324 research outputs found
Evanescent straight tapered-fiber coupling of ultra-high Q optomechanical micro-resonators in a low-vibration helium-4 exchange-gas cryostat
We developed an apparatus to couple a 50-micrometer diameter
whispering-gallery silica microtoroidal resonator in a helium-4 cryostat using
a straight optical tapered-fiber at 1550nm wavelength. On a top-loading probe
specifically adapted for increased mechanical stability, we use a
specifically-developed "cryotaper" to optically probe the cavity, allowing thus
to record the calibrated mechanical spectrum of the optomechanical system at
low temperatures. We then demonstrate excellent thermalization of a 63-MHz
mechanical mode of a toroidal resonator down to the cryostat's base temperature
of 1.65K, thereby proving the viability of the cryogenic refrigeration via heat
conduction through static low-pressure exchange gas. In the context of
optomechanics, we therefore provide a versatile and powerful tool with
state-of-the-art performances in optical coupling efficiency, mechanical
stability and cryogenic cooling.Comment: 8 pages, 6 figure
Cavity optomechanics with ultra-high Q crystalline micro-resonators
We present the first observation of optomechanical coupling in ultra-high Q
crystalline whispering-gallery-mode (WGM) resonators. The high purity of the
crystalline material enables optical quality factors in excess of 10^{10} and
finesse exceeding 10^{6}. Simultaneously, mechanical quality factors greater
than 10^{5} are obtained, still limited by clamping losses. Compared to
previously demonstrated cylindrical resonators, the effective mass of the
mechanical modes can be dramatically reduced by the fabrication of CaF2
microdisc resonators. Optical displacement monitoring at the 10^{-18}
m/sqrt{Hz}-level reveals mechanical radial modes at frequencies up to 20 MHz,
corresponding to unprecedented sideband factors (>100). Together with the weak
intrinsic mechanical damping in crystalline materials, such high sindeband
factors render crystalline WGM micro-resonators promising for backaction
evading measurements, resolved sideband cooling or optomechanical normal mode
splitting. Moreover, these resonators can operate in a regime where
optomechanical Brillouin lasing can become accessible
Optomechanically induced transparency
Coherent interaction of laser radiation with multilevel atoms and molecules
can lead to quantum interference in the electronic excitation pathways. A
prominent example observed in atomic three-level-systems is the phenomenon of
electromagnetically induced transparency (EIT), in which a control laser
induces a narrow spectral transparency window for a weak probe laser beam. The
concomitant rapid variation of the refractive index in this spectral window can
give rise to dramatic reduction of the group velocity of a propagating pulse of
probe light. Dynamic control of EIT via the control laser enables even a
complete stop, that is, storage, of probe light pulses in the atomic medium.
Here, we demonstrate optomechanically induced transparency (OMIT)--formally
equivalent to EIT--in a cavity optomechanical system operating in the resolved
sideband regime. A control laser tuned to the lower motional sideband of the
cavity resonance induces a dipole-like interaction of optical and mechanical
degrees of freedom. Under these conditions, the destructive interference of
excitation pathways for an intracavity probe field gives rise to a window of
transparency when a two-photon resonance condition is met. As a salient feature
of EIT, the power of the control laser determines the width and depth of the
probe transparency window. OMIT could therefore provide a new approach for
delaying, slowing and storing light pulses in long-lived mechanical excitations
of optomechanical systems, whose optical and mechanical properties can be
tailored in almost arbitrary ways in the micro- and nano-optomechanical
platforms developed to date
Optical frequency comb generation from a monolithic microresonator
Optical frequency combs provide equidistant frequency markers in the
infrared, visible and ultra-violet and can link an unknown optical frequency to
a radio or microwave frequency reference. Since their inception frequency combs
have triggered major advances in optical frequency metrology and precision
measurements and in applications such as broadband laser-based gas sensing8 and
molecular fingerprinting. Early work generated frequency combs by intra-cavity
phase modulation while to date frequency combs are generated utilizing the
comb-like mode structure of mode-locked lasers, whose repetition rate and
carrier envelope phase can be stabilized. Here, we report an entirely novel
approach in which equally spaced frequency markers are generated from a
continuous wave (CW) pump laser of a known frequency interacting with the modes
of a monolithic high-Q microresonator13 via the Kerr nonlinearity. The
intrinsically broadband nature of parametric gain enables the generation of
discrete comb modes over a 500 nm wide span (ca. 70 THz) around 1550 nm without
relying on any external spectral broadening. Optical-heterodyne-based
measurements reveal that cascaded parametric interactions give rise to an
optical frequency comb, overcoming passive cavity dispersion. The uniformity of
the mode spacing has been verified to within a relative experimental precision
of 7.3*10(-18).Comment: Manuscript and Supplementary Informatio
Determination of the vacuum optomechanical coupling rate using frequency noise calibration
The strength of optomechanical interactions in a cavity optomechanical system
can be quantified by a vacuum coupling rate \vcr analogous to cavity quantum
electrodynamics. This single figure of merit removes the ambiguity in the
frequently quoted coupling parameter defining the frequency shift for a given
mechanical displacement, and the effective mass of the mechanical mode. Here we
demonstrate and verify a straightforward experimental technique to derive the
vacuum optomechanical coupling rate. It only requires applying a known
frequency modulation of the employed electromagnetic probe field and knowledge
of the mechanical oscillator's occupation. The method is experimentally
verified for a micromechanical mode in a toroidal whispering-gallery-resonator
and a nanomechanical oscillator coupled to a toroidal cavity via its near
field.Comment: 11 pages, 2 figure
Stroboscopic quantum optomechanics
We consider an optomechanical cavity that is driven stroboscopically by a
train of short pulses. By suitably choosing the inter-pulse spacing we show
that ground-state cooling and mechanical squeezing can be achieved, even in the
presence of mechanical dissipation and for moderate radiation-pressure
interaction. We provide a full quantum-mechanical treatment of stroboscopic
backaction-evading measurements, for which we give a simple analytic insight,
and discuss preparation and verification of squeezed mechanical states. We
further consider stroboscopic driving of a pair of non-interacting mechanical
resonators coupled to a common cavity field, and show that they can be
simultaneously cooled and entangled. Stroboscopic quantum optomechanics extends
measurement-based quantum control of mechanical systems beyond the good-cavity
limit.Comment: 9 + 4 pages, 5 figure
Cooling of a micro-mechanical oscillator using radiation pressure induced dynamical back-action
Cooling of a 58 MHz micro-mechanical resonator from room temperature to 11 K
is demonstrated using cavity enhanced radiation pressure. Detuned pumping of an
optical resonance allows enhancement of the blue shifted motional sideband
(caused by the oscillator's Brownian motion) with respect to the red-shifted
sideband leading to cooling of the mechanical oscillator mode. The reported
cooling mechanism is a manifestation of the effect of radiation pressure
induced dynamical backaction. These results constitute an important step
towards achieving ground state cooling of a mechanical oscillator.Comment: accepted for publication (Phys. Rev. Lett.
Type IV Duane Syndrome
Purpose
To identify cases of synergistic divergence whose characteristics suggest that this entity is a form of Duane syndrome.
Methods
The records of all patients with a Duane syndrome diagnosis, including standardized eye position photographs, from the E-Consultation program of Cybersight, Orbis International were analyzed.
Results
A total of 350 Duane syndrome cases were identified. Of these, 19 (5%) had features consistent with synergistic divergence, or type 4 Duane syndrome. Of the 19, 16 (84%) were male, 15 (79%) had palpebral fissure narrowing, all had anomalous head posture, and 18 (95%) were exotropic. Only 9 (47%) patients were reported to have undergone surgery.
Conclusions
Synergistic divergence is a rare entity with features similar to those of Duane syndrome. We suggest that this entity be classified as type 4 Duane syndrome, because it has unique findings and an innervation pattern that differs from the other 3 recognized types
Tunable pulse delay and advancement in a coupled nanomechanical resonator-superconducting microwave cavity system
We theoretically study the transmission of a weak probe field under the
influence of a strong pump field in a coupled nanomechanical
resonator-superconducting microwave cavity system. Using the standard
input-output theory, we find that both pulse delay (slow light effect) and
advancement (fast light effect) of the probe field can appear in this coupled
system provided that we choose the suitable detuning of the pump field from
cavity resonance. The magnitude of the delay (advancement) can be tuned
continuously by adjusting the power of the pump field. This technique
demonstrates great potential in applications including microwave phase shifter
and delay line.Comment: 12pages, 3 figure
- …