79 research outputs found
Recommended from our members
Implementation of a simplified method for actuation of ferrofluids
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Magnetic actuation of ferrofluids is an emergent field that will open up new possibilities in various fields of engineering. The quality and topology of the magnetic field that is being utilized in such systems is determinant in terms of flow properties, flow rates and overall efficiency. Determining the optimal magnetic
field topology to achieve the desired results, and determining the methods by which these magnetic fields are to be generated are central problems of obtaining the desired flow. A healthy comparison of various magnetic field topologies requires a varied set of examples from the most simplified to most sophisticated. Such comparisons are necessary to have a well grounded starting point. This study focuses on a particular pump design that employs a simplified magnetic field topology to obtain ferrofluid flow. The results of this paper such as flow and pressure difference are intended to form a baseline for future reference.Sabancı University Internal Research Grant, no: IACF09-0064
Capacitive sensing for monitoring of microfluidic protocols using nanolitre dispensing and acoustic mixing
The development of protocols for bio/chemical reaction requires alternate dispensing and mixing steps. Whilst most microfluidic systems use the opening of additional parts of the channel to allow the ingress of fixed volumes of fluid, this requires knowledge of the protocol before the design of the chip. Our approach of using a microfluidic valve to regulate the flow into an initially empty cavity allows for on-chip protocol development and refinement. Mixing is provided by way of surface acoustic wave excitation; this high-frequency vibration causes steady-state streaming flows. We show that capacitive sensing can be used to measure fluid levels, even if multiple fluid types are used, such that nanolitre dispensing accuracy is achieved. Also, the capacitive readout can be used to establish mixing quality and to monitor temperature fluctuations. These capabilities allow for protocols to be conducted without optical assessment, and so will allow for multiplexing, such that reactions could be conducted, simultaneously, in multiple chambers across a chip
Comparison of bulk and microfluidic methods to monitor the phase behaviour of nanoparticles during digestion of lipid-based drug formulations using in situ X-ray scattering.
The performance of orally administered lipid-based drug formulations is crucially dependent on digestion, and understanding the colloidal structures formed during digestion is necessary for rational formulation design. Previous studies using the established bulk pH-stat approach (Hong et al. 2015), coupled to synchrotron small angle X-ray scattering (SAXS), have begun to shed light on this subject. Such studies of digestion using in situ SAXS measurements are complex and have limitations regarding the resolution of intermediate structures. Using a microfluidic device, the digestion of lipid systems may be monitored with far better control over the mixing of the components and the application of enzyme, thereby elucidating a finer understanding of the structural progression of these lipid systems. This work compares a simple T-junction microcapillary device and a custom-built microfluidic chip featuring hydrodynamic flow focusing, with an equivalent experiment with the full scale pH-stat approach. Both microfluidic devices were found to be suitable for in situ SAXS measurements in tracking the kinetics with improved time and signal sensitivity compared to other microfluidic devices studying similar lipid-based systems, and producing more consistent and controllable structural transformations. Particle sizing of the nanoparticles produced in the microfluidic devices were more consistent than the pH-stat approach
Encouraging female entrepreneurship in Jordan: environmental factors, obstacles and challenges
The number of female entrepreneurs and their contribution to the economy is steadily rising. Yet research suggests that female entrepreneurs face more challenges and barriers than their male counterparts. This is expected to be even more prevalent in Islamic contexts, which are characterised by conservative and patriarchal societies. In this research, 254 female business students from a private and a public university responded to a questionnaire that gauges their perceptions about potential barriers to entrepreneurship in Jordan and whether the business education they are receiving helps to prepare them for future entrepreneurial activity. Our results help to form a basis on which a deeper understanding of the phenomena can be achieved through more in depth future research. Among the main environmental factors that worry potential female entrepreneurs are the weakness of Jordanian economy, lack of finance, fear of risk, gender inequality and inability to maintain a work and private life balance. Our results also show that students are really not aware of the opportunities available to them and are unable to make a proper assessment. We call on both universities and the Jordanian government to put more emphasis on practical entrepreneurial education and encouraging women to play a much more active role within the workforce
Elucidation of pathways driving asthma pathogenesis: development of a systems-level analytic strategy.
Asthma is a genetically complex, chronic lung disease defined clinically as episodic airflow limitation and breathlessness that is at least partially reversible, either spontaneously or in response to therapy. Whereas asthma was rare in the late 1800s and early 1900s, the marked increase in its incidence and prevalence since the 1960s points to substantial gene × environment interactions occurring over a period of years, but these interactions are very poorly understood (1-6). It is widely believed that the majority of asthma begins during childhood and manifests first as intermittent wheeze. However, wheeze is also very common in infancy and only a subset of wheezy children progress to persistent asthma for reasons that are largely obscure. Here, we review the current literature regarding causal pathways leading to early asthma development and chronicity. Given the complex interactions of many risk factors over time eventually leading to apparently multiple asthma phenotypes, we suggest that deeply phenotyped cohort studies combined with sophisticated network models will be required to derive the next generation of biological and clinical insights in asthma pathogenesis
Thermally-actuated microfluidic membrane valve for point-of-care applications
Microfluidics has enabled low volume biochemistry reactions to be carried out at the point-of-care. A key component in microfluidics is the microfluidic valve. Microfluidic valves are not only useful for directing flow at intersections but also allow mixtures/dilutions to be tuned real-time and even provide peristaltic pumping capabilities. In the transition from chip-in-a-lab to lab-on-a-chip, it is essential to ensure that microfluidic valves are designed to require less peripheral equipment and that they are transportable. In this paper, a thermally-actuated microfluidic valve is presented. The valve itself is fabricated with off-the-shelf components without the need for sophisticated cleanroom techniques. It is shown that multiple valves can be controlled and operated via a power supply and an Arduino microcontroller; an important step towards transportable microfluidic devices capable of carrying out analytical assays at the point-of-care. It is been calculated that a single actuator costs less than$1, this highlights the potential of the presented valve for scaling out. The valve operation is demonstrated by adjusting the ratio of a water/dye mixture in a continuous flow microfluidic chip with Y-junction channel geometry. The power required to operate one microfluidic valve has been characterised both theoretically and experimentally. Cyclical operation of the valve has been demonstrated for 65 hours with 585 actuations. The presented valve is capable of actuating rectangular microfluidic channels of 500μm×50μm with an expected temperature increase of up to 5°C. The fastest actuation times achieved were 2seconds for valve closing (heating) and 9 seconds for valve opening (cooling)
Image-based single cell sorting automation in droplet microfluidics
The recent boom in single-cell omics has brought researchers one step closer to understanding the biological mechanisms associated with cell heterogeneity. Rare cells that have historically been obscured by bulk measurement techniques are being studied by single cell analysis and providing valuable insight into cell function. To support this progress, novel upstream capabilities are required for single cell preparation for analysis. Presented here is a droplet microfluidic, image-based single-cell sorting technique that is flexible and programmable. The automated system performs real-time dual-camera imaging (brightfield & fluorescent), processing, decision making and sorting verification. To demonstrate capabilities, the system was used to overcome the Poisson loading problem by sorting for droplets containing a single red blood cell with 85% purity. Furthermore, fluorescent imaging and machine learning was used to load single K562 cells amongst clusters based on their instantaneous size and circularity. The presented system aspires to replace manual cell handling techniques by translating expert knowledge into cell sorting automation via machine learning algorithms. This powerful technique finds application in the enrichment of single cells based on their micrographs for further downstream processing and analysis
Microfluidic plug steering using surface acoustic waves
A microfluidic chip capable of steering and unevenly splitting plugs at a Y-junction uses surface acoustic waves.</p
Microfluidic on-demand droplet merging using surface acoustic waves
Digital microfluidic chip merges multiple consecutive droplets (nl) selectively and controllably using surface acoustic waves.</p
Coalescence of surfactant-stabilised adjacent droplets using surface acoustic waves
A novel, on-demand microfluidic droplet merging mechanism is presented in this paper. We demonstrate that a narrow beam surface acoustic wave (SAW), targeted at the oil buffer, causes nearby droplets to coalesce. The lack of direct exposure of the droplet to the excitation stimulus makes this method ideal for sensitive samples as harm will not occur. This powerful technique works on a straight channel with no special design, is not affected by surfactant concentration and droplet volume hence promises seamless integration into existing microfluidic systems. It offers high-throughput, biologically safe, on-demand droplet merging for applications ranging from fast reaction kinetics to microfluidic high throughput screening (uHTS). We thoroughly characterise the physical mechanism triggering droplet-droplet coalescence and observe a cut-off distance from the centre of the acoustic beam to the droplet-droplet interface after which the merging mechanism does not work any more. We establish that the most likely mechanism for merging is acoustic streaming induced droplet deformation
- …