90 research outputs found
Carinae's Dusty Homunculus Nebula from Near-Infrared to Submillimeter Wavelengths: Mass, Composition, and Evidence for Fading Opacity
Infrared observations of the dusty, massive Homunculus Nebula around the
luminous blue variable Carinae are crucial to characterize the mass-loss
history and help constrain the mechanisms leading to the Great Eruption. We
present the 2.4 - 670 m spectral energy distribution, constructed from
legacy ISO observations and new spectroscopy obtained with the {\em{Herschel
Space Observatory}}. Using radiative transfer modeling, we find that the two
best-fit dust models yield compositions which are consistent with CNO-processed
material, with iron, pyroxene and other metal-rich silicates, corundum, and
magnesium-iron sulfide in common. Spherical corundum grains are supported by
the good match to a narrow 20.2 m feature. Our preferred model contains
nitrides AlN and SiN in low abundances. Dust masses range from 0.25 to
0.44 but 45 in both cases due to an
expected high Fe gas-to-dust ratio. The bulk of dust is within a 5
7 central region. An additional compact feature is detected at 390 m.
We obtain = 2.96 10 , a 25\% decline from
an average of mid-IR photometric levels observed in 1971-1977. This indicates a
reduction in circumstellar extinction in conjunction with an increase in visual
brightness, allowing 25-40\% of optical and UV radiation to escape from the
central source. We also present an analysis of CO and CO through lines, showing that the abundances are consistent with
expectations for CNO-processed material. The [C~{\sc{ii}}] line is
detected in absorption, which we suspect originates in foreground material at
very low excitation temperatures.Comment: Accepted in Ap
Herschel SPIRE Fourier Transform Spectrometer: Calibration of its Bright-source Mode
The Fourier Transform Spectrometer (FTS) of the Spectral and Photometric
Imaging REceiver (SPIRE) on board the ESA Herschel Space Observatory has two
detector setting modes: (a) a nominal mode, which is optimized for observing
moderately bright to faint astronomical targets, and (b) a bright-source mode
recommended for sources significantly brighter than 500 Jy, within the SPIRE
FTS bandwidth of 446.7-1544 GHz (or 194-671 microns in wavelength), which
employs a reduced detector responsivity and out-of-phase analog signal
amplifier/demodulator. We address in detail the calibration issues unique to
the bright-source mode, describe the integration of the bright-mode data
processing into the existing pipeline for the nominal mode, and show that the
flux calibration accuracy of the bright-source mode is generally within 2% of
that of the nominal mode, and that the bright-source mode is 3 to 4 times less
sensitive than the nominal mode.Comment: 15 pages, 16 figures, accepted for publication in Experimental
Astronom
Far-IR Excited OH Lines from Orion KL Outflows
Accepted in ApJ letters, 2006 March 2As part of the first far-IR line survey towards Orion KL, we present the detection of seven new rotationally excited OH Lambda-doublets (at 48, 65, 71, 79, 98 and 115 um). Observations were performed with the Long Wavelength Spectrometer (LWS) Fabry-Perots on board the Infrared Space Observatory (ISO). In total, more than 20 resolved OH rotational lines, with upper energy levels up to 620 K, have been detected at an angular and velocity resolutions of 80$'' and 33 km s^-1 respectively. OH line profiles show a complex behavior evolving from pure absorption, P-Cygni type to pure emission. We also present a large scale 6' declination raster in the OH ^2\Pi_3/2 J=5/2^+-3/2^- and ^2\Pi_3/2 J=7/2^-5/2^+ lines (at 119.441 and 84.597 um) revealing the decrease of excitation outside the core of the cloud. From the observed profiles, mean intrinsic line widths and velocity offsets between emission and absorption line peaks we conclude that most of the excited OH arises from Orion outflow(s), i.e. the ``plateau'' component. We determine an averaged OH abundance relative to H_2 of X(OH)=(0.5-1.0)x10^-6, a kinetic temperature of 100 K and a density of n(H_2)=5x10^5 cm^-3. Even with these conditions, the OH excitation is heavily coupled with the strong dust continuum emission from the inner hot core regions and from the expanding flow itself.Peer reviewe
The Water Vapor Abundance in Orion KL Outflows
We present the detection and modeling of more than 70 far-IR pure rotational
lines of water vapor, including the 18O and 17O isotopologues, towards Orion
KL. Observations were performed with the Long Wavelength Spectrometer
Fabry-Perot (LWS/FP; R~6800-9700) on board the Infrared Space Observatory (ISO)
between ~43 and ~197 um. The water line profiles evolve from P-Cygni type
profiles (even for the H2O18 lines) to pure emission at wavelengths above ~100
um. We find that most of the water emission/absorption arises from an extended
flow of gas expanding at 25+-5 kms^-1. Non-local radiative transfer models show
that much of the water excitation and line profile formation is driven by the
dust continuum emission. The derived beam averaged water abundance is
2-3x10^-5. The inferred gas temperature Tk=80-100 K suggests that: (i) water
could have been formed in the "plateau" by gas phase neutral-neutral reactions
with activation barriers if the gas was previously heated (e.g. by shocks) to
>500 K and/or (ii) H2O formation in the outflow is dominated by in-situ
evaporation of grain water-ice mantles and/or (iii) H2O was formed in the
innermost and warmer regions (e.g. the hot core) and was swept up in ~1000 yr,
the dynamical timescale of the outflow.Comment: Accepted for publication in ApJ letters [2006 August 7] (5 pages 2,
figures, not edited
Carinae's Dusty Homunculus Nebula from Near-Infrared to Submillimeter Wavelengths: Mass, Composition, and Evidence for Fading Opacity
Infrared observations of the dusty, massive Homunculus Nebula around the luminous blue variable Carinae are crucial to characterize the mass-loss history and help constrain the mechanisms leading to the great eruption. We present the 2.4-670 m spectral energy distribution, constructed from legacy Infrared Space Observatory observations and new spectroscopy obtained with the Herschel Space Observatory. Using radiative transfer modeling, we find that the two best-fit dust models yield compositions that are consistent with CNO-processed material, with iron, pyroxene and other metal-rich silicates, corundum, and magnesium-iron sulfide in common. Spherical corundum grains are supported by the good match to a narrow 20.2 m feature. Our preferred model contains nitrides AlN and Si3N4 in low abundances. Dust masses range from 0.25 to 0.44 M, but M(sub tot) 45 M in both cases, due to an expected high Fe gas-to-dust ratio. The bulk of dust is within a 5" x 7" central region. An additional compact feature is detected at 390 m. We obtain L = 2.96 x 10(exp 6) Lunar mass, a 25% decline from an average of mid-IR photometric levels observed in 1971-1977. This indicates a reduction in circumstellar extinction in conjunction with an increase in visual brightness, allowing 25%-40% of optical and UV radiation to escape from the central source. We also present an analysis of 12CO and 13CO J = 5-4 through 9-8 lines, showing that the abundances are consistent with expectations for CNO-processed material. The [12CII] line is detected in absorption, which we suspect originates in foreground material at very low excitation temperatures
Observing Extended Sources with the \Herschel SPIRE Fourier Transform Spectrometer
The Spectral and Photometric Imaging Receiver (SPIRE) on the European Space
Agency's Herschel Space Observatory utilizes a pioneering design for its
imaging spectrometer in the form of a Fourier Transform Spectrometer (FTS). The
standard FTS data reduction and calibration schemes are aimed at objects with
either a spatial extent much larger than the beam size or a source that can be
approximated as a point source within the beam. However, when sources are of
intermediate spatial extent, neither of these calibrations schemes is
appropriate and both the spatial response of the instrument and the source's
light profile must be taken into account and the coupling between them
explicitly derived. To that end, we derive the necessary corrections using an
observed spectrum of a fully extended source with the beam profile and the
source's light profile taken into account. We apply the derived correction to
several observations of planets and compare the corrected spectra with their
spectral models to study the beam coupling efficiency of the instrument in the
case of partially extended sources. We find that we can apply these correction
factors for sources with angular sizes up to \theta_{D} ~ 17". We demonstrate
how the angular size of an extended source can be estimated using the
difference between the sub-spectra observed at the overlap bandwidth of the two
frequency channels in the spectrometer, at 959<\nu<989 GHz. Using this
technique on an observation of Saturn, we estimate a size of 17.2", which is 3%
larger than its true size on the day of observation. Finally, we show the
results of the correction applied on observations of a nearby galaxy, M82, and
the compact core of a Galactic molecular cloud, Sgr B2.Comment: Accepted for publication by A&
Exoplanet atmospheres Characterization Observatory payload short-wave infrared channel: EChO SWiR
EChO (Exoplanet atmospheres Characterization Observatory), a proposal for exoplanets exploration space mission, is considered the next step for planetary atmospheres characterization. It would be a dedicated observatory to uncover a large selected sample of planets spanning a wide range of masses (from gas giants to super-Earths) and orbital temperatures (from hot to habitable). All targets move around stars of spectral types F, G, K, and M. EChO would provide an unprecedented view of the atmospheres of planets in the solar neighbourhood. The consortium formed by various institutions of different countries proposed as ESA M3 an integrated spectrometer payload for EChO covering the wavelength interval 0.4 to 16 µm. This instrument is subdivided into 4 channels: a visible channel, which includes a fine guidance system (FGS) and a VIS spectrometer, a near infrared channel (SWiR), a middle infrared channel (MWiR), and a long wave infrared module (LWiR). In addition, it contains a common set of optics spectrally dividing the wavelength coverage and injecting the combined light of parent stars and their exoplanets into the different channels. The proposed payload meets all of the key performance requirements detailed in the ESA call for proposals as well as all scientific goals. EChO payload is based on different spectrometers covering the spectral range mentioned above. Among them, SWiR spectrometer would work from 2.45 microns to 5.45 microns. In this paper, the optical and mechanical designs of the SWiR channel instrument are reported on
Noise performance of the Herschel-SPIRE bolometers during instrument ground tests
The flight model of the SPIRE instrument underwent several test campaigns in a test facility at the Rutherford Appleton Laboratory (RAL) in the UK. A final dark campaign, completed in March 2007, provided an environment virtually free from optical radiation. This allowed re-determining the fundamental model parameters of the NTD spider web bolometer detector arrays in the new environment. The tests reported in this paper produced a fairly homogeneous dataset to investigate white noise and 1/f noise at different bias voltages, bias frequencies, and bath temperatures. We find that the white noise performance is in excellent agreement with the model predictions, once we correct the low frequency signal variations that are due to temperature fluctuations of the thermal bath at about 300 mK. The temperature of the thermal bath (detector array base plate) is measured by thermistor pixels that are part of the bolometer arrays. A residual 1/f component beyond those variations is hardly detected. This unexpected stability is very welcome and will positively impact photometer scan maps, the most popular observing mode of SPIRE
In-orbit performance of the Herschel/SPIRE imaging Fourier transform spectrometer: lessons learned
The Spectral and Photometric Imaging Receiver (SPIRE) is one of three scientific instruments on board the European Space Agency's Herschel Space Observatory which ended its operational phase on 29 April 2013. The low to medium resolution spectroscopic capability of SPIRE is provided by an imaging Fourier transform spectrometer (iFTS) of the Mach-Zehnder configuration. With their high throughput, broad spectral coverage, and variable resolution, coupled with their well-defined instrumental line shape and intrinsic wavelength and intensity calibration, iFTS are becoming increasingly common in far-infrared space astronomy missions. The performance of the SPIRE imaging spectrometer will be reviewed and example results presented. The lessons learned from the measured performance of the spectrometer as they apply to future missions will be discussed
The data processing pipeline for the Herschel/SPIRE imaging Fourier Transform Spectrometer
We present the data processing pipeline to generate calibrated data products from the Spectral and Photometric Imaging Receiver (SPIRE) imaging Fourier Transform Spectrometer. The pipeline processes telemetry from SPIRE point source, jiggle- and raster-map observations, producing calibrated spectra in low-, medium-, high-, and mixed low- and highresolution modes. The spectrometer pipeline shares some elements with the SPIRE photometer pipeline, including the conversion of telemetry packets into data timelines and the calculation of bolometer voltages from the raw telemetry. We present the following fundamental processing steps unique to the spectrometer: temporal and spatial interpolation of the stage mechanism and detector data to create interferograms; apodization; Fourier transform, and creation of a hyperspectral data cube. We also describe the corrections for various instrumental effects including first- and secondlevel glitch identification and removal, correction of the effects due to the Herschel primary mirror and the spectrometer calibrator, interferogram baseline correction, channel fringe correction, temporal and spatial phase correction, non-linear response of the bolometers, variation of instrument performance across the focal plane arrays, and variation of spectral efficiency. Astronomical calibration is based on combinations of observations of standard astronomical sources and regions of space known to contain minimal emission
- …