168 research outputs found
Can Structural Timber Foster Short Procurement Chains within Mediterranean Forests? A Research Case in Sardinia
Background and Purpose: The aim of this paper is to present the idea of a timber short procurement chain as a means to provide an increased value to Mediterranean forests. It is based on the evidence that timber buildings are increasingly used for a number of reasons including sustainability, the speed of erection, and excellent structural and seismic performance. However, most of the timber currently used around the Mediterranean is imported from outside this area.
Materials and Methods: The idea is to use the best part of the tree to produce timber boards, while all the remaining part of the tree including the production waste is used for energy production. Important issues to address are the generally low mechanical properties of locally-grown timber such as maritime pine in Sardinia, which would make some wood-based products such as glue-laminated timber not technically viable. Cross-laminated timber panels are a possible solution to this problem because this wood-based product is manufactured in such a way that even with low-quality timber boards it is possible to obtain a medium quality panel. The panel is made of layers of timber boards with the adjacent layers glued under pressure at a right angle. Another issue is the need to grade the local timber, for which a number of specimens must be tested to destruction in order to identify a visual or a machine-stress grading procedure. Last but not least, the panels must be tested to destruction to correlate their mechanical properties to the properties of the boards.
Results: The preliminary mechanical tests carried out on Sardinia maritime pine confirm that the material is low-grade because it is characterized by large knots and a significant grain deviation. Nevertheless, when used in the cross-laminated panels, the properties are significantly improved due to the layout of the panel which reduces the influence of defects in the boards on the mechanical properties of the panel.
Conclusions: A timber short procurement chain is a possible means to create job opportunities and reduce depopulation, which is particularly important in several regions of the Mediterranean. By adding value to the forests by means of timber production used in prefabricated components employed in low-rise timber buildings, it is also possible to improve forest management and even extend forested areas which have all positive effects on the environment, the landscape and the reduction of hydrogeological hazard
A Novel differential to single-ended converter for ultra-low-voltage inverter-based OTAs
For the design of inverter-based OTAs with differential input and single-ended output, the
differential to single-ended (D2S) converter is a key building block. In fact, the performance of the D2S strongly affects the overall common-mode rejection ratio (CMRR) and input common-mode range (ICMR) of the whole OTA. In recent literature, inverter-based OTAs rely on a D2S topology based on an inverter driving another inverter with the input and output tight together which behaves as a “diode" connected device to implement a voltage gain approximately equal to -1. However, since this approach is based on the matching of the inverters, the performance of this D2S results sensitive to PVT variations if the bias point of the inverters is not properly stabilized. In this paper we present a novel topology of inverterbased D2S converter, exploiting an auxiliary, standard-cell-based, error amplifier and a local feedback loop. The proposed D2S, compared to the conventional one, exhibits higher CMRR, improved ICMR and better robustness with respect to PVT variations.We present also an ULV, standard-cell-based OTA, which exploits the proposed D2S converter and shows excellent performance figures of merit with low area footprint
Using the electron spin resonance to detect the functional centers in materials for sensor devices
AbstractThe paper reports and comments the results of several electron spin resonance investigations, performed on semiconductor oxides for gas sensing. The main aspects, related to the comparison between spectroscopic and electric data, are concerning on (i) the role of the oxide defects in interacting with the gas atmosphere; (ii) the origin of the sensing enhancement, which follows the doping of the oxide by transition metal ions; and (iii) the effects of different particle morphology and of the controlled particle shape on the sensing functionality. The electron spin resonance results have been associated, when possible, to those deriving from X-ray photoelectron spectroscopy, in order to investigate the electronic configuration of the transition metal centers. Special emphasis has been deserved to the oxide synthesis procedures, in several cases well related to the electrical response. The data have been drawn from several studies, performed in different time periods, and have been compared to suggest a possible common interpretation of the sensing mechanism, based on either electronic or morphological properties
A 0.3 V, rail-to-rail, ultralow-power, non-tailed, body-driven, sub-threshold amplifier
A novel, inverter-based, fully differential, body-driven, rail-to-rail, input stage topology is
proposed in this paper. The input stage exploits a replica bias control loop to set the common mode
current and a common mode feed-forward strategy to set its output common mode voltage. This
novel cell is used to build an ultralow voltage (ULV), ultralow-power (ULP), two-stage, unbuffered
operational amplifier. A dual path compensation strategy is exploited to improve the frequency
response of the circuit. The amplifier has been designed in a commercial 130 nm CMOS technology
from STMicroelectronics and is able to operate with a nominal supply voltage of 0.3 V and a power
consumption as low as 11.4 nW, while showing about 65 dB gain, a gain bandwidth product around
3.6 kHz with a 50 pF load capacitance and a common mode rejection ratio (CMRR) in excess of
60 dB. Transistor-level simulations show that the proposed circuit outperforms most of the state
of the art amplifiers in terms of the main figures of merit. The results of extensive parametric and
Monte Carlo simulations have demonstrated the robustness of the proposed circuit to PVT and
mismatch variations
A 0.3V Rail-to-Rail Three-Stage OTA With High DC Gain and Improved Robustness to PVT Variations
This paper presents a novel 0.3V rail-to-rail body-driven three-stage operational transconductance amplifier (OTA). The proposed OTA architecture allows achieving high DC gain in spite of the bulk-driven input. This is due to the doubled body transconductance at the first and third stages, and to a high gain, gate-driven second stage. The bias current in each branch of the OTA is accurately set through gate-driven or bulk-driven current mirrors, thus guaranteeing an outstanding stability of main OTA performance parameters to PVT variations. In the first stage, the input signals drive the bulk terminals of both NMOS and PMOS transistors in a complementary fashion, allowing a rail-to-rail input common mode range (ICMR). The second stage is a gate-driven, complementary pseudo-differential stage with an high DC gain and a local CMFB. The third stage implements the differential-to-single-ended conversion through a body-driven complementary pseudo-differential pair and a gate-driven current mirror. Thanks to the adoption of two fully differential stages with common mode feedback (CMFB) loop, the common-mode rejection ratio (CMRR) in typical conditions is greatly improved with respect to other ultra-low-voltage (ULV) bulk-driven OTAs. The OTA has been fabricated in a commercial 130nm CMOS process from STMicroelectronics. Its area is about 0.002 mm2 , and power consumption is less than 35nW at the supply-voltage of 0.3V. With a load capacitance of 35pF, the OTA exhibits a DC gain and a unity-gain frequency of about 85dB and 10kHz, respectively
Post-Fatigue Fracture Resistance of Lithium Disilicate and Polymer-Infiltrated Ceramic Network Indirect Restorations over Endodontically-Treated Molars with Different Preparation Designs: An In-Vitro Study
A 0.3 V rail-to-rail ultra-low-power OTA with improved bandwidth and slew rate
In this paper, we present a novel operational transconductance amplifier (OTA) topology
based on a dual-path body-driven input stage that exploits a body-driven current mirror-active
load and targets ultra-low-power (ULP) and ultra-low-voltage (ULV) applications, such as IoT or
biomedical devices. The proposed OTA exhibits only one high-impedance node, and can therefore
be compensated at the output stage, thus not requiring Miller compensation. The input stage
ensures rail-to-rail input common-mode range, whereas the gate-driven output stage ensures both
a high open-loop gain and an enhanced slew rate. The proposed amplifier was designed in an
STMicroelectronics 130 nm CMOS process with a nominal supply voltage of only 0.3 V, and it
achieved very good values for both the small-signal and large-signal Figures of Merit. Extensive
PVT (process, supply voltage, and temperature) and mismatch simulations are reported to prove the
robustness of the proposed amplifier
Phyto-Friendly Soil Bacteria and Fungi Provide Beneficial Outcomes in the Host Plant by Differently Modulating Its Responses through (In)Direct Mechanisms
Sustainable agricultural systems based on the application of phyto-friendly bacteria and fungi are increasingly needed to preserve soil fertility and microbial biodiversity, as well as to reduce the use of chemical fertilizers and pesticides. Although there is considerable attention on the potential applications of microbial consortia as biofertilizers and biocontrol agents for crop management, knowledge on the molecular responses modulated in host plants because of these beneficial associations is still incomplete. This review provides an up-to-date overview of the different mechanisms of action triggered by plant-growth-promoting microorganisms (PGPMs) to promote host-plant growth and improve its defense system. In addition, we combined available gene-expression profiling data from tomato roots sampled in the early stages of interaction with Pseudomonas or Trichoderma strains to develop an integrated model that describes the common processes activated by both PGPMs and highlights the host’s different responses to the two microorganisms. All the information gathered will help define new strategies for the selection of crop varieties with a better ability to benefit from the elicitation of microbial inoculants
- …