Evidence for polarised boron in Co-B and Fe-B alloys

By exploiting the tunability of synchrotron radiation in measurements of spin-resolved photoemission it has proved possible to obtain information on the polarisation of the valence electrons of Co-B and Fe-B amorphous magnetic alloys, Both the spin-integrated and spin-resolved energy distribution curves show a marked dependence on photon energy indicating that the p states of boron hybridise with the d states of the transition metals giving rise to mixed states in the binding energy range 1 to 5 eV, The observed polarisation and spin-resolved densities of states imply that in the above restricted energy range there is a net negative polarisation of the boron states

Spin- and angle-resolved photoemission studies of the electronic structure of Si(110)"16x2" surfaces

The electronic structure of Si(110)"16 x 2" double-domain, single-domain and 1 x 1 surfaces have been investigated using spin- and angle-resolved photoemission at sample temperatures of 77 K and 300 K. Angle-resolved photoemission was conducted using horizontally- and vertically-polarised 60 eV and 80 eV photons. Band-dispersion maps revealed four surface states ($S_1$ to $S_4$) which were assigned to silicon dangling bonds on the basis of measured binding energies and photoemission intensity changes between horizontal and vertical light polarisations. Three surface states ($S_1$, $S_2$ and $S_4$), observed in the Si(110)"16 x 2" reconstruction, were assigned to Si adatoms and Si atoms present at the edges of the corrugated terrace structure. Only one of the four surface states, $S_3$, was observed in both the Si(110)"16 x 2" and 1 x 1 band maps and consequently attributed to the pervasive Si zigzag chains that are components of both the Si(110)"16 x 2" and 1 x 1 surfaces. A state in the bulk-band region was attributed to an in-plane bond. All data were consistent with the adatom-buckling model of the Si(110)"16 x 2" surface. Whilst room temperature measurements of $P_y$ and $P_z$ were statistically compatible with zero, $P_x$ measurements of the enantiomorphic A-type and B-type Si(110)"16 x 2" surfaces gave small average polarisations of around 1.5\% that were opposite in sign. Further measurements at 77 K on A-type Si(110)"16 x 2" surface gave a smaller value of +0.3\%. An upper limit of $\sim1\%$ may thus be taken for the longitudinal polarisation.Comment: Main paper: 12 pages and 11 figures. Supplemental information: 5 pages and 2 figure

Ultrathin epitaxial Fe films in vicinal GaAs(001): A study by spin-resolved photoelectron spectroscopy

Thin epitaxial Fe films have been grown on vicinal GaAs(001) substrates and their remanent magnetic properties and the degree of substrate atom diffusion investigated using synchrotron-based photoelectron spectroscopy. The vicinal Fe films, though exhibiting greater As diffusion than their singular homologues, displayed better film quality both from the structural and the magnetic points of view. The spin-resolved valence spectra of the vicinal films resemble those for crystalline bulk Fe at lower film thicknesses than for singular films

Measuring Health and Broader Well-Being Benefits in the Context of Opiate Dependence: The Psychometric Performance of the ICECAP-A and the EQ-5D-5L

BACKGROUND: Measuring outcomes in economic evaluations of social care interventions is challenging because both health and well-being benefits are evident. The ICEpop CAPability instrument for adults (ICECAP-A) and the five-level EuroQol five-dimensional questionnaire (EQ-5D-5L) are measures potentially suitable for the economic evaluation of treatments for substance use disorders. Evidence for their validity in this context is, however, lacking. OBJECTIVES: To assess the construct validity of the ICECAP-A and the EQ-5D-5L in terms of convergent and discriminative validity and sensitivity to change on the basis of standard clinical measures (Clinical Outcomes in Routine Evaluation-Outcome Measure, Treatment Outcomes Profile, Interpersonal Support Evaluation List, Leeds Dependence Questionnaire, and Social Satisfaction Questionnaire). METHODS: A secondary analysis of pilot trial data for heroin users in opiate substitution treatment was conducted. Baseline convergence with clinical measures was assessed using the Pearson correlation coefficient. Discriminative validity was assessed using one-way analysis of variance and stepwise regressions. Sensitivity to changes in clinical indicators was assessed at 3 and 12 months using the standardized response mean statistic and parametric and nonparametric testing. RESULTS: Both measures had the same level of construct validity, except for clinical indicators of well-being, for which the ICECAP-A performed better. The ICECAP-A was sensitive to changes in both health and well-being indicators. The EQ-5D-5L had lower levels of sensitivity to change, and a ceiling effect (27%), particularly evident in the dimensions of self-care (89%), mobility (75%), and usual activities (72%). CONCLUSIONS: The findings support the construct validity of both measures, but the ICECAP-A gives more attention to broader impacts and is more sensitive to change. The ICECAP-A shows promise in evaluating treatments for substance use disorders for which recovery is the desired outcome

Preparation of films of a highly aligned lipid cubic phase

We demonstrate a method by which we can produce an oriented film of an inverse bicontinuous cubic phase (QII D) formed by the lipid monoolein (MO). By starting with the lipid as a disordered precursor (the L3 phase) in the presence of butanediol, we can obtain a film of the QII D phase showing a high degree of in-plane orientation by controlled dilution of the sample under shear within a linear flow cell. We demonstrate that the direction of orientation of the film is different from that found in the oriented bulk material that we have reported previously; therefore, we can now reproducibly form QII D samples oriented with either the [110] or the [100] axis aligned in the flow direction depending on the method of preparation. The deposition of MO as a film, via a moving fluid− air interface that leaves a coating of MO in the L3 phase on the capillary wall, leads to a sample in the [110] orientation. This contrasts with the bulk material that we have previously demonstrated to be oriented in the [100] direction, arising from flow producing an oriented bulk slug of material within the capillary tube. The bulk sample contains significant amounts of residual butanediol, which can be estimated from the lattice parameter of the QII D phase obtained. The sample orientation and lattice parameters are determined from synchrotron small-angle X-ray scattering patterns and confirmed by simulations. This has potential applications in the production of template materials and the growth of protein crystals for crystallography as well as deepening our understanding of the mechanisms underlying the behavior of lyotropic liquid-crystal phases

Liquid crystal alignment induced by micron-scale patterned surfaces

Induced bulk orientation of nematic liquid crystal in contact with micron-scale patterned surfaces is investigated using the Landau-de Gennes theory by means of three-dimensional simulations. The effect of the size and spacing of square cross-sectional well and post patterns is investigated and shown to influence the orientation of the liquid crystal bulk, far removed from the surface. Additionally, the effective anchoring strength of the induced alignment is estimated using a modified version of the torque balance method. Both azimuthal and zenithal multistability are shown to exist within unique ranges of feature sizes

Sub-Angstrom Microscopy Through Incoherent Imaging and Image Reconstruction

Z-contrast scanning transmission electron microscopy (STEM) with a high-angle annular detector breaks the coherence of the imaging process, and provides an incoherent image of a crystal projection. Even in the presence of strong dynamical diffraction, the image can be accurately described as a convolution between an object function, sharply peaked at the projected atomic sites, and the probe intensity profile. Such an image can be inverted intuitively without the need for model structures, and therefore provides the important capability to reveal unanticipated interfacial arrangements. It represents a direct image of the crystal projection, revealing the location of the atomic columns and their relative high-angle scattering power. Since no phase is associated with a peak in the object function or the contrast transfer function, extension to higher resolution is also straightforward. Image restoration techniques such as maximum entropy, in conjunction with the 1.3 A probe anticipated for a 300 kV STEM, appear to provide a simple and robust route to the achievement of sub-Angstrom resolution electron microscopy

rs5888 Variant of SCARB1 Gene Is a Possible Susceptibility Factor for Age-Related Macular Degeneration

Major genetic factors for age-related macular degeneration (AMD) have recently been identified as susceptibility risk factors, including variants in the CFH gene and the ARMS2 LOC387715/HTRA1locus. Our purpose was to perform a case-control study in two populations among individuals who did not carry risk variants for CFHY402H and LOC387715 A69S (ARMS2), called “study” individuals, in order to identify new genetic risk factors. Based on a candidate gene approach, we analyzed SNP rs5888 of the SCARB1 gene, coding for SRBI, which is involved in the lipid and lutein pathways. This study was conducted in a French series of 1241 AMD patients and 297 controls, and in a North American series of 1257 patients with advanced AMD and 1732 controls. Among these individuals, we identified 61 French patients, 77 French controls, 85 North American patients and 338 North American controls who did not carry the CFH nor ARMS2 polymorphisms. An association between AMD and the SCARB1 gene was seen among the study subjects. The genotypic distribution of the rs5888 polymorphism was significantly different between cases and controls in the French population (p<0.006). Heterozygosity at the rs5888 SNP increased risk of AMD compared to the CC genotypes in the French study population (odds ratio (OR) = 3.5, CI95%: 1.4–8.9, p<0.01) and after pooling the 2 populations (OR = 2.9, 95% CI: 1.6–5.3, p<0.002). Subgroup analysis in exudative forms of AMD revealed a pooled OR of 3.6 for individuals heterozygous for rs5888 (95% CI: 1.7–7.6, p<0.0015). These results suggest the possible contribution of SCARB1, a new genetic factor in AMD, and implicate a role for cholesterol and antioxidant micronutrient (lutein and vitamin E) metabolism in AMD

Effect of vessel wettability on the foamability of "ideal" surfactants and "real-world" beer heads

The ability to tailor the foaming properties of a solution by controlling its chemical composition is highly desirable and has been the subject of extensive research driven by a range of applications. However, the control of foams by varying the wettability of the foaming vessel has been less widely reported. This work investigates the effect of the wettability of the side walls of vessels used for the in situ generation of foam by shaking aqueous solutions of three different types of model surfactant systems (non-ionic, anionic and cationic surfactants) along with four different beers (Guinness Original, Banks’s Bitter, Bass No 1 and Harvest Pale). We found that hydrophilic vials increased the foamability only for the three model systems but increased foam stability for all foams except the model cationic system. We then compared stability of beer foams produced by shaking and pouring and demonstrated weak qualitative agreement between both foam methods. We also showed how wettability of the glass controls bubble nucleation for beers and champagne and used this effect to control exactly where bubbles form using simple wettability patterns

Capitals and commitment. The case of a local learning and employment network.

This article draws on research undertaken with a Local Learning and Employment Network (LLEN) in the state of Victoria, Australia. LLEN are networks that were implemented by the state government in 2001 to undertake community capacity building through which the outcomes of young people aged 15-19 in education, training and employment would be enhanced. In 2008, in the context of an enhanced federal commitment to social inclusion through ‘joining-up’, the Victorian experience provides insights on the implications of such policy initiatives. Drawing on Bourdieu’s discussion of the forms of capital and Granovetter’s notion of the strength of weak ties, I argue that stores of economic, cultural and social capital as outlined by Bourdieu were necessary, but insufficient, for LLEN to achieve the objectives with which they were charged given the failure of government to follow through on the implications of its policies. I argue for a commitment on the part of all stakeholders to realise the potential of ‘joining-up’