787 research outputs found
Semantic-based decision support for remote care of dementia patients
This paper investigates the challenges in developing a semantic-based Dementia Care Decision Support System based on the non-intrusive monitoring of the patient's behaviour. Semantic-based approaches are well suited for modelling context-aware scenarios similar to Dementia care systems, where the patient's dynamic behaviour observations (occupants movement, equipment use) need to be analysed against the semantic knowledge about the patient's condition (illness history, medical advice, known symptoms) in an integrated knowledgebase. However, our research findings establish that the ability of semantic technologies to reason upon the complex interrelated events emanating from the behaviour monitoring sensors to infer knowledge assisting medical advice represents a major challenge. We attempt to address this problem by introducing a new approach that relies on propositional calculus modelling to segregate complex events that are amenable for semantic reasoning from events that require pre-processing outside the semantic engine before they can be reasoned upon. The event pre-processing activity also controls the timing of triggering the reasoning process in order to further improve the efficiency of the inference process. Using regression analysis, we evaluate the response-time as the number of monitored patients increases and conclude that the incurred overhead on the response time of the prototype decision support systems remains tolerable
Recommended from our members
Echo state network for occupancy prediction and pattern mining in intelligent environment
Pattern analysis and prediction of sensory data is becoming an increasing scientific challenge and a massive economical interest supports the need for better pattern mining techniques. The aim of this paper is to investigate efficient mining of useful information from a sensor network representing an ambient intelligence environment. The goal is to extract and predict behavioral patterns of a person in his/her daily activities by analyzing the time series data representing the behaviour of the occupant, generated using occupancy sensors. There are various techniques available for analysis and prediction of a continuous time series signal. However, the occupancy signal is represented by a binary time series where only discrete values of a signal are available. To build the prediction model, recurrent neural networks are investigated. They are proven to be useful tools to solve the difficulties of the temporal relationships of inputs between observations at different time steps, by maintaining internal states that have memory. In this paper, a special form of recurrent neural network, the so-called Echo State Network (ESN) is used in which discrete values of time series can be well processed. Then, a model developed based on ESN is compared with the most popular recurrent neural net-works; namely Back Propagation Through Time (BPTT) and Real Time Recurrent Learning (RTRL). The results showed that ESN provides better prediction results compared with BPTT and RTRL. Using ESN, large datasets are learnt in only few minutes or even seconds. It can be concluded that ESN are efficient and valuable tools in binary time series prediction. The results presented in this paper are based on simulated data generated from a simulator representing a person in a 1 bedroom flat
Fuzzy Efficiency Measure with Fuzzy Production Possibility Set
The existing data envelopment analysis (DEA) models for measuring the relative efficiencies of a set of decision making units (DMUs) using various inputs to produce various outputs are limited to crisp data. The notion of fuzziness has been introduced to deal with imprecise data. Fuzzy DEA models are made more powerful for applications. This paper develops the measure of efficiencies in input oriented of DMUs by envelopment form in fuzzy production possibility set (FPPS) with constant return to scale
Structural Topology Optimization: Moving Beyond Linear Elastic Design Objectives
Topology optimization is a systematic, free-form approach to the design of structures. It simultaneously optimizes material quantities and system connectivity, enabling the discovery of new, high-performance structural concepts. While powerful, this design freedom has a tendency to produce solutions that are unrealizable or impractical from a structural engineering perspective. Examples include overly complex topologies that are expensive to construct and ultra-slender subsystems that may be overly susceptible to imperfections. This paper summarizes recent tools developed by the authors capable of mitigating these shortcomings through consideration of (1) constructability, (2) nonlinear mechanics, and (3) uncertainties
An efficient two-parametric family with memory for nonlinear equations
A new two-parametric family of derivative-free iterative methods for solving nonlinear equations is presented. First, a new biparametric family without memory of optimal order four is proposed. The improvement of the convergence rate of this family is obtained by using two self-accelerating parameters. These varying parameters are calculated in each iterative step employing only information from the current and the previous iteration. The corresponding R-order is 7 and the efficiency index 7(1/3) = 1.913. Numerical examples and comparison with some existing derivative-free optimal eighth-order schemes are included to confirm the theoretical results. In addition, the dynamical behavior of the designed method is analyzed and shows the stability of the scheme.The second author wishes to thank the Islamic Azad University, Hamedan Branch, where the paper was written as a part of the research plan, for financial support.Cordero Barbero, A.; Lotfi, T.; Bakhtiari, P.; Torregrosa Sánchez, JR. (2015). An efficient two-parametric family with memory for nonlinear equations. Numerical Algorithms. 68(2):323-335. doi:10.1007/s11075-014-9846-8S323335682Kung, H.T., Traub, J.F.: Optimal order of one-point and multi-point iteration. J. Assoc. Comput. Math. 21, 643–651 (1974)Cordero, A., Hueso, J.L., Martínez, E., Torregrosa, J.R.: A new technique to obtain derivative-free optimal iterative methods for solving nonlinear equation. J. Comput. Appl. Math. 252, 95–102 (2013)Cordero, A., Torregrosa, J.R., Vassileva, M.P.: Pseudocomposition: a technique to design predictor-corrector methods for systems of nonlinear equations. Appl. Math. Comput. 218, 11496–11508 (2012)Džunić, J.: On efficient two-parameter methods for solving nonlinear equations. Numer. Algorithms. 63(3), 549–569 (2013)Džunić, J., Petković, M.S.: On generalized multipoint root-solvers with memory. J. Comput. Appl. Math. 236, 2909–2920 (2012)Petković, M.S., Neta, B., Petković, L.D., Džunić, J. (ed.).: Multipoint methods for solving nonlinear equations. Elsevier (2013)Sharma, J.R., Sharma, R.: A new family of modified Ostrowski’s methods with accelerated eighth order convergence. Numer. Algorithms 54, 445–458 (2010)Soleymani, F., Shateyi, S.: Two optimal eighth-order derivative-free classes of iterative methods. Abstr. Appl. Anal. 2012(318165), 14 (2012). doi: 10.1155/2012/318165Soleymani, F., Sharma, R., Li, X., Tohidi, E.: An optimized derivative-free form of the Potra-Pták methods. Math. Comput. Model. 56, 97–104 (2012)Thukral, R.: Eighth-order iterative methods without derivatives for solving nonlinear equations. ISRN Appl. Math. 2011(693787), 12 (2011). doi: 10.5402/2011/693787Traub, J.F.: Iterative Methods for the Solution of Equations. Prentice Hall, New York (1964)Wang, X., Džunić, J., Zhang, T.: On an efficient family of derivative free three-point methods for solving nonlinear equations. Appl. Math. Comput. 219, 1749–1760 (2012)Zheng, Q., Li, J., Huang, F.: An optimal Steffensen-type family for solving nonlinear equations. Appl. Math. Comput. 217, 9592–9597 (2011)Ortega, J.M., Rheinboldt, W.G. (ed.).: Iterative Solutions of Nonlinear Equations in Several Variables, Ed. Academic Press, New York (1970)Jay, I.O.: A note on Q-order of convergence. BIT Numer. Math. 41, 422–429 (2001)Blanchard, P.: Complex Analytic Dynamics on the Riemann Sphere. Bull. AMS 11(1), 85–141 (1984)Chicharro, F., Cordero, A., Torregrosa, J.R.: Drawing dynamical and parameters planes of iterative families and methods. arXiv: 1307.6705 [math.NA
Performances of PA hollow fiber membrane with the CTA flat sheet membrane for forward osmosis process
© 2013, © 2013 Balaban Desalination Publications. All rights reserved. Abstract: Fertilizer drawn forward osmosis desalination has been earlier explored using flat sheet forward osmosis (FSFO) membrane, which highlighted flux and reverse solute flux (RSF) performance. This study evaluated and compared the performances of a newly developed polyamide (PA)-based hollow fiber forward osmosis (HFFO) membrane and cellulose triacetate FSFO membrane. Both membranes were evaluated for pure water permeability, salt rejection rate (1,000 mg/L NaCl) in RO mode. Physical structure and morphology were further examined using scanning electron micrograph (SEM). SEM images revealed that the overall thickness of the HFFO and FSFO membranes was 152 and 91 μm, respectively. Flux and RSF performances of these two membranes were evaluated using nine fertilizer DS as NH4Cl, KNO3, KCl, (NH4)2SO4, Ca(NO3)2, NH4H2PO4, (NH4)2HPO4, NaNO3, and CO(NH2)2 in active layer–feed solution membrane orientation. HFFO membrane clearly showed better performance for water flux with five DS ((NH4)2SO4, NH4H2PO4, KNO3, CO(NH2)2, and NaNO3) as they showed up to 66% increase in flux. Beside thick PA active layer of HFFO membrane, higher water flux outcome for forward osmosis (FO) process further highlighted the significance of the nature of support layer structure, the thickness and surface chemistry of the active layer of the membrane in the FO process. On the other hand, most DS showed lower RSF with HFFO membrane with the exception of Ca(NO3)2. Most of DS having monovalent cation and anions showed significantly lower RSF with HFFO membrane
Fertilizer-drawn forward osmosis for irrigation of tomatoes
Fertilizer-drawn forward osmosis is a low-energy desalination concept particularly developed for the irrigation use of desalinated water. It has an advantage of not requiring regeneration of the draw solution (DS), thus, it can be used directly for the purpose of irrigation without any additional treatment. The current study was aimed to evaluate the real application of forward osmosis (FO) targeting irrigation of tomato crops based from their fertilizer requirements. Fertilizer-DSs were prepared to drive seawater desalination using commercially available fertilizers such as NH4NO3, NH4Cl, KNO3, KCl, NH4H2PO4, and urea. DSs were prepared to represent varying nitrogen:phosphorous:potassium (N:P:K) ratios used in assorted tomato growth stages. The FO performance evaluated in terms of the flux and reverse solute flux (RSF) showed significant variations in outcome. The resultant flux for different DSs was influenced by the particular fertilizer present in DS mixture and its concentration. This flux varied from 2.50 to 12.49 LMH. Comparatively, DS carrying high osmotic pressure components showed high-flux outcome. The fraction Jw/∆π of these fertilizer-DSs varied from 0.062 to 0.19 LMH/bar, which indicates a changing flux outcome against the same osmotic pressure. To select the best performing fertilizer-DS, nitrogen source fertilizers like urea, NH4NO3, and NH4Cl were further evaluated for 10-0-10 NPK value. It was found that NH4Cl-based DS mixtures performed better than urea- and NH4NO3-based DS. The RSF results indicated that all nitrogen- and potassium-based DS exhibited higher N- and K-RSF. However, the DS using NH4H2PO4 delivered extremely low P-RSF of 12.35 g/m2/h. Long-term run tests with seawater quality feed solution resulted in FO producing a final DS enriched in nutrients greater than the tomato plant’s requirement. This implies that the use of dilution or any other technique to reduce excessive nutrients is essential before using the final DS for tomato irrigation
Thin film composite hollow fibre forward osmosis membrane module for the desalination of brackish groundwater for fertigation
© 2015 Elsevier B.V. The performance of recently developed polyamide thin film composite hollow fibre forward osmosis (HFFO) membrane module was assessed for the desalination of brackish groundwater for fertigation. Four different fertilisers were used as draw solution (DS) with real BGW from the Murray-Darling Basin in Australia. Membrane charge and its electrostatic interactions with ions played a significant role in the performance of the HFFO module using fertiliser as DS. Negatively charged polyamide layer promotes sorption of multivalent cations such as Ca2+ enhancing ion flux and membrane scaling. Inorganic scaling occurred both on active layer and inside the support layer depending on the types of fertiliser DS used resulting in severe flux decline and this study therefore underscores the importance of selecting suitable fertilisers for the fertiliser drawn forward osmosis (FDFO) process. Water flux under active layer DS membrane orientation was about twice as high as the other orientation indicating the need to further optimise the membrane support structure formation. Water flux slightly improved at higher crossflow rates due to enhanced mass transfer on the fibre lumen side. At 45% packing density, HFFO could have three times more membrane area and four times more volumetric flux output for an equivalent 8040 cellulose triacetate flat-sheet FO membrane module
- …