Mediastinal mass diagnosed as a benign schwannoma

Neurogenic tumours of the mediastinum are most commonly present in the posterior mediastinal compartment. Schwannomas, being the most frequently encountered type, can be either benign or malignant, although the former is more common. They typically appear as an asymptomatic mass on radiographic imaging. These tumours with spindle-shaped cells are often asymptomatic, and are routinely detected on standard pulmonary radiography. However, computed tomography and magnetic resonance imaging, especially for posterior mediastinal tumours, provide additional information and help to determine its possible extension to adjacent structures. Therefore, radiographic and histopathological examinations are vital diagnostic tools in the detection of these silent tumours. Complete surgical resection using video-assisted thoracic surgical technique is the mainstay of treatment, and offers an excellent prognosis

The association between bullying‐victimisation and sleep disturbances in adolescence: Evidence from a twin study

Bullying‐victimisation has been associated with sleep disturbances. This study investigated the degree to which subtypes of bullying‐victimisation in adolescence are linked with sleep disturbances. Genetic and environmental contributions underlying bullying‐victimisation and sleep disturbances were investigated. Participants (3,242–5,076 pairs) from a longitudinal community twin study reported on their bullying‐victimisation at the age of 14 years, and sleep quality and insomnia symptoms at age 16. Regression analyses were used, accounting for the role of individual and family factors. Structural equation twin model fitting was conducted. Bullying‐victimisation was modestly associated with sleep quality and insomnia symptoms (r = 0.22–0.23) and a similar strength of associations was found across bullying‐victimisation subtypes (r = 0.11–0.22). Bullying‐victimisation, sleep quality and insomnia symptoms were predominantly influenced by genes (25–59%) and non‐shared environments (40–62%). The association between bullying‐victimisation and sleep quality was explained by genetic and non‐shared environmental influences. For insomnia symptoms and sleep quality, the association with bullying‐victimisation was in part explained by a genetic overlap. Associations between bullying‐victimisation and sleep disturbances are not limited to specific aspects of bullying‐victimisation but appear to exist for all subtypes. These findings stimulate research questions regarding the mechanisms underlying these links. For example, could certain heritable traits, such as temperament, increase vulnerability to experiencing sleep disturbances and being bullied? Research on bullying and sleep should aim to take the role of genetic predisposition into account, while also noting that it is not the only causal influence. Understanding more about these pathways could strengthen the development of techniques to prevent these difficulties from occurring

Screening of systemic fungicides and biochemicals against seed borne mycoflora associated with Momordica charantia

Study of seed borne fungi associated with bitter gourd seeds were conducted under in vitro condition in Department of Plant Pathology, Bahauddin Zakariya University, Multan, Pakistan. Two hundred (200) seed samples of Momordica charantia (bitter gourd) were collected from southern regions of Punjab province (Multan, Khanewal and Bahawalpur). Six fungal species were isolated out of which Aspergillus flavus showed highest percentage that is, 27.3% followed by Rhizopus stolonifer 17.98%, Alternaria alternata 13.34%, Aspergillus niger 5.23%, Myrothecium roridum 7.37% and Fusarium solani 6.69%. More number of fungi was observed by using blotter paper technique when compared with agar plate method. Of the three systemic fungicides used include ridomil gold MZ, bavistin, and score; and two low cost chemicals such as salicylic acid and boric acid. Ridomil gold MZ gave good results at all concentrations (20, 30 and 40 mg/10 ml) against all the isolated fungi compared with other fungicides. Salicyclic acid gave the best results against isolated fungi compared to boric acid.Key words: Myrothecium roridum, bitter gourd, salicyclic acid, southern Punjab, bavistin, Pakistan

Innovative Tin and hard carbon architecture for enhanced stability in lithium-ion battery anodes

\ua9 2024Tin (Sn), with a theoretical capacity of 994 mAh g-1, is a promising anode material for lithium-ion batteries (LIBs). However, fundamental limitations like large volume expansion during charge-discharge cycle and confined electronic conductivity limit its practical utility. Here, we report a new material design and manufacturing method of LIB anodes using Sn and Hard Carbon (HC) architecture, which is produced by Physical Vapor Deposition (PVD). A bilayer HC/Sn anode structure is deposited on a carbon/copper sheet as a function of deposition time, temperature, and substrate heat treatment. The developed anodes are used to make cells with a lithium-ion electrolyte using a specific fabrication process. The morphology, atomic structure, conductivity, and electrochemical performance of the developed HC/Sn anodes are studied with SEM, TEM, XPS, and electrochemical techniques. At a discharge rate of 0.1C, the Snheated + HC anode performs exceptionally well, offering a capacity of 763 mAh g-1. It is noteworthy that it achieves a capacity of 342 mAh g-1 when fast charging at 5C, demonstrating exceptional rate capability. The Snheated + HC anode maintains >97 % Coulombic efficiency of its capacity after 3000 cycles at a rate of 0.1C after 3000 cycles 730.5 mAh g-1 recorded, demonstrating an impressive cycle life. The novel material design approach of the Snheated + HC anode, which has a multi-layered structure and HC acting as a barrier against volumetric expansion and improving electronic conductivity during battery cycling, is perceived as influential in uplifting anode\u27s performance

Hydrogen induced optically-active defects in silicon photonic nanocavities

This work was supported by Era-NET NanoSci LECSIN project coordinated by F. Priolo, by the Italian Ministry of University and Research, FIRB contract No. RBAP06L4S5 and by the EPSRC UKSp project. Partial financial support by the Norwegian Research Council is also acknowledged.We demonstrate intense room temperature photoluminescence (PL) from optically active hydrogen- related defects incorporated into crystalline silicon. Hydrogen was incorporated into the device layer of a silicon on insulator (SOI) wafer by two methods: hydrogen plasma treatment and ion implantation. The room temperature PL spectra show two broad PL bands centered at 1300 and 1500 nm wavelengths: the first one relates to implanted defects while the other band mainly relates to the plasma treatment. Structural characterization reveals the presence of nanometric platelets and bubbles and we attribute different features of the emission spectrum to the presence of these different kind of defects. The emission is further enhanced by introducing defects into photonic crystal (PhC) nanocavities. Transmission electron microscopy analyses revealed that the isotropicity of plasma treatment causes the formation of a higher defects density around the whole cavity compared to the ion implantation technique, while ion implantation creates a lower density of defects embedded in the Si layer, resulting in a higher PL enhancement. These results further increase the understanding of the nature of optically active hydrogen defects and their relation with the observed photoluminescence, which will ultimately lead to the development of intense and tunable crystalline silicon light sources at room temperature.Publisher PDFPeer reviewe

Hydrodynamics, Mass and Heat Transferin Reactive Distillation

The ethyl acetate synthesis via heterogeneous reactive distillation is studied experimentally using ethanol and acetic acid. Three types of cation exchanging resins were used as catalysts: Zerolit 225, Zerolit 226 and Ambylite 400. Experiments were carried out in two units of the same dimensions. Each unit consisted of three sections: rectifying, reactive and stripping sections of heights (60+25+20) cm respectively and 2.5cm column diameter. The first unit (column-A-) was a fractionation type and the second unit (column-B-) was packed column. The packing type was hollow glass cylinders with 10 mm height, and 4, 5 mm inner and outer diameter respectively. <br /> The experiments were carried out by using two operation modes. The semi-batch and continuous operation mode. In the first part of present investigation, the semi-batch mode was used to evaluate the catalyst type and to evaluate the performance of reactive distillation unit configuration (Fractionation and packed column). Results show that, the column-B- gave higher conversion rates than column-A-. This is attributed to the high surface area available for liquid vapour contact in packed type column, which leads to increasing mass transfer rates. On the other hand, Ambylite 400 catalyst showed higher activity for esterification reaction than other two types of catalysts. <br /> The second part of work continued with column -B- only. It is well known that, the esterification process is regarded one of exothermic reactions. Therefore, the monitoring of the temperature distribution along column axial for all three types of catalysts showed that the temperature distribution was essentially the same due to steady state operation in continuous operation mode. On the other hand, the effect of reflux ratio on temperature distribution was clearly noted, that is as the reflux ratio increased the temperature distribution along the column was reduced for each type of catalysts.<br /> On the other hand, the experimental results point that, as a reflux ratio increases the conversion rates of acetic acid is increased too because such increasing is related to high mass transfer rates between vapour and liquid along reactive distillation column. <br /

Perinatal risk factors and subclinical hypomania: A prospective community study.

BACKGROUND: Perinatal risk factors are implicated in the development of psychopathology, but their role in bipolar disorder (BD) and hypomania is unclear. Using data from a prospective community cohort, this is the first study to investigate the association between a range of perinatal risk factors, hypomanic symptoms, and 'high-risk' for BD in the general population. METHODS: Parent report of perinatal events were available for 26,040 eighteen-month-olds from the Twins Early Development Study. Subsequent self-report hypomania was measured at ages 16 (Hypomania Checklist-16; N = 2943) and 26 (Mood Disorders Questionnaire; N = 7748). Participants were categorised as 'high-risk' for BD using established classifications. Linear and logistic regressions were conducted within a generalised estimating equations framework to account for relatedness in the sample. RESULTS: Prenatal alcohol exposure (β = 0.08, SE = 0.04, p = .0002) and number of alcohol units consumed (β = 0.09, SE = 0.02, p < .0001) were associated with hypomanic symptoms at age 16, and number of alcohol units (OR = 1.13, 95 % CI:1.06-1.21, p = .0003) and maternal stress (OR = 1.68, 95 % CI:1.21-2.34, p = .002) were associated with 'high-risk' for BD age 16. Prenatal tobacco exposure (β = 0.10, SE = 0.04, p < .0001) and number of cigarettes smoked (β = 0.10, SE = 0.01, p < .0001) were associated with hypomanic symptoms and 'high-risk' for BD at age 26, although these result were attenuated controlling for parental psychiatric history. LIMITATIONS: Familial confounding could not be fully adjusted for. Rater reports include some biases. CONCLUSIONS: These findings show perinatal risk factors to be associated with subclinical hypomania and 'high-risk' for BD. Future work should explore the mechanisms underlying these longitudinal associations, which could shed light on prevention and intervention efforts

Designing Molybdenum Trioxide and Hard Carbon Architecture for Stable Lithium-Ion Battery Anodes

\ua9 2024 The Author(s). Advanced Materials Interfaces published by Wiley-VCH GmbH. Molybdenum Trioxide (MoO3) is a promising candidate as an anode material for lithium-ion batteries (LIB), with a theoretical capacity of 1 117 mAhg−1. Nevertheless, MoO3 has inherent lower electronic conductivity and suffers from significant volume expansion during the charge–discharge cycle, which hinders its ability to attain a substantial capacity and cyclability for practical applications. In this study, a novel material design strategy is reported for LIB anodes containing MoO3 and hard carbon (HC) architecture fabricated using a Physical Vapor Deposition (PVD) technique. MoO3/HC as anode materials are evaluated for LIBs, which demonstrate an exceptional performance with a capacity of 953 mAhg−1 at a discharging rate of 0.2 C. Additionally, MoO3/HC anode demonstrated exceptional rate capability during fast charging at 5 C and achieved a capacity of 342 mAhg−1. The MoO3/HC anode demonstrates remarkable cycle life, retaining over &gt; 99% Coulombic efficiency after 3 000 cycles at a rate of 0.2 C. The exceptional performance of MoO3/HC anode can be attributed to the novel material design strategy based on a multi-layered structure where HC provides a barrier against the possible volumetric expansion of LIB anode

Outcomes of outpatient parenteral antimicrobial therapy (OPAT) for urinary tract infections – A single center retrospective cohort study

Background: Outpatient parenteral antimicrobial therapy (OPAT) is widely used to safely administer intravenous antibiotics in the outpatient setting. However, there are risks of treatment failure and clinical complications. We evaluate the outcomes of episodes of urinary tract infection (UTI) treated through OPAT at a large tertiary referral center in the UK. Methods: We retrospectively reviewed patient records of episodes of UTI treated for ≥ 2 days at the Sheffield Teaching Hospitals OPAT unit from 2017 to 2021. We defined OPAT and infection failure as unplanned 30-day hospital readmissions and symptomatic non-improvement, respectively. Univariate and multivariate logistic regression analyses were performed to analyze predictors of these outcomes. Results: 162 episodes of UTI in 115 patients were analyzed. OPAT failure was observed in 16.0 % (n = 26) of episodes, while infection remained unresolved in 8.0 % (n = 13) of episodes. Urolithiasis was an independent risk factor of both OPAT (odds ratio [OR], 4.3; 95 % confidence interval [CI], 1.2–16.1; p = 0.03) and infection failure (OR, 5.9; 95 % CI, 1.2–29.9; p = 0.03). Prior hospitalization also increased the risk of both OPAT (OR, 4.4; 95 % CI, 1.1–18.7; p = 0.04) and infection failure (OR, 8.0, 95 % CI, 1.3–78.4; p = 0.04). Conclusions: These results can assist clinicians at commencement of OPAT to identify patients at high risk of treatment failure. Wider network studies are required to further elicit the role of urolithiasis and its treatment to improve outcomes of UTI management in OPAT