6,227 research outputs found
Review of antiskid and brake dynamics research
The behavior of various antiskid systems was investigated under controlled conditions. Results from utilizing a single main wheel of a DC-9 aircraft suggest that the systems investigated perform well under most circumstances but there may be room for improvement. For example, it was demonstrated that pressure bias modulation can adversely affect the response of antiskid systems to rapid changes in the runway friction level. Results also indicate that antiskid systems designed to operate at a slip ratio of approximately 0.1 can provide a maximum braking effort without undue loss in the cornering capability of the tire. Time histories of braking friction coefficient were shown to provide a means of determining antiskid system performance and for systems that employed pressure bias modulation it was shown that performance could also be estimated from time histories of brake pressure and torque
Fabrication of cooled, graphite-lined structures
Improved method of fabricating cooled graphite-lined thrust chamber has been developed. Layer of nickel is electrodeposited onto outer surface of machined and contoured graphite liner. Coolant passages are machined into nickel layer, filled with wax, outer shell electroformed over this, and wax removed. Tests in flox/methane rocket engine were completely successful
Status of recent aircraft braking and cornering research
The sources of degraded performance which sometimes occurs under adverse runway conditions, are investigated to obtain data necessary to the development of more advanced systems, in an effort to insure safe ground handling operations under all-weather conditions. Tire-to-ground friction characteristics are determined under braking conditions which closely resemble those of airplanes under heavy braking. Braking data from single-wheel landing loads track tests are related with those available from full-scale flight tests
Behavior of aircraft antiskid breaking systems on dry and wet runway surfaces: A slip-ratio-controlled system with ground speed reference from unbraked nose wheel
An experimental investigation was conducted at the Langley aircraft landing loads and traction facility to study the braking and cornering response of a slip ratio controlled aircraft antiskid braking system with ground speed reference derived from an unbraked nose wheel. The investigation, conducted on dry and wet runway surfaces, utilized one main gear wheel, brake, and tire assembly of a DC-9 series 10 airplane. During maximum braking, the average ratio of the drag force friction coefficient developed by the antiskid system to the maximum drag force friction coefficient available was higher on the dry surface than on damp and flooded surfaces, and was reduced with lighter vertical loads, higher yaw angles, and when new tire treads were replaced by worn treads. Similarly, the average ratio of side force friction coefficient developed by the tire under antiskid control to the maximum side force friction coefficient available to a freely rolling yawed tire decreased with increasing yaw angle, generally increased with ground speed, and decreased when tires with new treads were replaced by those with worn treads
Technique for measuring side forces on a banked aircraft with a free-swiveling nose gear
An experimental investigation was conducted at the Langley Research Center to determine a method for towing an aircraft to measure the side forces of a free-swiveling nose gear due to variations in bank angle. A F-106 aircraft and the Space Shuttle orbiter OV-101 were towed to measure side forces on full-size aircraft for bank angles up to 3 deg. These tests indicate that substantial side forces will occur if an aircraft is rolling on a runway in a banked attitude even when the nose gear is free to swivel. Corotation of a twin-tire nose gear appears to cause a substantial increase in side force due to bank angle compared with a nose gear with indepdendently rotating wheels
Service evaluation of weight outcomes as a function of initial BMI in 34,271 adults referred to a primary care/commercial weight management partnership scheme
Peer reviewedPublisher PD
Weight outcomes audit for 34,271 adults referred to a primary care/commercial weight management partnership scheme
Copyright © 2011 S. Karger AG, Basel.Peer reviewedPublisher PD
Intrinsic, Future-oriented Goal Awareness and Two-year College Graduation
The two-year college graduation rate is at an all-time low. Curricular and program designs are not making the sweeping changes needed for the outcomes desired. While higher education continues to be sold as an economic good, research is pointing to the predictive nature of intrinsic, future-oriented goal (IFOG) awareness on sub-goal adoption and its relation to course success and intention to persist. This cross-sectional, correlational study desired to uncover the relation between IFOG and graduation. A modified version of the Aspirations index was provided to a group of new students and those on-target to graduate (last semester) in an effort to understand the variable relations and variable value difference, if any, between groups.
Despite previous studies, on-target to graduate students did not have a higher presence of IFOG than new students (was not predictive), and, while not statistically significant, new students did have a higher presence of IFOG than those on-target to graduate. Also, diploma (1 year) students did have a statistically significant higher presence of IFOG than degree students. Results are discussed within Boleman and Deal’s (1999) meaning making framework. Implications for higher education leaders and recommendations for future research and design are discussed given the promise of prior research, the findings of this research, and the ongoing challenge of increasing two-year college graduation
- …