5,175 research outputs found
Extension and validation of a method for locating damaged members in large space trusses
The damage location approach employs the control system capabilities for the structure to test the structure and measure the dynamic response. The measurements are then used in a system identification algorithm to produce a model of the damaged structure. The model is compared to one for the undamaged structure to find regions of reduced stiffness which indicate the location of damage. Kabe's 3,4 stiffness matrix adjustment method was the central identification algorithm. The strength of his method is that, with minimal data, it preserves the representation of the physical connectivity of the structure in the resulting model of the damaged truss. However, extensive storage and computational effort were required as a result. Extension of the damage location method to overcome these problems is the first part of the current work. The central system identification algorithm is replaced with the MSMT method of stiffness matrix adjustment which was previously derived by generalizing an optimal-update secant method form quasi-Newton approaches for nonlinear optimization. Validation of the extended damage location method is the second goal
Expansion and orthogonalization of measured modes for structure identification
The purpose was to investigate a new simultaneous expansion/orthogonalization method in comparison with two previously published expansion methods and a widely used orthogonalization technique. Each expansion method uses data from an analytical model of the structure to complete the estimate of the mode shape vectors. Berman and Nagy used Guyan expansion in their work with improving analytical models. In this method, modes are expanded one at a time, producing a set not orthogonal with respect to the mass matrix. Baruch and Bar Itzhack's optimal orthogonalization procedure was used to subsequently adjust the expanded modes. A second expansion technique was presented by O'Callahan, Avitabile, and Reimer and separately by Kammer. Again, modes are expanded individually and orthogonalized after expansion with the same optimal technique as above. Finally, a simultaneous expansion/orthogonalization method was developed from the orthogonal Procrustes problem of computational mathematics. In this method modes are optimally expanded as a set and orthogonal with respect to the mass matrix as a result. Two demonstation problems were selected for the comparison of the methods described. The first problem is an 8 degree of freedom spring-mass problem first presented by Kabe. Several conditions were examined for expansion method including the presence of errors in the measured data and in the analysis models. As a second demonstration problem, data from tests of laboratory scale model truss structures was expanded for system identification. Tests with a complete structure produced a correlated analysis model and the stiffness and mass matrices. Tests of various damaged configurations produced measured data for 6 modes at 14 dof locations
Interstellar Gas in Low Mass Virgo Cluster Spiral Galaxies
We have measured the strengths of the [C II] 158 micron, [N II] 122 micron,
and CO (1 - 0) lines from five low blue luminosity spiral galaxies in the Virgo
Cluster, using the Infrared Space Observatory and the NRAO 12m millimeter
telescope. Two of the five galaxies have high L([C II)]/L(CO) and L(FIR)/L(CO)
ratios compared to higher mass spirals. These two galaxies, NGC 4294 and NGC
4299, have L([C II])/L(CO) ratios of >14,300 and 15,600, respectively, which
are similar to values found in dwarf irregular galaxies. This is the first time
that such enhanced L([C II])/L(CO) ratios have been found in spiral galaxies.
This result may be due to low abundances of dust and heavy elements, which can
cause the CO (1 - 0) measurements to underestimate the molecular gas content.
Another possibility is that radiation from diffuse HI clouds may dominate the
[C II] emission from these galaxies. Less than a third of the observed [C II]
emission arises from HII regions.Comment: 24 pages, Latex, 2 Figures, 6 Tables To appear in the Astronomical
Journal, July 199
Simulation on sensory impairment in older adults:nursing education
Sensory impairments are identified as the most common chronic and disabling conditions of later life impacting significantly on the quality of life and safety of older adults. Hospitals and care environments can present significant challenges to older adults with sensory impairments to negotiate. Therefore, it is important to raise awareness on sensory and cognitive impairments with all healthcare professionals and nurses in particular, both to help develop an empathetic awareness on the impact of impairment and to minimize risk of adverse events. This article reports on a pedagogical innovation on the development and use of a simulation resource primarily on sensory impairments in older adults with first year nursing students within an undergraduate nursing programme in a Scottish university. The article also reports on students' reflections on their experience of participating in this simulation
Model correlation and damage location for large space truss structures: Secant method development and evaluation
On-orbit testing of a large space structure will be required to complete the certification of any mathematical model for the structure dynamic response. The process of establishing a mathematical model that matches measured structure response is referred to as model correlation. Most model correlation approaches have an identification technique to determine structural characteristics from the measurements of the structure response. This problem is approached with one particular class of identification techniques - matrix adjustment methods - which use measured data to produce an optimal update of the structure property matrix, often the stiffness matrix. New methods were developed for identification to handle problems of the size and complexity expected for large space structures. Further development and refinement of these secant-method identification algorithms were undertaken. Also, evaluation of these techniques is an approach for model correlation and damage location was initiated
A comparison of refined models for flexible subassemblies
Interactions between structure response and control of large flexible space systems have challenged current modeling techniques and have prompted development of new techniques for model improvement. Due to the geometric complexity of envisioned large flexible space structures, finite element models (FEM's) will be used to predict the dynamic characteristics of structural components. It is widely accepted that these models must be experimentally 'validated' before their acceptance as the basis for final design analysis. However, predictions of modal properties (natural frequencies, mode shapes, and damping ratios) are often in error when compared to those obtained from Experimental Modal Analysis (EMA). Recent research efforts have resulted in the development of algorithmic approaches for model improvement, also referred to as system or structure identification
Developing and Implementing Self-Direction Programs and Policies: A Handbook
Provides a guide to designing, implementing, and evaluating service delivery models that allow public program participants to manage their own care services and supports. Outlines elements of employer and budget authorities, enrollment, and counseling
Organizational Forms for Community Collaboration to Confront Homelessness
Homelessness is a complex social problem that touches many different sectors of a community--not only housing, but also healthcare, education, criminal justice, workforce, and more. Because of these complex interrelationships, homelessness as a social problem lends itself to collaborative governance where service providers across sectors come together to address the problem. This research examines homeless service provision as an example of how local government, nonprofit organizations, community funders, and other stakeholders collaborate and what knits those networks together. This research project encompasses three major efforts: a comparative case study of six different communities and how they have organized to confront homelessness, a quantitative analysis of data on organizational structure and performance outcomes from 397 collaborative networks across the United States set up to address homelessness in their communities, and an in-depth case study of a single community, including how stakeholders and consumers of services perceive and navigate collaborative governance and provider networks. The results suggest that whether and how collaboration emerges depends deeply on local context and the local political culture. Further collaboration and its success depend on establishing local norms that collaboration is the way business will be done. Collaboration also tends to turn inward, even when its intent is to be broad and inclusive: parties focus on establishing shared objectives, building trust and relationships among members, and aligning funding flows with the goals of the collaborative. Evidently, the things that make collaboration work are also the things that tend to make it less democratic. That is, collaboration appears to work best when the group embraces a shared vision and goals—but that might come at the expense of minority voices. Also, collaboration appears to work best when horizontal relationships among members are strong, but this could also create insider relationships that trade off with outsider engagement. Importantly, collaboratives appear to have at least a partial corrective: measurement, accountability, and transparency. At their best, these collaboratives combine a professional focus on measurement, performance tracking, and improvement with a public commitment to openness and transparency
Wireless colorimetric readout to enable resource-limited point-of-care
Patientennahe Diagnostik in Entwicklungsländer birgt spezielle Herausforderungen, die ihren Erfolg bisher begrenzen. Diese Arbeit widmet sich daher der Entwicklung eines in seiner Herstellung skalierbaren und vielseitig einsetzbaren funkbasierten Auslesegerätes für Laborteststreifen. Durch die Kombination einer wachsenden Auswahl an papierbasierten Teststreifendiagnostiken mit gedruckter Elektronik und unter Berücksichtigung des diagnostischen Alltags im südlichen Afrika wurde ein Gerät entwickelt, das Teststreifen zuverlässig ausliest und die Daten per Funk an eine Datenbank übertragen kann.
Die Technik basiert auf RFID-Tags (radio frequency identification devices), welche auf verschiedene flexible Substrate gedruckt wurden, um die technische Umsetzbarkeit und Funktionalität zu evaluieren. Um den Preis für die geplante Anwendung niedrig zu halten, wurden unter anderem Papier und Karton als Substrate genutzt. Das Ergebnis dieser Studie sind passive RFID-Tags auf unterschiedlichen, meist günstigen Substraten, die über eine Distanz von über 75 mm betrieben und ausgelesen werden können.
Basierend auf der über RFID bereitgestellten Energie und Datenübertragung wurde eine Ausleseeinheit für Standardpapierstreifentests entwickelt und integriert. Durch das Auslesen verschiedener Teststreifen wurde das Gerät evaluiert und in seiner Aussagekraft mit einer scanner-basierten Aufnahme und anschließender Bildanalyse (ImageJ), einem kommerziellen Auslesegerät sowie einer manuellen Auslesung mit Hilfe von Farbtabellen verglichen. Das Gerät kann die Streifen zuverlässig auslesen und die Daten über die RFID-Schnittstelle übertragen. Die funkbasierte Ausleseeinheit ist mit verschiedenen kommerziellen Teststreifen sowohl im biodiagnostischen (lateral flow tests) wie auch im chemischen Bereich (pH-Wert) kompatibel. Die modulare Lösung erlaubt ein breites Einsatzgebiet und führt dadurch zu reduzierten Trainingszeiten der Anwender und einer zuverlässigen Handhabung.
Die vorgestellte Lösung ist äußerst kostengünstig und bedarf keiner Wartung, wodurch sie sich sehr gut für den Einsatz in abgelegenen Feldkrankenhäusern eignet. Es wurde ein skalierbarer Prototyp entwickelt, der auf konventionellen Herstellungsverfahren der Verpackungsindustrie aufbaut. Aktuell handelt es sich noch um einen bogenbasierten Prozess, der sich aber prinzipiell auch auf Rolle-zu-Rolle Maschinen übertragen lässt. Bei der Entwicklung des Geräts spielte die Möglichkeit der lokalen Herstellung in den Einsatzländern eine große Rolle. Diese hätte neben der Generierung von Arbeitsplätzen auch den Vorteil einer einfacheren Verteilung der Geräte in ländliche Regionen, in denen sie den größten Nutzen für die Diagnostik erzielen würden
- …