. They provide an explanation to the scalar spectra shallow and dependent on the experimental conditions observed in shear flows at moderate Reynolds numbers.Comment: 10 LaTeX pages,3 eps Figure

    How vortices mix

    No full text
    International audienceThe advection of a passive scalar blob in the deformation field of an axisymmetric vortex is a simple mixing protocol for which the advection-diffusion problem is amenable to a near-exact description. The blob rolls-up in a spiral which ultimately fades away in the diluting medium. The complete transient concentration field in the spiral is accessible from the Fourier equations in a properly chosen frame. The concentration histogram of the scalar wrapped in the spiral presents unexpected singular transient features and its long time properties are discussed in connection with mixtures from the real world

    Hybrid binomial Langevin-multiple mapping conditioning modeling of a reacting mixing layer

    Get PDF
    A novel, stochastic, hybrid binomial Langevin-multiple mapping conditioning (MMC) model—that utilizes the strengths of each component—has been developed for inhomogeneous flows. The implementation has the advantage of naturally incorporating velocity-scalar interactions through the binomial Langevin model and using this joint probability density function (PDF) to define a reference variable for the MMC part of the model. The approach has the advantage that the difficulties encountered with the binomial Langevin model in modeling scalars with nonelementary bounds are removed. The formulation of the closure leads to locality in scalar space and permits the use of simple approaches (e.g., the modified Curl’s model) for transport in the reference space. The overall closure was evaluated through application to a chemically reacting mixing layer. The results show encouraging comparisons with experimental data for the first two moments of the PDF and plausible results for higher moments at a relatively modest computational cost

    Van Hove singularities in Probability Density Functions of scalars

    Get PDF
    A general theory for the Probability Density Function (PDF) of a scalar stirred in an axisymmetric time-dependent flow is derived. This theory reveals singularities, discontinuities and cusps occurring as soon as the spatial gradient of the scalar concentration vanishes somewhere in the field. These singularities are similar to the Van Hove singularities obtained in the density of vibration modes of a crystal. This feature, ubiquitous in convection–diffusion problems, is documented experimentally for the mixing of a dye in a Lamb–Oseen vortex

    The destabilization of an initially thick liquid sheet edge

    Get PDF
    International audienceBy forcing the sudden dewetting of a free soap film attached on one edge to a straight solid wire, we study the recession and subsequent destabilization of its free edge. The newly formed rim bordering the sheet is initially thicker than the film to which it is attached, because of the Plateau border preexisting on the wire. The initial condition is thus that of an immobile massive toroidal rim connected to a thin liquid film of thickness h. The terminal Taylor-Culick receding velocity V = sqrt(2 sigma/rho h), where sigma and rho are the liquid surface tension and density, respectively, is only reached after a transient acceleration period which promotes the rim destabilization. The selected wavelength and associated growth time coincide with those of an inertial instability driven by surface tension

    Impacts on thin elastic sheets

    No full text
    International audienceWe study transverse impacts of rigid objects on a free elastic membrane, using thin circular sheets of natural rubber as experimental models. After impact, two distinct axisymmetric waves propagate in and on the sheet. First a tensile wave travels at sound speed leaving behind the wave front a stretched domain. Then, a transverse wave propagates on the stretched area at a lower speed. In the stretched area, geometrical confinement induces compressive circumferential stresses leading to a buckling instability, giving rise to radial wrinkles. We report on a set of experiments and theoretical remarks on the conditions of occurrence of these wrinkles, their dynamics and wavelength

    Drop deformation by laser-pulse impact

    Get PDF
    A free-falling absorbing liquid drop hit by a nanosecond laser-pulse experiences a strong recoil-pressure kick. As a consequence, the drop propels forward and deforms into a thin sheet which eventually fragments. We study how the drop deformation depends on the pulse shape and drop properties. We first derive the velocity field inside the drop on the timescale of the pressure pulse, when the drop is still spherical. This yields the kinetic-energy partition inside the drop, which precisely measures the deformation rate with respect to the propulsion rate, before surface tension comes into play. On the timescale where surface tension is important the drop has evolved into a thin sheet. Its expansion dynamics is described with a slender-slope model, which uses the impulsive energy-partition as an initial condition. Completed with boundary integral simulations, this two-stage model explains the entire drop dynamics and its dependance on the pulse shape: for a given propulsion, a tightly focused pulse results in a thin curved sheet which maximizes the lateral expansion, while a uniform illumination yields a smaller expansion but a flat symmetric sheet, in good agreement with experimental observations.Comment: submitted to J. Fluid Mec

    Fragmentation de liquides et de solides

    Get PDF
    On s'intĂ©resse Ă  la forme et Ă  la dynamique d'objets dĂ©formables lors d'un impact avec une source de quantitĂ© de mouvement dirigĂ©e. On envisagera le cas d'un objet dur (Ă©lastique) choquĂ© par un autre objet dur pour des gĂ©omĂ©tries simples (tiges, feuilles), le cas d'un objet mou (liquide) impactant un solide, et le cas d'un objet mou se dĂ©formant dans un milieu encore plus mou (gaz). On soulignera l'intĂ©rĂȘt de ces observations pour le problĂšme de la fragmentation en gĂ©nĂ©ral, et pour la comprĂ©hension de certains phĂ©nomĂšnes naturels comme la pluie
    • 

    corecore