Use of tunable nanopore blockade rates to investigate colloidal dispersions

Tunable nanopores in elastomeric membranes have been used to study the dependence of ionic current blockade rate on the concentration and electrophoretic mobility of particles in aqueous suspensions. A range of nanoparticle sizes, materials and surface functionalities has been tested. Using pressure-driven flow through a pore, the blockade rate for 100 nm carboxylated polystyrene particles was found to be linearly proportional to both transmembrane pressure (controlled between 0 and 1.8 kPa) and particle concentration (between 7 x 10^8 and 4.5 x 10^10 mL^-1). This result can be accurately modelled using Nernst-Planck transport theory. Using only an applied potential across a pore, the blockade rates for carboxylic acid and amine coated 500 nm and 200 nm silica particles were found to correspond to changes in their mobility as a function of the solution pH. Scanning electron microscopy and confocal microscopy have been used to visualise changes in the tunable nanopore geometry in three dimensions as a function of applied mechanical strain. The pores observed were conical in shape, and changes in pore size were consistent with ionic current measurements. A zone of inelastic deformation adjacent to the pore has been identified as critical in the tuning process

Multiple Roles for HOXA3 in Regulating Thymus and Parathyroid Differentiation and Morphogenesis in Mouse

Hoxa3 was the first Hox gene to be mutated by gene targeting in mice and is required for the development of multiple endoderm and neural crest cell (NCC)-derived structures in the pharyngeal region. Previous studies have shown that the Hoxa3 null mutant lacks third pharyngeal pouch derivatives, the thymus and parathyroids by E18.5, and organ-specific markers are absent or downregulated during initial organogenesis. Our current analysis of the Hoxa3 null mutant shows that organ-specific domains did undergo initial patterning, but the location and timing of key regional markers within the pouch, including Tbx1, Bmp4 and Fgf8, were altered. Expression of the parathyroid marker Gcm2 was initiated but was quickly downregulated and differentiation failed; by contrast, thymus markers were delayed but achieved normal levels, concurrent with complete loss through apoptosis. To determine the cell type-specific roles of Hoxa3 in third pharyngeal pouch development, we analyzed tissue-specific mutants using endoderm and/or NCC-specific Cre drivers. Simultaneous deletion with both drivers resulted in athymia at E18.5, similar to the null. By contrast, the individual tissue-specific Hoxa3 deletions resulted in small, ectopic thymi, although each had a unique phenotype. Hoxa3 was primarily required in NCCs for morphogenesis. In endoderm, Hoxa3 temporally regulated initiation of the thymus program and was required in a cell-autonomous manner for parathyroid differentiation. Furthermore, Hoxa3 was required for survival of third pharyngeal pouch-derived organs, but expression in either tissue was sufficient for this function. These data show that Hoxa3 has multiple complex and tissue-specific functions during patterning, differentiation and morphogenesis of the thymus and parathyroids

Label-free detection of exosomes using surface plasmon resonance biosensor

The development of a sensitive and specific detection platform for exosomes is highly desirable as they are believed to transmit vital tumour-specific information (mRNAs, microRNAs, and proteins) to remote cells for secondary metastasis. Herein, we report a simple method for the real-time and label-free detection of clinically relevant exosomes using a surface plasmon resonance (SPR) biosensor. Our method shows high specificity in detecting BT474 breast cancer cell-derived exosomes particularly from complex biological samples (e.g. exosome spiked in serum). This approach exhibits high sensitivity by detecting as low as 8280 exosomes/μL which may potentially be suitable for clinical analysis. We believe that this label-free and real-time method along with the high specificity and sensitivity may potentially be useful for clinical settings

Universality for 2D Wedge Wetting

We study 2D wedge wetting using a continuum interfacial Hamiltonian model which is solved by transfer-matrix methods. For arbitrary binding potentials, we are able to exactly calculate the wedge free-energy and interface height distribution function and, thus, can completely classify all types of critical behaviour. We show that critical filling is characterized by strongly universal fluctuation dominated critical exponents, whilst complete filling is determined by the geometry rather than fluctuation effects. Related phenomena for interface depinning from defect lines in the bulk are also considered.Comment: 4 pages, 1 figur

Geometry dominated fluid adsorption on sculptured substrates

Experimental methods allow the shape and chemical composition of solid surfaces to be controlled at a mesoscopic level. Exposing such structured substrates to a gas close to coexistence with its liquid can produce quite distinct adsorption characteristics compared to that occuring for planar systems, which may well play an important role in developing technologies such as super-repellent surfaces or micro-fluidics. Recent studies have concentrated on adsorption of liquids at rough and heterogeneous substrates and the characterisation of nanoscopic liquid films. However, the fundamental effect of geometry has hardly been addressed. Here we show that varying the shape of the substrate can exert a profound influence on the adsorption isotherms allowing us to smoothly connect wetting and capillary condensation through a number of novel and distinct examples of fluid interfacial phenomena. This opens the possibility of tailoring the adsorption properties of solid substrates by sculpturing their surface shape.Comment: 6 pages, 4 figure

Modified critical correlations close to modulated and rough surfaces

Correlation functions are sensitive to the presence of a boundary. Surface modulations give rise to modified near surface correlations, which can be measured by scattering probes. To determine these correlations, we develop a perturbative calculation in deformations in height from a flat surface. The results, combined with a renormalization group around four dimensions, are also used to predict critical behavior near a self-affinely rough surface. We find that a large enough roughness exponent can modify surface critical behavior.Comment: 4 pages, 1 figure. Revised version as published in Phys. Rev. Lett. 86, 4596 (2001

Gold colloidal nanoparticle electrodeposition on a silicon surface in a uniform electric field

The electrodeposition of gold colloidal nanoparticles on a silicon wafer in a uniform electric field is investigated using scanning electron microscopy and homemade electrochemical cells. Dense and uniform distributions of particles are obtained with no aggregation. The evolution of surface particle density is analyzed in relation to several parameters: applied voltage, electric field, exchanged charge. Electrical, chemical, and electrohydrodynamical parameters are taken into account in describing the electromigration process

Correlation functions near Modulated and Rough Surfaces

In a system with long-ranged correlations, the behavior of correlation functions is sensitive to the presence of a boundary. We show that surface deformations strongly modify this behavior as compared to a flat surface. The modified near surface correlations can be measured by scattering probes. To determine these correlations, we develop a perturbative calculation in the deformations in height from a flat surface. Detailed results are given for a regularly patterned surface, as well as for a self-affinely rough surface with roughness exponent $\zeta$. By combining this perturbative calculation in height deformations with the field-theoretic renormalization group approach, we also estimate the values of critical exponents governing the behavior of the decay of correlation functions near a self-affinely rough surface. We find that for the interacting theory, a large enough $\zeta$ can lead to novel surface critical behavior. We also provide scaling relations between roughness induced critical exponents for thermodynamic surface quantities.Comment: 31 pages, 2 figure

Bisulfite-free analysis of 5MeC-binding proteins and locus-specific methylation density using a microparticle-based flow cytometry assay

DNA methylation analysis is emerging as a new technique with potential capabilities for early cancer detection. However, current state-of-the-art techniques are not easily translatable into routine clinical methods. Herein we describe a bead-based flow cytometry assay which combines DNA hybridization to microparticles with 5MeC-specific proteins/antibodies. These assays can be used to study the binding properties of current and emerging 5MeC-binding proteins and may also have potential in the measurement of 5MeC density in clinical samples for cancer detection

Electrochemically controlled growth and positioning of suspended collagen membranes

Two independently recognized in vitro polymer aggregation variables, electric field and pH, can be used in concert to produce suspended membranes from solutions of type I collagen monomers, without need of a supporting substrate. A collagen network film can form at the alkalineacidic pH interface created during the normal course of water electrolysis with parallel plate electrodes, and the anchoring location can be controlled by adjusting the bulk electrolyte pH. Electrosynthesized films remain intact upon drying and rehydration and function as ion separation membranes even in submillimeter channels. This approach could benefit lab-on-a-chip technologies for rational placement of membranes in microfluidic devices