33 research outputs found
Development of Efficient Techniques for the Analysis and Design of Antennas in Dual-Reflectarray Configuration
This thesis contributes to the analysis and design of printed reflectarray antennas. The main part of the work is focused on the analysis of dual offset antennas comprising two reflectarray surfaces, one of them acts as sub-reflector and the second one acts as mainreflector. These configurations introduce additional complexity in several aspects respect to conventional dual offset reflectors, however they present a lot of degrees of freedom that can be used to improve the electrical performance of the antenna. The thesis is organized in four parts: the development of an analysis technique for dualreflectarray antennas, a preliminary validation of such methodology using equivalent reflector systems as reference antennas, a more rigorous validation of the software tool by manufacturing and testing a dual-reflectarray antenna demonstrator and the practical design of dual-reflectarray systems for some applications that show the potential of these kind of configurations to scan the beam and to generate contoured beams. In the first part, a general tool has been implemented to analyze high gain antennas which are constructed of two flat reflectarray structures. The classic reflectarray analysis based on MoM under local periodicity assumption is used for both sub and main reflectarrays, taking into account the incident angle on each reflectarray element. The incident field on the main reflectarray is computed taking into account the field radiated by all the elements on the sub-reflectarray.. Two approaches have been developed, one which employs a simple approximation to reduce the computer run time, and the other which does not, but offers in many cases, improved accuracy. The approximation is based on computing the reflected field on each element on the main reflectarray only once for all the fields radiated by the sub-reflectarray elements, assuming that the response will be the same because the only difference is a small variation on the angle of incidence. This approximation is very accurate when the reflectarray elements on the main reflectarray show a relatively small sensitivity to the angle of incidence. An extension of the analysis technique has been implemented to study dual-reflectarray antennas comprising a main reflectarray printed on a parabolic surface, or in general in a curved surface. In many applications of dual-reflectarray configurations, the reflectarray elements are in the near field of the feed-horn. To consider the near field radiated by the horn, the incident field on each reflectarray element is computed using a spherical mode expansion. In this region, the angles of incidence are moderately wide, and they are considered in the analysis of the reflectarray to better calculate the actual incident field on the sub-reflectarray elements. This technique increases the accuracy for the prediction of co- and cross-polar patterns and antenna gain respect to the case of using ideal feed models. In the second part, as a preliminary validation, the proposed analysis method has been used to design a dual-reflectarray antenna that emulates previous dual-reflector antennas in Ku and W-bands including a reflectarray as subreflector. The results for the dualreflectarray antenna compare very well with those of the parabolic reflector and reflectarray subreflector; radiation patterns, antenna gain and efficiency are practically the same when the main parabolic reflector is substituted by a flat reflectarray. The results show that the gain is only reduced by a few tenths of a dB as a result of the ohmic losses in the reflectarray. The phase adjustment on two surfaces provided by the dual-reflectarray configuration can be used to improve the antenna performance in some applications requiring multiple beams, beam scanning or shaped beams. Third, a very challenging dual-reflectarray antenna demonstrator has been designed, manufactured and tested for a more rigorous validation of the analysis technique presented. The proposed antenna configuration has the feed, the sub-reflectarray and the main-reflectarray in the near field one to each other, so that the conventional far field approximations are not suitable for the analysis of such antenna. This geometry is used as benchmarking for the proposed analysis tool in very stringent conditions. Some aspects of the proposed analysis technique that allow improving the accuracy of the analysis are also discussed. These improvements include a novel method to reduce the inherent cross polarization which is introduced mainly from grounded patch arrays. It has been checked that cross polarization in offset reflectarrays can be significantly reduced by properly adjusting the patch dimensions in the reflectarray in order to produce an overall cancellation of the cross-polarization. The dimensions of the patches are adjusted in order not only to provide the required phase-distribution to shape the beam, but also to exploit the crosses by zero of the cross-polarization components. The last part of the thesis deals with direct applications of the technique described. The technique presented is directly applicable to the design of contoured beam antennas for DBS applications, where the requirements of cross-polarisation are very stringent. The beam shaping is achieved by synthesithing the phase distribution on the main reflectarray while the sub-reflectarray emulates an equivalent hyperbolic subreflector. Dual-reflectarray antennas present also the ability to scan the beam over small angles about boresight. Two possible architectures for a Ku-band antenna are also described based on a dual planar reflectarray configuration that provides electronic beam scanning in a limited angular range. In the first architecture, the beam scanning is achieved by introducing a phase-control in the elements of the sub-reflectarray and the mainreflectarray is passive. A second alternative is also studied, in which the beam scanning is produced using 1-bit control on the main reflectarray, while a passive subreflectarray is designed to provide a large focal distance within a compact configuration. The system aims to develop a solution for bi-directional satellite links for emergency communications. In both proposed architectures, the objective is to provide a compact optics and simplicity to be folded and deployed
Measurements of a Multi Feed Reflector Antenna for SAR Systems Based on Digital Beam Forming
In the last years, the Synthetic Aperture Radar (SAR) systems evolution migrates toward the
use of multi-channel systems based on Digital Beam Forming (DBF) techniques [1]. This tendendy
allows fulfilling stringent SAR requirements, providing high spatial resolution within a wide swath.
Moreover, the combination of DBF techniques with parabolic reflector antennas merges both
flexibility and high antenna gain ending up in a high versatile system [2].
One of the main parts in a Digital Beam Forming (DBF) Synthetic Aperture Radar system is
constituted by the antenna. An accurate characterization of the antenna radiation pattern is of high
interest for the calibration of the system which guarantees the performance and versatility of the
DBF network. This paper describes the measurements of a multi- feed single offset reflector antenna
designed in X-band. The antenna is part of an on ground multi-channel radar system used to
demonstrate ind investigate DBF techniques at HR/DL
Study of Different Multi-Beam Reflectarray Configurations
Dual-reflectarray configurations exhibits some advantages from both mechanical and electrical points of view with respect to reflector antennas. Dual-reflectarray antennas present a reduced volume and the capability of being easily folded. These antenna configurations provide phase control on both reflectarray surfaces, which can be used to improve the antenna performance for multiple beams, beam scanning or shaped beams. An electronic controllable reflectarray can be used as subreflector to drastically reduce the number of elements to be controlled for applications requiring steering or reconfiguration of the beam, such as Synthetic Aperture Radar applications. Three antenna configurations using either passive or reconfigurable reflectarrays as sub and main reflector in different frequency bands for beam scanning applications are shown
Bifocal design procedure for dual-reflectarray antennas in offset configurations
This letter presents a new bifocal design procedure for dual-reflectarray antennas (DRAAs) in offset configurations. The technique starts by considering an axially symmetric geometry with the reflectarrays placed in parallel planes, which allows the rotation of a two-dimensional bifocal design around the symmetry axis. To reach a more compact configuration and to obtain smoother phase distributions, the reflectarrays are tilted and their phases are adjusted by means of a ray-tracing routine. The technique has been validated by numerical simulations through the comparison with a previous center-fed dual-reflectarray prototype. Finally, the simulations of an offset DRAA with tilted reflectarrays are presented, providing 0.56° beam spacing at 20 GHz for multispot satellite applications in Ka-band.Agencia Estatal de Investigación | Ref. TEC2016-75103-C2-1-REuropean Space Agency | Ref. 4000117113/16/NL/A
A Transportable Reflectarray Antenna for Satellite Ku-band Emergency Communications
The design of a Ku-band reconfigurable reflectarray antenna for emergency satellite communications is presented. Bidirectional high data rate satellite links are needed in emergency conditions where other telecommunication infrastructures are not available. In order to operate in this type of scenario, an antenna should be deployable, transportable, and easily repointable. The need of an automatic and fast satellite location and pointing system leads to a completely electronic reconfigurable antenna. The operative bandwidth is from 10.7 to 12.5 GHz for reception and from 14 up to 14.5 GHz for transmission (30% of relative bandwidth). The selected antenna architecture is based on a dual reflectarray system comprising a passive subreflectarray and an active main reflectarray made of reconfigurable 1-bit elementary cells based on PIN diodes
Application of bifocal concept to dual reflectarray configurations for multi-beam satellite antennas in Ka-band
This contribution describes the design of a multi-beam dual reflectarray antenna for operation in transmission in Ka-band (20 GHz). The bifocal design concept has been used to obtain an improved performance for the off-axis beams with respect to the single focused antenna. The required phase-shift distributions are initially obtained with the reflectarrays in parallel planes, and then adjusted to compensate the tilting of both reflectarrays in the final Cassegrain configuration. The simulated radiation patterns in the elevation and azimuth orthogonal planes have been calculated for the two beams generated by the focuses, and then the multi-beam performance of the antenna has been evaluated
X/Ka-Band Dual-Polarized Digital Beamforming Synthetic Aperture Radar
This paper presents a digital beamforming (DBF) synthetic aperture radar (SAR) for future spaceborne earth observation systems. The objective of the DBF-SAR system is to achieve a low cost, lightweight, low-power consumption, and dual-band (X/Ka) dual-polarized module for the next-generation spaceborne SAR system in Europe. The architectures and modules of the proposed DBF-SAR system are designed according to a realistic mission scenario, which is compatible with the future small/microsatellites platforms. This system fills an important gap in the conception of the future DBF-SAR, facilitating a high level of integration and complexity reduction. The proposed system is considered not only the first demonstrator of a receive-only spaceborne DBF system, but also the first X/Ka-band dual-polarized SAR system with shared aperture. This paper presents a description of the proposed instrument hardware and first experimental validations. The concept and design of the DBF multistatic SAR system are discussed and presented first, followed by the design of subsystems such as DBF networks, microwave integrated circuit, and antennas. Simulated and measured results of the subsystems are presented, demonstrating that the proposed SAR instrument architecture is well-suited for the future SAR applications
Precariedad, exclusión social y modelo de sociedad: lógicas y efectos subjetivos del sufrimiento social contemporáneo (IV). Innovación docente en Filosofía
El PIMCD “Precariedad, exclusión social y modelo de sociedad: lógicas y efectos subjetivos del sufrimiento social contemporáneo (IV). Innovación docente en Filosofía” constituye la cuarta edición de un PIMCD que ha recibido financiación en las últimas convocatorias de PIMCD UCM, de los que se han derivado actividades de formación para estudiantes de Grado, Máster y Doctorado y al menos 3 publicaciones colectivas publicadas por Ediciones Complutense, Siglo XXI y Palgrave McMillan
Precariedad, exclusión social y diversidad funcional (discapacidad): lógicas y efectos subjetivos del sufrimiento social contemporáneo (III). Innovación docente en Filosofía
El PIMCD Precariedad, exclusión social y diversidad funcional (discapacidad): lógicas y efectos subjetivos del sufrimiento social contemporáneo (III). Innovación docente en Filosofía se ocupa de conceptos que generalmente han tendido a ser eludidos en la enseñanza académica de filosofía. Se trata de la tercera edición de un PIMCD que ha venido recibiendo financiación en las últimas convocatorias PIMCD UCM, de los que se han derivado publicaciones colectivas publicadas por Ediciones Complutense y Siglo XXI
Dual-Polarization Ku-Band Compact Spaceborne Antenna Based on Dual-Reflectarray Optics
This article demonstrated an accurate analysis technique for dual-reflectarray antennas that take into account the angle of incidence of the impinging electric field on the main reflectarray cells. The reflected field on the sub and the main reflectarray surfaces is computed using Method of Moments in the spectral domain and assuming local periodicity. The sub-reflectarray is divided into groups of elements and the field radiated by each group is used to compute the incident and reflected field on the main reflectarray cells. A 50-cm demonstrator in Ku-band that provides European coverage has been designed, manufactured and tested to validate the analysis technique. The measured radiation patterns match the simulations and they fulfill the coverage requirements, achieving a cross-polar discrimination better than 25 dB in the frequency range: 12.975–14.25 GHz