Measurement of outflow facility using iPerfusion

Elevated intraocular pressure (IOP) is the predominant risk factor for glaucoma, and reducing IOP is the only successful strategy to prevent further glaucomatous vision loss. IOP is determined by the balance between the rates of aqueous humour secretion and outflow, and a pathological reduction in the hydraulic conductance of outflow, known as outflow facility, is responsible for IOP elevation in glaucoma. Mouse models are often used to investigate the mechanisms controlling outflow facility, but the diminutive size of the mouse eye makes measurement of outflow technically challenging. In this study, we present a new approach to measure and analyse outflow facility using iPerfusion™, which incorporates an actuated pressure reservoir, thermal flow sensor, differential pressure measurement and an automated computerised interface. In enucleated eyes from C57BL/6J mice, the flow-pressure relationship is highly non-linear and is well represented by an empirical power law model that describes the pressure dependence of outflow facility. At zero pressure, the measured flow is indistinguishable from zero, confirming the absence of any significant pressure independent flow in enucleated eyes. Comparison with the commonly used 2-parameter linear outflow model reveals that inappropriate application of a linear fit to a non-linear flow-pressure relationship introduces considerable errors in the estimation of outflow facility and leads to the false impression of pressure-independent outflow. Data from a population of enucleated eyes from C57BL/6J mice show that outflow facility is best described by a lognormal distribution, with 6-fold variability between individuals, but with relatively tight correlation of facility between fellow eyes. iPerfusion represents a platform technology to accurately and robustly characterise the flow-pressure relationship in enucleated mouse eyes for the purpose of glaucoma research and with minor modifications, may be applied in vivo to mice, as well as to eyes from other species or different biofluidic systems

Economic analysis of royalactin production under uncertainty: Evaluating the effect of parameter optimization.

Royalactin is a protein with several different potential uses in humans. Research, in insects and in mammalian cells, has shown that it can accelerate cell division and prevent apoptosis. The method of action is through the use of the epidermal growth factor receptor, which is present in humans. Potential use in humans could be to lower cholesterolemic levels in blood, and to elicit similar effects to those seen in bees, e.g., increased lifespan. Mass production of Royalactin has not been accomplished, though a recent article presented a Pichia pastoris fermentation and recovery by aqueous two-phase systems at laboratory scale as a possible basis for production. Economic modelling is a useful tool with which compare possible outcomes for the production of such a molecule and in particular, to locate areas where additional research is needed and optimization may be required. This study uses the BioSolve software to perform an economic analysis on the scale-up of the putative process for Royalactin. The key parameters affecting the cost of production were located via a sensitivity analysis and then evaluated by Monte Carlo analysis. Results show that if titer is not optimized the strategy to maintain a low cost of goods is process oriented. After optimization of this parameter the strategy changes to a product-oriented and the target output becomes the critical parameter determining the cost of goods. This study serves to provide a framework for the evaluation of strategies for future production of Royalactin, by analyzing the factors that influence its cost of manufacture. © 2015 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 2015

Helminth species richness in wild wood mice, Apodemus sylvaticus, is enhanced by the presence of the intestinal nematode Heligmosomoides polygyrus

We analysed 3 independently collected datasets of fully censused helminth burdens in wood mice, Apodemus sylvaticus, testing the a priori hypothesis of Behnke et al. (2005) that the presence of the intestinal nematode Heligmosomoides polygyrus predisposes wood mice to carrying other species of helminths. In Portugal, mice carrying H. polygyrus showed a higher prevalence of other helminths but the magnitude of the effect was seasonal. In Egham, mice with H. polygyrus showed a higher prevalence of other helminth species, not confounded by other factors. In Malham Tarn, mice carrying H. polygyrus were more likely to be infected with other species, but only among older mice. Allowing for other factors, heavy residual H. polygyrus infections carried more species of other helminths in both the Portugal and Egham data; species richness in Malham was too low to conduct a similar analysis, but as H. polygyrus worm burdens increased, so the prevalence of other helminths also increased. Our results support those of Behnke et al. (2005), providing firm evidence that at the level of species richness a highly predictable element of co-infections in wood mice has now been defined: infection with H. polygyrus has detectable consequences for the susceptibility of wood mice to other intestinal helminth species

Geometric derivation of the microscopic stress: a covariant central force decomposition

We revisit the derivation of the microscopic stress, linking the statistical mechanics of particle systems and continuum mechanics. The starting point in our geometric derivation is the Doyle-Ericksen formula, which states that the Cauchy stress tensor is the derivative of the free-energy with respect to the ambient metric tensor and which follows from a covariance argument. Thus, our approach to define the microscopic stress tensor does not rely on the statement of balance of linear momentum as in the classical Irving-Kirkwood-Noll approach. Nevertheless, the resulting stress tensor satisfies balance of linear and angular momentum. Furthermore, our approach removes the ambiguity in the definition of the microscopic stress in the presence of multibody interactions by naturally suggesting a canonical and physically motivated force decomposition into pairwise terms, a key ingredient in this theory. As a result, our approach provides objective expressions to compute a microscopic stress for a system in equilibrium and for force-fields expanded into multibody interactions of arbitrarily high order. We illustrate the proposed methodology with molecular dynamics simulations of a fibrous protein using a force-field involving up to 5-body interactions

Localized and controlled delivery of nitric oxide to the conventional outflow pathway via enzyme biocatalysis: towards therapy for Glaucoma

Nitric oxide (NO) has been shown to lower intraocular pressure (IOP), however its therapeutic effects on outflow physiology are location- and dose-dependent. Here, a NO delivery platform that directly targets the resistance-generating region of the conventional outflow pathway and locally liberates a controlled dose of NO is reported. An increase in outflow facility (decrease in IOP) is demonstrated in mouse model

Economic analysis of Uricase production under uncertainty: Contrast of chromatographic purification and aqueous two-phase extraction (with and without PEG recycle)

Uricase is the enzyme responsible for the breakdown of uric acid, the key molecule leading to gout in humans, into allantoin, but it is absent in humans. It has been produced as a PEGylated pharmaceutical where the purification is performed through three sequential chromatographic columns. More recently an aqueous two-phase system (ATPS) was reported that could recover Uricase with high yield and purity. Although the use of ATPS can decrease cost and time, it also generates a large amount of waste. The ability, therefore, to recycle key components of ATPS is of interest. Economic modelling is a powerful tool that allows the bioprocess engineer to compare possible outcomes and find areas where further research or optimization might be required without recourse to extensive experiments and time. This research provides an economic analysis using the commercial software BioSolve of the strategies for Uricase production: chromatographic and ATPS, and includes a third bioprocess that utilises material recycling. The key parameters that affect the process the most were located via a sensitivity analysis and evaluated with a Monte Carlo analysis. Results show that ATPS is far less expensive than chromatography, but that there is an area where the cost of production of both bioprocesses overlap. Furthermore, recycling doesn't impact the cost of production. This study serves to provide a framework for the economic analysis of Uricase production using alternative techniques. This article is protected by copyright. All rights reserved

Evidence of trauma in a ca. 1-million-year-old patella of Homo antecessor, Gran Dolina-Atapuerca (Spain)

We present the palaeopathological study of a left patella (ATD6-56) belonging to the Early Pleistocene species Homo antecessor (Atapuerca-Gran Dolina, Spain). The abnormal morphology observed in the inferior margin of the patella is an osseous overgrowth (osteophyte). Macroscopic and microscopic techniques, including microtomography and zoom stereomicroscope, were used to describe the lesion. Externally, the osteophyte has a smooth and porous texture; the boundary between the more radiolucent osteophyte and the normal bone can be identified in X-ray images. We suggest that the observed signs could be secondary to a local trauma. The lesion would have involved either the bone or related soft tissues of the left limb, possibly affecting the stability of the joint. Consequently, the individual's knee would have suffered an abnormal mechanical load that could have eventually triggered osteoarthritic changes. This is also supported by the lack of changes observed in the associated right patella (ATD6-22)

Hominin teeth from the Middle Pleistocene site of Yiyuan, Eastern China

In 1981-1982, some hominin fossils, including a relatively complete skull and seven isolated teeth, were recovered from the Middle Pleistocene site of Yiyuan in Eastern China. In the present study we provide a detailed metric and morphological comparison of the Yiyuan dental sample in order to characterize better the variability of the human populations that inhabited China during the Middle Pleistocene. Aside from taxonomic and phylogenetic questions, the lack of understanding and/or knowledge about the morphological variability of these populations have caused concern about the human versus non-human nature of some of the hominin dental remains found in East Asia during the Early and the Middle Pleistocene. Thus, our study aims to present a detailed description and comparison of the Yiyuan isolated teeth to 1) discuss and support their human nature and 2) to explore their taxonomic affinities with regard to other penecontemporaneous populations from Asia. Our results clearly differentiate the Yiyuan sample from Pongo specimens and support a human attribution for the Yiyuan material. Our analyses also suggest that the Yiyuan teeth form a morphologically coherent group together with samples from Zhoukoudian, Chaoxian and Hexian. They are different from the more derived specimens from Panxian Dadong, suggesting a pattern of biogeographic isolation and different evolutionary trends between northern and southern China during the Middle Pleistocene. In addition, and despite sharing a common morphological bauplan with Homo erectus sensu stricto (s.s.), the Yiyuan, Zhoukoudian and Hexian teeth are also different from the Indonesian Early Pleistocene samples. In particular, the expression of a highly crenulated or dendritic enamel-dentine surface could be unique to these groups. Our study supports the notion that the taxonomy of the Pleistocene hominins from Asia may have been oversimplified. Future studies should explore the variability of the Asian specimens and reconsider whether all the samples can be attributed to H. erectus s.s

Trace elements and lead isotopic composition of copper deposits from the eastern part of the Internal Zone of the Betic Cordillera (SE Iberia): application to provenance of archaeological materials

This paper presents trace element compositions and lead isotope analyses by MC-ICP-MS of 34 copper ore samples from the Internal Zone of the Betic Range, Southeast Spain. Samples were collected during a fieldwork campaign in the mines of Cerro Minado, Pinar de Bédar, Sierra Cabrera and Sierra Almagrera/Herrerías. Most samples are copper oxide minerals from the near surface alteration of the sulfide ore deposits. The aim of the study is to supplement the existing reference data bank on lead isotopic compositions of ancient copper mines from the Iberian Peninsula, complementing this data with trace element compositions. The latter can be useful for discriminating when isotopic overlaps occur. This characterisation will be of great usefulness for provenancing further archaeological materials. Lead isotope ratios range from 18.603 to 20.327 (206Pb/204Pb); from 15.685 to 15.779 (207Pb/204Pb) and from 38.728 to 39.702 (208Pb/204Pb). Data from the literature analysed by TIMS have been also considered for comparison although the larger analytical error is highlighted, especially for isotope 204Pb. The lead isotopic signature of the analysed samples shows three separate isotopic fields. These fields are also consistent with differences in compositions evidenced by principal component analyses

Transmission of Foot-and-Mouth Disease Virus during the Incubation Period in Pigs.

Understanding the quantitative characteristics of a pathogen's capability to transmit during distinct phases of infection is important to enable accurate predictions of the spread and impact of a disease outbreak. In the current investigation, the potential for transmission of foot-and-mouth disease virus (FMDV) during the incubation (preclinical) period of infection was investigated in seven groups of pigs that were sequentially exposed to a group of donor pigs that were infected by simulated-natural inoculation. Contact-exposed pigs were comingled with infected donors through successive 8-h time slots spanning from 8 to 64 h post-inoculation (hpi) of the donor pigs. The transition from latent to infectious periods in the donor pigs was clearly defined by successful transmission of foot-and-mouth disease (FMD) to all contact pigs that were exposed to the donors from 24 hpi and later. This onset of infectiousness occurred concurrent with detection of viremia, but approximately 24 h prior to the first appearance of clinical signs of FMD in the donors. Thus, the latent period of infection ended approximately 24 h before the end of the incubation period. There were significant differences between contact-exposed groups in the time elapsed from virus exposure to the first detection of FMDV shedding, viremia, and clinical lesions. Specifically, the onset and progression of clinical FMD were more rapid in pigs that had been exposed to the donor pigs during more advanced phases of disease, suggesting that these animals had received a higher effective challenge dose. These results demonstrate transmission and dissemination of FMD within groups of pigs during the incubation period of infection. Furthermore, these findings suggest that under current conditions, shedding of FMDV in oropharyngeal fluids is a more precise proxy for FMDV infectiousness than clinical signs of infection. These findings may impact modeling of the propagation of FMD outbreaks that initiate in pig holdings and should be considered when designing FMD control strategies