Process and apparatus for growing a crystal ribbon

A process and apparatus is disclosed for growing a crystal ribbon of a substance of theoretically infinite length from a melt of the substance. A pair of fixedly positioned edge defining members are partially submerged into the melt so as to break the surface of the melt at a predetermined distance from one another. The edge defining members are wettable by the melt and the predetermined distance substantially corresponds to the width of the crystal ribbon to be grown. The crystal ribbon is grown by contacting the surface of the melt with a seed ribbon between the edge defining members whereby a meniscus of the melt is established on the seed ribbon. The meniscus is stabilized by the meniscus of the melt on the edge defining members. Pulling the seed crystal ribbon away from the melt results in continuous growth of the crystal ribbon

Coplanar back contacts for thin silicon solar cells

A process for fabricating 2 to 3 mil wraparound solar cells was formulated. Sample thin wraparound cells were fabricated using this process. The process used a reinforced perimeter construction to reduce the breakage that occurs during handling of the wafers. A retracting piston post was designed and fabricated to help minimize the breakage that occurs during the screen printing process. Two alternative methods of applying the aluminum back surface field were investigated. In addition to the standard screen printed back surface field, both spin-on and evaporated aluminum techniques were researched. Neither spin-on nor evaporated aluminum made any noticeable improvement over the screen printing technique. A fine screen mesh was chosen for the application of the aluminum paste back surface field. The optimum time and temperature for firing the aluminum turned out to be thirty seconds at 850 C. The development work on the dielectric included looking at three dielectrics for the wraparound application. Transene 1000, Thick Film Systems 1126RCB and an in house formulation 61-2-2A were all tested. Cells with pre-dielectric thickness of 3.0-0-3.5 mils using Transene 1000 as the wraparound dielectric and the procedure outlined above showed an average efficiency of 10.7 percent. Thinner cells were fabricated, but had an unacceptable yield and efficiency

Wildland inventory and resource modeling for Douglas and Carson City Counties, Nevada, using LANDSAT and digital terrain data

The potential of using LANDSAT satellite imagery to map and inventory pinyon-juniper desert forest types in Douglas and Carson City Counties, Nevada was demonstrated. Specific map and statistical products produced include land cover, mechanical operations capability, big game winter range habitat, fire hazard, and forest harvestability. The Nevada Division of Forestry determined that LANDSAT can produce a reliable and low-cost resource data. Added benefits become apparent when the data are linked to a geographical information system (GIS) containing existing ownership, planning, elevation, slope, and aspect information

Public understanding and awareness of and response to monkeypox virus outbreak: A cross-sectional survey of the most affected communities in the United Kingdom during the 2022 public health emergency.

OBJECTIVES: Our objective was to examine the public response to public health and media messaging during the human monkeypox virus (MPXV) outbreak in the UK, focusing on at-risk communities. METHODS: A co-produced, cross-sectional survey was administered in June and July 2022 using community social media channels and the Grindr dating app. Basic descriptive statistics, logistic regression, and odds ratio p values are presented. RESULTS: Of 1932 survey respondents, 1750 identified as men, 88 as women, and 64 as gender non-conforming. Sexual identity was described as gay/lesbian/queer (80%), bisexual (12%), heterosexual (4%), and pansexual (2%); 39% were aged <40 years; 71% self-identified as White, 3% as Black, 8% as Asian, 2%as LatinX, and 11% as 'Mixed or Other' heritage groups. In total, 85% were employed and 79% had completed higher education. A total of 7% of respondents identified themselves as living with HIV. Overall, 34% reported limited understanding of public health information, 52% considered themselves at risk, 61% agreed that people with MPXV should isolate for 21 days, 49% reported they would first attend a sexual health clinic if symptomatic, 86% reported they would accept a vaccine, and 59% believed that MPXV originated from animals. The most trusted sources of information were healthcare professionals (37%), official health agencies (29%), and mainstream media (12%). CONCLUSIONS: Vaccine acceptability was very high, yet the understanding and acceptance of public health information varied. Social determinants of health inequalities already shaping the UK landscape risk were compounded in this new emergency. Engagement with structurally disadvantaged members of affected communities and better dissemination of public health messaging by trusted healthcare professionals are essential for the public health response

Stark Broadening of the B III 2s-2p Lines

We present a quantum-mechanical calculation of Stark line widths from electron-ion collisions for the $2s_{1/2}-2p_{1/2,3/2}$, lambda = 2066 and 2067 A, resonance transitions in B III. The results confirm the previous quantum-mechanical R-matrix calculations but contradict recent measurements and semi-classical and some semi-empirical calculations. The differences between the calculations can be attributed to the dominance of small L partial waves in the electron-atom scattering, while the large Stark widths inferred from the measurements would be substantially reduced if allowance is made for hydrodynamic turbulence from high Reynolds number flows and the associated Doppler broadening.Comment: 21 pages, 4 figures; to be published in Phys. Rev.

Design of an Agile Unmanned Combat Vehicle - A Product of the DARPA UGCV Program

The unmanned ground combat vehicle (UGCV) design evolved by the SAIC team on the DARPA UGCV Program is summarized in this paper. This UGCV design provides exceptional performance against all of the program metrics and incorporates key attributes essential for high performance robotic combat vehicles. This performance includes protection against 7.62 mm threats, C130 and CH47 transportability, and the ability to accept several relevant weapons payloads, as well as advanced sensors and perception algorithms evolving from the PerceptOR program. The UGCV design incorporates a combination of technologies and design features, carefully selected through detailed trade studies, which provide optimum performance against mobility, payload, and endurance goals without sacrificing transportability, survivability, or life cycle cost. The design was optimized to maximize performance against all Category I metrics. In each case, the performance of this design was validated with detailed simulations, indicating that the vehicle exceeded the Category I metrics. Mobility metrics were analyzed using high fidelity VisualNastran vehicle models, which incorporate the suspension control algorithms and controller cycles times. DADS/Easy 5 3-D models and ADAMS simulations were also used to validate vehicle dynamics and control algorithms during obstacle negotiation

First observations of SPEAR-induced artificial backscatter from CUTLASS and the EISCAT Svalbard radars

Results are presented from the first two active experimental campaigns undertaken by the new SPEAR (Space Plasma Exploration by Active Radar) high-power system that has recently become operational on Spitzbergen, in the Svalbard archipelago. SPEAR&apos;s high-power beam was used to excite artificial enhancements in the backscatter detected by the ESR (EISCAT Svalbard Radar) parallel to the geomagnetic field, as well as coherent backscatter detected by both of the CUTLASS (Co-operative UK Twin Located Auroral Sounding System) coherent radars, in directions orthogonal to the geomagnetic field. The ESR detected both enhanced ion-lines as well as enhanced plasma-lines, that were sustained for the whole period when SPEAR was transmitting ordinary mode radio waves, at frequencies below the maximum F-region plasma frequency. On a number of occasions, coherent backscatter was also observed in one or in both of the CUTLASS radars, in beams that intersected the heated volume. Although the levels of enhanced backscatter varied considerably in time, it appeared that ion-line, plasma-line and coherent backscatter were all excited simultaneously, in contrast to what has typically been reported at Troms&amp;#248;, during EISCAT heater operations. A description of the technical and operational aspects of the new SPEAR system is also included