771 research outputs found
Ab-initio Molecular Dynamics study of electronic and optical properties of silicon quantum wires: Orientational Effects
We analyze the influence of spatial orientation on the optical response of
hydrogenated silicon quantum wires. The results are relevant for the
interpretation of the optical properties of light emitting porous silicon. We
study (111)-oriented wires and compare the present results with those
previously obtained within the same theoretical framework for (001)-oriented
wires [F. Buda {\it et al.}, {\it Phys. Rev. Lett.} {\bf 69}, 1272, (1992)]. In
analogy with the (001)-oriented wires and at variance with crystalline bulk
silicon, we find that the (111)-oriented wires exhibit a direct gap at whose value is largely enhanced with respect to that found in bulk
silicon because of quantum confinement effects. The imaginary part of the
dielectric function, for the external field polarized in the direction of the
axis of the wires, shows features that, while being qualitatively similar to
those observed for the (001) wires, are not present in the bulk. The main
conclusion which emerges from the present study is that, if wires a few
nanometers large are present in the porous material, they are
optically active independently of their specific orientation.Comment: 14 pages (plus 6 figures), Revte
Ternary Quarter Wavelength Coatings for Gravitational Wave Detector Mirrors: Design Optimization via Exhaustive Search
Multimaterial optical coatings are a promising viable option to meet the
challenging requirements (in terms of transmittance, absorbance and thermal
noise) of next generation gravitational wave detector mirrors. In this paper we
focus on ternary coatings consisting of quarter-wavelength thick layers, where
a third material (H') is added to the two presently in use, namely Silica (L)
and Titania-doped Tantala (H), featuring higher dielectric contrast (against
Silica), and lower thermal noise (compared to Titania-doped Tantala), but
higher optical losses. We seek the optimal material sequences, featuring
minimal thermal (Brownian) noise under prescribed transmittance and absorbance
constraints, by exhaustive simulation over all possible configurations, for
different values (in a meaningful range) of the optical density and extinction
coefficient of the third material. In all cases studied, the optimal designs
consist of a stack of (H'|L) doublets topped by a stack of (H|L) doublets,
confirming previous heuristic assumptions, and the achievable coating noise
power spectral density reduction factor is \sim 0.5. The robustness of the
found optimal designs against layer thickness deposition errors and
uncertainties and/or fluctuations in the optical losses of the third material
is also investigated. Possible margins for further thermal noise reduction by
layer thickness optimization, and strategies to implement it, are discussed.Comment: (twocolum style) 13 pages, 8 figures, 4 table (updated version 5)
Appearing on Physical Review Researc
Analytical Solution for the Deformation of a Cylinder under Tidal Gravitational Forces
Quite a few future high precision space missions for testing Special and
General Relativity will use optical resonators which are used for laser
frequency stabilization. These devices are used for carrying out tests of the
isotropy of light (Michelson-Morley experiment) and of the universality of the
gravitational redshift. As the resonator frequency not only depends on the
speed of light but also on the resonator length, the quality of these
measurements is very sensitive to elastic deformations of the optical resonator
itself. As a consequence, a detailed knowledge about the deformations of the
cavity is necessary. Therefore in this article we investigate the modeling of
optical resonators in a space environment. Usually for simulation issues the
Finite Element Method (FEM) is applied in order to investigate the influence of
disturbances on the resonator measurements. However, for a careful control of
the numerical quality of FEM simulations a comparison with an analytical
solution of a simplified resonator model is beneficial. In this article we
present an analytical solution for the problem of an elastic, isotropic,
homogeneous free-flying cylinder in space under the influence of a tidal
gravitational force. The solution is gained by solving the linear equations of
elasticity for special boundary conditions. The applicability of using FEM
codes for these simulations shall be verified through the comparison of the
analytical solution with the results gained within the FEM code.Comment: 23 pages, 3 figure
Comprehensive Evaluation of Plasma 7-Ketocholesterol and Cholestan-3β,5α,6β-Triol in an Italian Cohort of Patients Affected by Niemann-Pick Disease due to NPC1 and SMPD1 Mutations
: Niemann-Pick C disease (NPCD) is a rare autosomal recessive neurovisceral disorder with a heterogeneous clinical presentation. Cholestan-3β,5α,6β-triol and 7-ketocholesterol have been proposed as biomarkers for the screening of NPCD. In this work, we assessed oxysterols levels in a cohort of Italian patients affected by NPCD and analyzed the obtained results in the context of the clinical, biochemical and molecular data. In addition, a group of patients affected by Niemann-Pick B disease (NPBD) were also analyzed. NPC patients presented levels of both oxysterols way above the cut off value, except for 5 siblings presenting the variant biochemical phenotype who displayed levels of 3β,5α,6β-triol below or just above the cut-off value; 2 of them presented also normal levels of 7-KC. Both oxysterols were extremely high in a patient presenting the neonatal systemic lethal phenotype. All NPB patients showed increased oxysterols levels. In conclusion, the reported LC-MS/MS assay provides a robust non-invasive screening tool for NPCD. However, false negative results can be obtained in patients expressing the variant biochemical phenotype. These data strengthen the concept that the results should always be interpreted in the context of the patients' clinical picture and filipin staining and/or genetic studies might still be undertaken in patients with normal levels of oxysterols if symptoms are highly suggestive of NPCD. Both oxysterols are significantly elevated in NPB patients; thus a differential diagnosis should always be performed in patients presenting isolated hepatosplenomegaly, a common clinical sign of both NPCD and NPBD
Genomic and clinical findings in myeloid neoplasms with PDGFRB rearrangement
Platelet-derived growth factor receptor B (PDGFRB) gene rearrangements define a unique subgroup of myeloid and lymphoid neoplasms frequently associated with eosinophilia and characterized by high sensitivity to tyrosine kinase inhibition. To date, various PDGFRB/5q32 rearrangements, involving at least 40 fusion partners, have been reported. However, information on genomic and clinical features accompanying rearrangements of PDGFRB is still scarce. Here, we characterized a series of 14 cases with a myeloid neoplasm using cytogenetic, single nucleotide polymorphism array, and next-generation sequencing. We identified nine PDGFRB translocation partners, including the KAZN gene at 1p36.21 as a novel partner in a previously undescribed t(1;5)(p36;q33) chromosome change. In all cases, the PDGFRB recombination was the sole cytogenetic abnormality underlying the phenotype. Acquired somatic variants were mainly found in clinically aggressive diseases and involved epigenetic genes (TET2, DNMT3A, ASXL1), transcription factors (RUNX1 and CEBPA), and signaling modulators (HRAS). By using both cytogenetic and nested PCR monitoring to evaluate response to imatinib, we found that, in non-AML cases, a low dosage (100–200 mg) is sufficient to induce and maintain longstanding hematological, cytogenetic, and molecular remissions
Search for gravitational waves from binary inspirals in S3 and S4 LIGO data
We report on a search for gravitational waves from the coalescence of compact
binaries during the third and fourth LIGO science runs. The search focused on
gravitational waves generated during the inspiral phase of the binary
evolution. In our analysis, we considered three categories of compact binary
systems, ordered by mass: (i) primordial black hole binaries with masses in the
range 0.35 M(sun) < m1, m2 < 1.0 M(sun), (ii) binary neutron stars with masses
in the range 1.0 M(sun) < m1, m2 < 3.0 M(sun), and (iii) binary black holes
with masses in the range 3.0 M(sun)< m1, m2 < m_(max) with the additional
constraint m1+ m2 < m_(max), where m_(max) was set to 40.0 M(sun) and 80.0
M(sun) in the third and fourth science runs, respectively. Although the
detectors could probe to distances as far as tens of Mpc, no gravitational-wave
signals were identified in the 1364 hours of data we analyzed. Assuming a
binary population with a Gaussian distribution around 0.75-0.75 M(sun), 1.4-1.4
M(sun), and 5.0-5.0 M(sun), we derived 90%-confidence upper limit rates of 4.9
yr^(-1) L10^(-1) for primordial black hole binaries, 1.2 yr^(-1) L10^(-1) for
binary neutron stars, and 0.5 yr^(-1) L10^(-1) for stellar mass binary black
holes, where L10 is 10^(10) times the blue light luminosity of the Sun.Comment: 12 pages, 11 figure
All-sky search for periodic gravitational waves in LIGO S4 data
We report on an all-sky search with the LIGO detectors for periodic
gravitational waves in the frequency range 50-1000 Hz and with the frequency's
time derivative in the range -1.0E-8 Hz/s to zero. Data from the fourth LIGO
science run (S4) have been used in this search. Three different semi-coherent
methods of transforming and summing strain power from Short Fourier Transforms
(SFTs) of the calibrated data have been used. The first, known as "StackSlide",
averages normalized power from each SFT. A "weighted Hough" scheme is also
developed and used, and which also allows for a multi-interferometer search.
The third method, known as "PowerFlux", is a variant of the StackSlide method
in which the power is weighted before summing. In both the weighted Hough and
PowerFlux methods, the weights are chosen according to the noise and detector
antenna-pattern to maximize the signal-to-noise ratio. The respective
advantages and disadvantages of these methods are discussed. Observing no
evidence of periodic gravitational radiation, we report upper limits; we
interpret these as limits on this radiation from isolated rotating neutron
stars. The best population-based upper limit with 95% confidence on the
gravitational-wave strain amplitude, found for simulated sources distributed
isotropically across the sky and with isotropically distributed spin-axes, is
4.28E-24 (near 140 Hz). Strict upper limits are also obtained for small patches
on the sky for best-case and worst-case inclinations of the spin axes.Comment: 39 pages, 41 figures An error was found in the computation of the C
parameter defined in equation 44 which led to its overestimate by 2^(1/4).
The correct values for the multi-interferometer, H1 and L1 analyses are 9.2,
9.7, and 9.3, respectively. Figure 32 has been updated accordingly. None of
the upper limits presented in the paper were affecte
Searching for a Stochastic Background of Gravitational Waves with LIGO
The Laser Interferometer Gravitational-wave Observatory (LIGO) has performed
the fourth science run, S4, with significantly improved interferometer
sensitivities with respect to previous runs. Using data acquired during this
science run, we place a limit on the amplitude of a stochastic background of
gravitational waves. For a frequency independent spectrum, the new limit is
. This is currently the most sensitive
result in the frequency range 51-150 Hz, with a factor of 13 improvement over
the previous LIGO result. We discuss complementarity of the new result with
other constraints on a stochastic background of gravitational waves, and we
investigate implications of the new result for different models of this
background.Comment: 37 pages, 16 figure
A Joint Search for Gravitational Wave Bursts with AURIGA and LIGO
The first simultaneous operation of the AURIGA detector and the LIGO
observatory was an opportunity to explore real data, joint analysis methods
between two very different types of gravitational wave detectors: resonant bars
and interferometers. This paper describes a coincident gravitational wave burst
search, where data from the LIGO interferometers are cross-correlated at the
time of AURIGA candidate events to identify coherent transients. The analysis
pipeline is tuned with two thresholds, on the signal-to-noise ratio of AURIGA
candidate events and on the significance of the cross-correlation test in LIGO.
The false alarm rate is estimated by introducing time shifts between data sets
and the network detection efficiency is measured with simulated signals with
power in the narrower AURIGA band. In the absence of a detection, we discuss
how to set an upper limit on the rate of gravitational waves and to interpret
it according to different source models. Due to the short amount of analyzed
data and to the high rate of non-Gaussian transients in the detectors noise at
the time, the relevance of this study is methodological: this was the first
joint search for gravitational wave bursts among detectors with such different
spectral sensitivity and the first opportunity for the resonant and
interferometric communities to unify languages and techniques in the pursuit of
their common goal.Comment: 18 pages, IOP, 12 EPS figure
- …