140 research outputs found
A new method for estimating fault location in radial medium voltage distribution network only using measurements at feeder beginning
This paper proposes a new fault location method in radial medium voltage distribution networks. The proposed method only uses the measurement data at the feeder beginning to approximate the characteristic equation showing the dependence between the positive-sequence voltage and phase angle at the monitoring point with the distance to the fault location for each fault type on each line segment. To determine these characteristic equation coefficients, the entire distribution network will be modeled and simulated by four types of faults at different locations along the lines to build the initial database. Based on this database, the mathematical functions in MATLAB software are applied to approximate these coefficients corresponding to each type of fault for each line segment in the network. Then, from the current and voltage measurement data at the feeder beginning, the algorithms of global search, comparison, and fault ranking are used to find out where the fault occurs on the distribution network. Two types of distribution network with and without branches are studied and simulated in this paper to verify and evaluate the effectiveness of the proposed method
A Method Based on Weighted Least Squares for Estimating Voltage of Distribution Network System Integrated with Distributed Generations Using Remote Measurement Data
Voltage quality of a distribution network system is one of the most important issues. To evaluate the voltage in real-time, this paper proposes a method of voltage estimation in distribution network systems which are integrated with distributed generations (DGs). In the proposed method, the weighted least squares (WLS) method is used to optimize the objective function of the error measurement which is built by the network configuration, real-time and pseudo measurements at the main substation and DG buses. The proposed method is verified by simulation case studies of the 17-bus radial distribution network integrated with DGs including a solar power plant and two wind power plants. The simulation results in this work confirm that the proposed method is high accuracy for voltage estimation
Extensive and Intelligent Exploitation of Renewable Energies at Sewage Treatment Plants
The work deals with comprehensive energy harvest in large wastewater treatment plants in order to make them utmost independent from external energy supply at reasonable energy cost. Thus, the complete system investigated makes not only us of biogas from sludge digester in a small combustion engine driven combined heat and power (CHP) unit which is state of the art at many places already; rather solar thermal sludge drying and subsequent incineration for a small scale steam power plant is included with usage of waste heat from CHP and steam unit for support of sludge drying. Furthermore, wind and solar based power harvest on the ground of the plant is integrated, including a hydrogen energy storage path for compensation of fluctuations, as well as small hydro generation at the clear water output. The thesis illustrates the composition and global power streams of such innovative kind of plant, describes the optimal sizing of particular plant components by use of a meta-heuristic approach, and presents several results of simulative plant operation over a full year for two examples with different conditions (Germany and Vietnam), in particular highlighting the mutual dependencies of plant devices, altogether proving that reasonable performance at vast energy independence and equitable cost can be achieved
An identification of the tolerable time-interleaved analog-to-digital converter timing mismatch level in high-speed orthogonal frequency division multiplexing systems
High-speed Terahertz communication systems has recently employed orthogonal frequency division multiplexing approach as it provides high spectral efficiency and avoids inter-symbol interference caused by dispersive channels. Such high-speed systems require extremely high-sampling time-interleaved analog-to-digital converters at the receiver. However, timing mismatch of time-interleaved analog-to-digital converters significantly causes system performance degradation. In this paper, to avoid such performance degradation induced by timing mismatch, we theoretically determine maximum tolerable mismatch levels for orthogonal frequency division multiplexing communication systems. To obtain these levels, we first propose an analytical method to derive the bit error rate formula for quadrature and pulse amplitude modulations in Rayleigh fading channels, assuming binary reflected gray code (BRGC) mapping. Further, from the derived bit error rate (BER) expressions, we reveal a threshold of timing mismatch level for which error floors produced by the mismatch will be smaller than a given BER. Simulation results demonstrate that if we preserve mismatch level smaller than 25% of this obtained threshold, the BER performance degradation is smaller than 0.5 dB as compared to the case without timing mismatch
Experimental study of the long-term shortening of reinforced concrete columns under maintaining concentric axial load
This paper presents the results of an experimental study to measure the shortening of reinforced concrete (RC) columns under long-term maintaining concentric axial load. Long-term axial deformation due to shrinkage and creep of the concrete were recorded beside deformation due to mechanical load. Eight RC cylinder - columns (content of reinforcement 1.5% and 2%) with diameter of 150 mm and height of 600 mm were tested during the period of 600 days to determine their shortening. The experimental results showed that the long-term deformation of RC columns occurs primarily during the first year of loading. The deformation creep of concrete is much greater than the shrinkage deformation. The reinforcement content has a significant effect on the long-term deformation of concrete columns
Experimental study of the long-term shortening of reinforced concrete columns under maintaining concentric axial load
This paper presents the results of an experimental study to measure the shortening of reinforced concrete (RC) columns under long-term maintaining concentric axial load. Long-term axial deformation due to shrinkage and creep of the concrete were recorded beside deformation due to mechanical load. Eight RC cylinder - columns (content of reinforcement 1.5% and 2%) with diameter of 150 mm and height of 600 mm were tested during the period of 600 days to determine their shortening. The experimental results showed that the long-term deformation of RC columns occurs primarily during the first year of loading. The deformation creep of concrete is much greater than the shrinkage deformation. The reinforcement content has a significant effect on the long-term deformation of concrete columns
Lung Volume Reduction Surgery in Patients with Heterogenous Emphysema: Selecting Perspective
BACKGROUND: Lung volume reduction surgery (LVRS) was introduced to alleviate clinical conditions in selected patients with heterogenous emphysema. Clarifying the most suitable patients for LVRS remained unclear.
AIM: This study was undertaken to specifically analyze the preoperative factor affecting to LVRS.
METHODS: The prospective study was conducted at 103 Military Hospital between July 2014 and April 2016. Severe heterogenous emphysema patients were selected to participate in the study. The information, spirometry, and body plethysmographic pulmonary function tests in 31 patients who underwent LVRS were compared with postoperative outcomes (changing in FEV1 and CAT scale).
RESULTS: Of the 31 patients, there was statistically significant difference in the outcome of functional capacity, lung function between two groups (FEV1 ≤ 50% and > 50%) (∆FEV1: 22.46 vs 18.32%; p = 0.042. ∆CAT: 6.85 vs 5.07; p = 0.048). Changes of the FEV1 and CAT scale were no statistically significant differences in three groups residual volume. Patients with total lung capacity < 140% had more improved than others (∆FEV1: 23.81 vs 15.1%; p = 0.031).
CONCLUSION: Preoperative spirometry and body plethysmographic pulmonary function tests were useful measures to selected severe heterogenous emphysema patients for LVRS. Patients with FEV1 ≤ 50%, TLC in the range of 100-140% should be selected
Evaluation of Pseudomonas stutzeri AM1 and Pseudomonas oleovorans ST1.1 isolated from shrimp pond sediments as probiotics for whiteleg shrimp, Litopenaeus vannamei culture
This study aimed to isolate the probiotic potential of nitrifying bacterial strains and to evaluate their effects on water quality and growth performance of the whiteleg shrimp, Litopenaeus vannamei. Based on an initial screening of 100 isolates identified from sediment samples, 12 strains could remove nitrogen compounds and two strains (Pseudomonas stutzeri AM1 and P. oleovorans ST1.1) showed highly efficient nitrogen removal ability. Within 96 h, total ammonia nitrogen (TAN) removal efficiency in the two strains was 28.0-31.6% and 21.5-24.9%, respectively. The water addition of 103 CFUmL-1 of P. stutzeri AM1 (T1) and P. oleovorans ST1.1 (T2) effectively reduced TAN, nitrite, nitrate, and total sulfide and increased the survival rate and biomass of shrimp. However, no significant differences were found between the control (T0) and treatment groups (T1 and T2) in the final weight, weight gain and specific growth rate of shrimp. Overall, P. stutzeri AM1 (T1) and P. oleovorans ST1.1 used as water supplements improved water quality and the survival rate of whiteleg shrimp
Phlogacanthus cornutus: chemical profiles and antioxidant effects
Phlogacanthus cornutus is a rare species and the chemical profiles and the bioactivities of this plant are unknown. In present study, the chemical components of the acetone extract as well as the antioxidant activity of acetone extract and its fractions such as n-hexane, chloroform and ethyl acetate of P. cornutus were firstly reported. A total of 33 constituents were identify in the acetone extract of this plant using Gas Chromatography/Mass Spectrometry assay, in which trans-cinnamic acid (21.26%), neophytadiene (6.36%), linolenic acid (5.86%), dihydroagathic acid (5.71%), n-hexadecanoic acid (5.53%), phytol (4.14%) and cis-cinnamic acid (3.23%) were the major compounds. The acetone extract and its fractions such as n-hexane, chloroform and ethyl acetate of P. cornutus showed DPPH radical scavenging activity with IC50 value of 234.31, 185.95, 758.65 and 458.52 µg/mL respectively
Silicon quantum-dots-based optical probe for fluorometric detection of Cr6+ ions
In this report, silicon quantum dots (SiQDs) with the NH2 functional group were synthesized with the hydrothermal method. The as-prepared SiQDs exhibit a strong fluorescence emission peak              at 441 nm when excited at 355 nm and are effectively quenched upon adding Cr6+ ions. Hence, SiQDs were used as an optical probe to detect Cr6+ ions in solutions. The crystal structure of SiQDs was characterized by using X-ray diffraction (XRD). The Fourier-transform infrared spectroscopy (FT-IR) was used to determine the linker groups on the SiQDs surface. The fluorescence spectroscopic technique with an excitation wavelength of 355 nm was used to quantify the Cr6+ ion concentration in the solutions in the range of 0.1–1000 µM. Competition from common coexisting ions, such as K+, Na+, Al3+, Zn2+, and Pb2+, was ignorable. The test with actual samples showed good linearity for the Cr6+ concentration range of 0.1–50 µM
- …