2,119 research outputs found

    Mutual Fund Advisory Fees--Too Much for Too Little?

    Get PDF

    Summary of tower designs for large horizontal axis wind turbines

    Get PDF
    Towers for large horizontal axis wind turbines, machines with a rotor axis height above 30 meters and rated at more than 500 kW, have varied in configuration, materials of construction, type of construction, height, and stiffness. For example, the U.S. large HAWTs have utilized steel truss type towers and free-standing steel cylindrical towers. In Europe, the trend has been to use only free-standing and guyed cylindrical towers, but both steel and reinforced concrete have been used as materials of construction. These variations in materials of construction and type of construction reflect different engineering approaches to the design of cost effective towers for large HAWTs. Tower designs are the NASA/DOE Mod-5B presently being fabricated. Design goals and requirements that influence tower configuration, height and materials are discussed. In particular, experiences with United States large wind turbine towers are elucidated. Finally, current trends in tower designs for large HAWTs are highlighted

    Experimental profiles of velocity components and radial pressure distributions in a vortex contained in a short cylindrical chamber

    Get PDF
    Velocity components and radial pressure distributions in vortex contained in short cylindrical chambe

    Effect of rotor configuration on guyed tower and foundation designs and estimated costs for intermediate site horizontal axis wind turbines

    Get PDF
    Three designs of a guyed cylindrical tower and its foundation for an intermediate size horizontal axis wind turbine generator are discussed. The primary difference in the three designs is the configuration of the rotor. Two configurations are two-blade rotors with teetering hubs - one with full span pitchable blades, the other with fixed pitch blades. The third configuration is a three-bladed rotor with a rigid hub and fixed pitch blades. In all configurations the diameter of the rotor is 38 meters and the axis of rotation is 30.4 meters above grade, and the power output is 200 kW and 400 kW. For each configuration the design is based upon for the most severe loading condition either operating wind or hurricane conditions. The diameter of the tower is selected to be 1.5 meters (since it was determined that this would provide sufficient space for access ladders within the tower) with guy rods attached at 10.7 meters above grade. Completing a design requires selecting the required thicknesses of the various cylindrical segments, the number and diameter of the guy rods, the number and size of soil anchors, and the size of the central foundation. The lower natural frequencies of vibration are determined for each design to ensure that operation near resonance does not occur. Finally, a cost estimate is prepared for each design. A preliminary design and cost estimate of a cantilever tower (cylindrical and not guyed) and its foundation is also presented for each of the three configurations

    Panax notoginseng (Burk.) effects on fibrinogen and lipid plasma level in rats fed on a high-fat diet

    Get PDF
    Several studies have shown that notoginsenoides improve diastolic function in hypertensive subjects, induce the fibrinolytic system in in vitro models and act as antiproliferative agents on vessel leiomyocytes. Our aim was to evaluate their effect on fibrinogen and lipid plasma levels compared with a well-known HMGCoA reductase inhibitor. Seventy Wistar male adult rats on a fat-enriched diet were treated orally with P. notoginseng pulverized root (43 mg/kg/day or 86 mg/kg/day; 20 animals per group), fluvastatin (3 mg/kg/day; 20 animals) or physiological saline (5 mL/kg/day; 10 animals). The ten rats on a normocaloric diet were also treated with 5 mL/kg/day of physiological saline. After a 28-day treatment, the rats were killed and their blood analysed with standard procedures. Treatment with 43 mg/kg/day of P. notoginseng or 3 mg/kg/day of fluvastatin showed similar activity in decreasing total cholesterol (-23.70%, -19.29%, respectively) and triglycerides (-21.59%, -18.55%). The most evident effect of P. notoginseng was the reduction of fibrinogenaemia in treated rats compared with the control values (-38.10%; p < 0.001), no dose-relationship being shown in this effect. Moreover, no significant variation in HDL cholesterol and glucose levels was observed nor did relevant behavioural changes occur in association with the root intake. Besides a moderate, non dose-related decrease in the plasma lipid levels, P. notoginseng appeared to induce a significant reduction in the rat fibrinogenaemia. Copyrigh

    Statistical Reliability Estimation of Microprocessor-Based Systems

    Get PDF
    What is the probability that the execution state of a given microprocessor running a given application is correct, in a certain working environment with a given soft-error rate? Trying to answer this question using fault injection can be very expensive and time consuming. This paper proposes the baseline for a new methodology, based on microprocessor error probability profiling, that aims at estimating fault injection results without the need of a typical fault injection setup. The proposed methodology is based on two main ideas: a one-time fault-injection analysis of the microprocessor architecture to characterize the probability of successful execution of each of its instructions in presence of a soft-error, and a static and very fast analysis of the control and data flow of the target software application to compute its probability of success. The presented work goes beyond the dependability evaluation problem; it also has the potential to become the backbone for new tools able to help engineers to choose the best hardware and software architecture to structurally maximize the probability of a correct execution of the target softwar

    Viroids of grapevines in Italy

    Get PDF
    Rebviroide in ItalienEs wird über das Vorkommen niedermolekularer RNAs bei 48 Vitis-vinifera-Stämmen und 15 amerikanischen Vitis-Arten und Kreuzungen aus Italien, Osteuropa, Mittelmeer- und Nahost-Ländern berichtet. In den Sämlingen zweier Sorten wurden keine derartigen RNAs gefunden. Aufgrund ihres elektrophoretischen Verhaltens wurden diese RNAs vorläufig identifiziert als Grapevine yellow speckle-Viroid (GYSVd), Grapeivine-Viroid 2 (GVd2) und Hop stunt-Viroid (HSVd). Das letztere Viroid löste bei künstlich infizierten Pflanzen von Tomate cv. Rutgers und Gurke cv. Suyo Befallssymptome aus. HSVd, GYSVd und GVd2 wurden in 97, 92 bzw. 11 % der untersuchten Proben wiedergefunden. In der Regel lagen Mischinfektionen vor, wobei die Kombination von HSVd mit GYSVd überwog. Diese beiden Viroide kamen regelmäßig in Reben mit den Symptomen von Yellow speckle oder Vein banding vor. Es wurde keine eindeutige Beziehung zwischen dem Vorkommen eines der Viroide und Rebkrankheiten mit unklarer Ätiologie, wie Vein necrosis oder Fleck, gefunden
    corecore